NEET-PG 2013 Practice Questions

Q: What is the definition of conscious sedation?

Sedation with ability to respond to verbal commands. ***Sedation with ability to respond to verbal commands*** - Conscious sedation involves a drug-induced depression of consciousness during which the patient **retains the ability to respond purposefully to verbal commands**. - This level of sedation ensures that the patient's **airway reflexes** and **ventilatory function** remain intact. *CNS depression with unconsciousness* - This describes **general anesthesia** or **deep sedation**, where the patient is unable to respond purposefully to verbal commands. - In such states, spontaneous ventilation may be **inadequate**, and **airway support** is often required. *Sedation with inability to respond to verbal commands* - This definition aligns with **deep sedation** or **general anesthesia**, where the patient's consciousness is significantly depressed. - At this level, patients may require assistance in maintaining a **patent airway** and adequate ventilation. *None of the options* - This option is incorrect because one of the provided definitions accurately describes conscious sedation. - The definition of conscious sedation is well-established in clinical practice, emphasizing the **preservation of responsiveness**.

Q: Drug of choice for Bier's block ?

Lidocaine. ***Lidocaine*** - **Lidocaine** is the preferred local anesthetic for **Bier's block** (intravenous regional anesthesia) due to its rapid onset and good safety profile. - Its relatively short duration of action and **minimal cardiotoxicity** upon systemic release are favorable for this technique. *Bupivacaine* - **Bupivacaine** has a **longer duration of action** and is associated with a higher risk of **cardiotoxicity** when inadvertently delivered systemically, making it less suitable for Bier's block. - Its use in Bier's block is generally avoided due to the potential for significant adverse events if the tourniquet malfunctions or is released prematurely. *Etidocaine* - **Etidocaine** is a potent, **long-acting local anesthetic** with a similar toxicity profile to bupivacaine, making it less ideal for Bier's block. - Its prolonged action and higher potential for systemic toxicity make it less favorable for a procedure where rapid washout and lower systemic risk are desired. *Ropivacaine* - **Ropivacaine** is an amide-type local anesthetic with a similar efficacy to bupivacaine but with a **lower potential for cardiotoxicity**. - While safer than bupivacaine, **lidocaine** is still generally preferred for Bier's block due to its established safety record, faster onset, and lower cost.

Q: The best local anesthetic for prolonged ophthalmic surgery requiring extended post-operative analgesia is:

Bupivacaine. ***Bupivacaine*** - **Bupivacaine** is an amide-type local anesthetic known for its **long duration of action** due to its high protein binding and lipid solubility. - This property makes it ideal for procedures requiring **prolonged analgesia**, such as extended ophthalmic surgery and post-operative pain control. *Tetracaine* - **Tetracaine** is an ester-type local anesthetic primarily used for **topical anesthesia**, especially in ophthalmology. - While effective for surface anesthesia, its duration of action is relatively short, making it unsuitable for prolonged surgical procedures requiring sustained nerve block. *Procaine* - **Procaine** is an ester-type local anesthetic with a **short duration of action** and is generally associated with a higher incidence of allergic reactions. - It is rarely used today for major regional blocks due to its limited potency and short effect, unlike the requirement for prolonged ophthalmic surgery. *Prilocaine* - **Prilocaine** is an amide-type local anesthetic with an **intermediate duration of action**. - Its use is limited in some cases due to its potential to cause **methemoglobinemia** at higher doses, making it less suitable for applications requiring extensive or prolonged regional anesthesia compared to bupivacaine.

Q: Which anesthetic agent is known for providing smooth induction?

Isoflurane. ***Isoflurane*** - **Isoflurane** is frequently chosen for its capacity to induce a **smooth and rapid loss of consciousness**, primarily due to its low blood solubility which facilitates quick changes in anesthetic depth. - Its **minimal irritation** to the respiratory tract and **stable cardiovascular profile** during induction contribute to a smoother process for the patient. *Sevoflurane* - While sevoflurane also offers a **smooth and rapid induction** due to its low solubility, it is sometimes associated with a higher incidence of **airway irritation** (e.g., coughing) compared to isoflurane, especially in children. - It is known for its **pleasant odor**, making it a good choice for mask induction in pediatric patients. *Halothane* - **Halothane** provides a relatively smooth induction but has a higher risk of **hepatotoxicity** and cardiac arrhythmias, which have led to its decreased use. - Its higher blood solubility means a **slower onset and offset** compared to modern volatile agents like isoflurane. *Enflurane* - **Enflurane** can cause **CNS excitation** at deeper levels of anesthesia, potentially leading to seizures, making its induction less smooth and predictable. - It also has a greater potential to cause **myocardial depression** and arrhythmias than isoflurane.

Q: Percentage of adrenaline with lignocaine for local infiltration is?

1:50000. ***1:50000*** - This concentration of **adrenaline (epinephrine)** is commonly used with **lignocaine (lidocaine)** for local infiltration to prolong the anesthetic effect and reduce bleeding. - At this concentration, adrenaline acts as a **vasoconstrictor**, decreasing systemic absorption of lignocaine and allowing a higher dose locally. *1:1000* - This concentration of adrenaline is typically used for the treatment of **anaphylaxis** and is considered too high for local infiltration with lignocaine. - Using such a high concentration locally can lead to severe **vasoconstriction**, tissue ischemia, and systemic side effects like **tachycardia** and **hypertension**. *1:10000* - This concentration is too strong for routine local infiltration and is usually reserved for **cardiac arrest** protocols or severe anaphylaxis when administered intravenously. - It would carry a significant risk of **tissue damage** and systemic effects if used for local infiltration. *1:200000* - While sometimes used, **1:50000** is generally the more common and effective concentration for achieving **hemostasis** and prolonging anesthesia during local infiltration. - A 1:200000 concentration provides a lesser degree of **vasoconstriction**, potentially leading to less prolonged local anesthetic effect and reduced bleeding control compared to 1:50000.

Q: Which imaging modality delivers the highest dose of radiation?

Cardiac perfusion scan. ***Cardiac perfusion scan*** - A **cardiac perfusion scan (nuclear cardiology)** involves the administration of a radioactive tracer, and the radiation dose can be significant due to the nature and energy of the isotopes used. - While varying, the effective dose for these scans can range from **10 to 30 mSv**, placing it among some of the highest radiation exposures from medical imaging. *CT scan of the chest* - A **CT scan of the chest** provides a relatively high radiation dose compared to plain X-rays, typically ranging from **5 to 7 mSv**. - This is generally lower than some nuclear medicine studies, particularly complex or prolonged cardiac perfusion scans. *Mammogram* - A **mammogram** involves a relatively low dose of radiation, typically in the range of **0.2 to 0.7 mSv**. - Its objective is to image the breast tissue with minimal exposure, making it one of the lower-dose imaging modalities available. *CT scan of the brain* - A **CT scan of the brain** usually delivers a moderate radiation dose, estimated to be around **1 to 2 mSv**. - This is often less than a chest CT due to the smaller volume and different shielding considerations, and significantly less than a cardiac perfusion scan.

Q: Gyromagnetic property of proton is seen in -

MRI. ***MRI*** - Magnetic Resonance Imaging (MRI) relies on the **gyromagnetic properties of protons**, primarily hydrogen nuclei in water and fat. - These protons align with a strong magnetic field and, when pulsed with radiofrequency waves, emit detectable signals that form the image. *CT* - Computed Tomography (CT) utilizes **X-rays** and their differential absorption by various tissues to create cross-sectional images. - It does not involve the gyromagnetic properties of protons. *PET scan* - Positron Emission Tomography (PET) scans detect **gamma rays** emitted from radiotracers, typically radionuclides like Fluorine-18, that accumulate in metabolically active tissues. - This imaging modality is based on radioactive decay, not proton spin. *USG* - Ultrasonography (USG) generates images by sending **high-frequency sound waves** into the body and detecting the echoes that bounce back from various tissues. - It relies on acoustic properties and tissue interfaces, not magnetic properties of protons.

Q: Frequency of ultrasound waves in USG -

>2 MHz. ***>2 MHz*** - Medical diagnostic ultrasound typically uses frequencies in the **range of 2-15 MHz**, with some applications extending from 1-20 MHz. - Frequencies **above 2 MHz** are considered the standard for diagnostic ultrasonography, providing adequate **spatial resolution** and tissue penetration for imaging internal structures. - **Frequency selection** depends on the application: - **2-5 MHz**: Deep structures (abdominal, obstetric imaging) - better penetration - **5-10 MHz**: Vascular studies, cardiac imaging - **7-15 MHz**: Superficial structures (thyroid, breast, musculoskeletal) - better resolution - Higher frequencies provide better resolution but less penetration; the choice represents a trade-off based on clinical needs. *2000 Hz* - This frequency (2 kHz) falls within the **audible range** for humans (20 Hz to 20 kHz). - Such low frequencies would not provide the necessary **spatial resolution** for diagnostic imaging and lack the characteristics needed for medical ultrasound. *5000 Hz* - At 5 kHz, this is still within the **audible frequency range**. - These frequencies are far too low for medical ultrasound imaging, which requires **megahertz frequencies** to generate diagnostically useful images with adequate detail. * 20 kHz), are generally **below the diagnostic range** for most clinical applications. - Although lower frequencies offer better tissue penetration, frequencies below 2 MHz provide **insufficient spatial resolution** for standard diagnostic medical imaging.

Q: What is an X-ray artifact?

An unwanted image distortion that doesn't represent actual anatomy. ***An unwanted image distortion that doesn't represent actual anatomy*** - An **X-ray artifact** is any feature or distortion on a radiographic image that is not present in the actual object being imaged. - These can arise from various sources such as patient movement, equipment malfunction, or improper technique, leading to **misinterpretation** of the image. - Artifacts are unwanted findings that can obscure true pathology or mimic disease. *A normal anatomical structure visible on X-ray* - This describes a **true anatomical finding**, which is the intended purpose of an X-ray. - Normal anatomical structures are expected and assist in diagnosis, unlike artifacts which obscure or mimic pathology. *An image distortion produced when the patient moves during the X-ray procedure* - While **patient motion** is a common cause of X-ray artifacts, this describes just one specific type (motion artifact), not a comprehensive definition of what an artifact is. - Other sources like metallic objects, scatter radiation, or detector issues can also cause artifacts. *A radiographic finding that indicates disease pathology* - This describes **true pathology** or disease findings, which is what radiologists aim to identify. - Artifacts are the opposite - they are false findings that do not represent actual anatomy or pathology.

Q: The Doppler effect in medical ultrasound is caused by:

Change in frequency of sound. ***Change in frequency of sound*** - The **Doppler effect** in medical ultrasound is fundamentally based on **frequency changes** that occur when sound waves reflect off moving structures like blood cells or tissues. - When ultrasound waves encounter moving objects, the frequency of reflected waves **shifts upward** (if moving toward transducer) or **shifts downward** (if moving away), enabling detection and measurement of blood flow and tissue movement. *Change in direction of sound* - While sound waves do change direction through **reflection** at tissue interfaces, this directional change doesn't explain the **frequency shift** characteristic of the Doppler effect. - Direction changes are related to **acoustic impedance** differences between tissues, not the motion-dependent frequency variations used in Doppler imaging. *Change in amplitude of sound* - Changes in **amplitude** relate to the **intensity** or strength of the sound waves, affected by factors like **attenuation** and **scattering**. - Amplitude variations don't create the **frequency shift** that allows Doppler ultrasound to detect moving structures and measure velocities. *None of the options* - This is incorrect because **frequency change** is indeed the correct mechanism underlying the Doppler effect in medical ultrasound. - The frequency shift phenomenon is what enables **color Doppler**, **pulsed-wave Doppler**, and **continuous-wave Doppler** imaging techniques to function.

Question 1

What is the definition of conscious sedation?

Accepted Answer

Sedation with ability to respond to verbal commands

Answer

CNS depression with unconsciousness

Answer

Sedation with inability to respond to verbal commands

Answer

None of the options

Question 2

Drug of choice for Bier's block ?

Accepted Answer

Lidocaine

Answer

Bupivacaine

Answer

Etidocaine

Answer

Ropivacaine

Question 3

The best local anesthetic for prolonged ophthalmic surgery requiring extended post-operative analgesia is:

Accepted Answer

Bupivacaine

Answer

Tetracaine

Answer

Procaine

Answer

Prilocaine

Question 4

Which anesthetic agent is known for providing smooth induction?

Accepted Answer

Isoflurane

Answer

Halothane

Answer

Enflurane

Answer

Sevoflurane

Question 5

Percentage of adrenaline with lignocaine for local infiltration is?

Accepted Answer

1:50000

Answer

1:1000

Answer

1:10000

Answer

1:200000

Question 6

Which imaging modality delivers the highest dose of radiation?

Accepted Answer

Cardiac perfusion scan

Answer

CT scan of the chest

Answer

Mammogram

Answer

CT scan of the brain

Question 7

Gyromagnetic property of proton is seen in -

Accepted Answer

MRI

Answer

CT

Answer

PET scan

Answer

USG

Question 8

Frequency of ultrasound waves in USG -

Accepted Answer

>2 MHz

Answer

2000 Hz

Answer

5000 Hz

Answer

< 2 MHz

Question 9

What is an X-ray artifact?

Accepted Answer

An unwanted image distortion that doesn't represent actual anatomy

Answer

A radiographic finding that indicates disease pathology

Answer

A normal anatomical structure visible on X-ray

Answer

An image distortion produced when the patient moves during the X-ray procedure

Question 10

The Doppler effect in medical ultrasound is caused by:

Accepted Answer

Change in frequency of sound

Answer

Change in direction of sound

Answer

Change in amplitude of sound

Answer

None of the options

NEET-PG 2013

Anesthesiology

Dental

Radiology