Factors Affecting Sterilization — MCQs
Glass vessels and syringes are best sterilised by -
Which is false regarding Spaulding's criteria?
The quality control agent for sterilization in an autoclave is:
Which of the following is not a sporicidal agent?
All of the sterilization methods are properly matched except?
Which bacteria can grow even in the presence of antiseptics?
Which spores are used to test the efficacy of moist heat sterilization?
What is the preferred method for sterilizing disposable syringes?
Which of the following agents is both a disinfectant and an antiseptic?
Which item cannot be effectively sterilized using a hot air oven?
Factors Affecting Sterilization Indian Medical PG Practice Questions and MCQs
Question 1: Glass vessels and syringes are best sterilised by -
- A. Dry heat sterilization in a hot air oven (Correct Answer)
- B. Steam sterilization in an autoclave
- C. Ethylene oxide sterilization
- D. Radiation sterilization
Explanation: **Dry heat sterilization in a hot air oven** - **Dry heat sterilization** (160-180°C for 1-2 hours) is the **traditional and preferred method** for **glassware and glass syringes**. - **Hot air ovens** achieve sterilization by oxidative destruction and protein denaturation, leaving items completely **dry** and free from moisture. - **Advantages**: No corrosion, no rusting, items remain dry, ideal for **powders, oils, and glassware** that can withstand high temperatures. - **Note**: This question refers to **glass syringes** (historically used, now largely replaced by disposable plastic syringes which are pre-sterilized by radiation). *Steam sterilization in an autoclave* - **Autoclaving** uses **moist heat** (121°C at 15 psi for 15 minutes) and is highly effective for most medical instruments. - **Disadvantage for glassware**: Rapid temperature changes and steam exposure can cause **thermal shock, cracking, or etching** of delicate glassware. - Items emerge **wet** and require drying, which is undesirable for certain laboratory applications. - **Modern context**: Standard method for surgical instruments and heat-stable plastics. *Ethylene oxide sterilization* - **Ethylene oxide (ETO)** is a **low-temperature chemical sterilization** method (50-60°C) for heat-sensitive items. - Used for plastics, rubber, electronics, and endoscopes that cannot tolerate heat. - Requires **long exposure** (12-24 hours) and **aeration period** (up to 7 days) to remove toxic residues. - **Not preferred** for routine glassware sterilization when heat methods are suitable. *Radiation sterilization* - **Gamma radiation or electron beam** sterilization is used for **pre-packaged disposable medical devices**, pharmaceuticals, and plastic syringes. - Highly effective but **expensive** and requires specialized facilities. - Not practical for **routine laboratory glassware** sterilization in clinical or research settings.
Question 2: Which is false regarding Spaulding's criteria?
- A. Non critical items require only decontamination
- B. Cardiac catheters are examples of critical items
- C. Semi critical items need low level disinfection (Correct Answer)
- D. Semi critical items are those which come in contact with mucous membrane or non intact skin
Explanation: ***Semi critical items need low level disinfection*** - This statement is **FALSE** and is the **correct answer** to this question. - **Semi-critical items** require **high-level disinfection**, NOT low-level disinfection. - Semi-critical items come into contact with mucous membranes or non-intact skin and require removal of all vegetative bacteria, fungi, mycobacteria, and most viruses. - Examples include endoscopes, laryngoscope blades, and respiratory therapy equipment. *Non critical items require only decontamination* - This statement is **TRUE** (or at least acceptable in context). - Non-critical items contact intact skin and require **cleaning** and **low-level disinfection** (which falls under the umbrella term "decontamination"). - Examples include blood pressure cuffs, stethoscopes, and bedpans. *Cardiac catheters are examples of critical items* - This statement is **TRUE**. - **Cardiac catheters** enter the **vascular system** (sterile tissue), making them **critical items**. - Critical items require **sterilization** to prevent severe systemic infection. *Semi critical items are those which come in contact with mucous membrane or non intact skin* - This statement is **TRUE** and correctly defines **semi-critical items** according to Spaulding's classification. - This is the standard definition used in medical device processing protocols.
Question 3: The quality control agent for sterilization in an autoclave is:
- A. Bacillus globigii
- B. Bacillus subtilis
- C. Bacillus pumilus
- D. Bacillus stearothermophilus (Correct Answer)
Explanation: ***Bacillus stearothermophilus*** - **_Bacillus stearothermophilus_** spores are used as **biological indicators** for **autoclave sterilization** (moist heat) due to their high resistance to heat. - Their destruction indicates that the sterilization cycle has been effective in achieving sterility. *Bacillus subtilis* - **_Bacillus subtilis_** spores are typically used as biological indicators for **ethylene oxide sterilization**, not autoclaving. - While robust, they are not the standard indicator for **moist heat sterilization** due to their lower resistance compared to _B. stearothermophilus_. *Bacillus pumilus* - **_Bacillus pumilus_** spores are used as biological indicators primarily for **radiation sterilization** processes. - They are not the standard **biological indicator** for **autoclave efficacy**. *Bacillus globigii* - **_Bacillus globigii_** (now known as _Bacillus atrophaeus_) spores are used as biological indicators for **dry heat sterilization**. - They are not the appropriate indicator for **moist heat sterilization** using an autoclave.
Question 4: Which of the following is not a sporicidal agent?
- A. Formaldehyde
- B. Glutaraldehyde
- C. Ethylene oxide
- D. Isopropyl alcohol (Correct Answer)
Explanation: ***Isopropyl alcohol*** - Isopropyl alcohol is an **antiseptic** and **disinfectant** that works by denaturing proteins and dissolving lipids, but it is not effective against bacterial spores. - Its efficacy against microbes is primarily for **vegetative bacteria**, fungi, and enveloped viruses. *Formaldehyde* - Formaldehyde is a potent **sporicide** that cross-links proteins and nucleic acids, making it effective for high-level disinfection and sterilization. - It is often used in solutions or as a gas for sterilizing heat-sensitive medical equipment. *Glutaraldehyde* - Glutaraldehyde is a **high-level disinfectant** and **sterilant** that works by alkylating protein and nucleic acid components, effectively killing spores. - It's commonly used for sterilizing endoscopic instruments and other heat-sensitive devices. *Ethylene oxide* - Ethylene oxide is a gaseous sterilant that **alkylates proteins** and nucleic acids, making it highly effective against all microorganisms, including spores, bacteria, and viruses. - It is frequently used for sterilizing heat-sensitive and moisture-sensitive medical devices.
Question 5: All of the sterilization methods are properly matched except?
- A. Culture media - Autoclaving
- B. Glassware & syringes - Hot air oven
- C. Catgut suture - Radiation
- D. Bronchoscope - Autoclaving (Correct Answer)
Explanation: ***Bronchoscope - Autoclaving*** - **Autoclaving** uses high temperature and steam, which can damage the delicate heat-sensitive components and lenses of a bronchoscope. - **Bronchoscopes** are typically sterilized using **low-temperature sterilization methods** such as **ethylene oxide**, hydrogen peroxide plasma, or glutaraldehyde. *Catgut suture - Radiation* - **Radiation** (e.g., gamma irradiation) is a suitable and common method for sterilizing **heat-sensitive materials** like catgut sutures, ensuring sterility without compromising material integrity. - This method effectively destroys microorganisms by damaging their DNA. *Culture media - Autoclaving* - **Autoclaving** is the standard and most effective method for sterilizing **culture media**, which requires complete elimination of all microbial forms including spores. - The high heat and pressure achieved in an autoclave denature proteins and destroy microbial structures. *Glassware & syringes - Hot air oven* - A **hot air oven** is appropriate for sterilizing **heat-stable items** like glassware and metal syringes, as it provides dry heat that penetrates well and kills microorganisms by oxidation. - This method is particularly useful for items that can be damaged by moisture or steam.
Question 6: Which bacteria can grow even in the presence of antiseptics?
- A. Staphylococcus
- B. Streptococcus
- C. E. coli
- D. Pseudomonas (Correct Answer)
Explanation: ***Pseudomonas*** - **Pseudomonas aeruginosa** is unique among common bacteria in its ability to not just survive but actually **grow in the presence of antiseptics**. - It can multiply in **quaternary ammonium compounds**, **chlorhexidine solutions**, and even **distilled water** due to minimal nutritional requirements. - Resistance mechanisms include **efflux pumps**, **biofilm formation**, and **low outer membrane permeability** that exclude many antiseptic agents. - This characteristic makes it a notorious cause of **hospital-acquired infections** and contaminant of disinfectant solutions. *Staphylococcus* - While some strains like **MRSA (methicillin-resistant Staphylococcus aureus)** are resistant to many antibiotics, they are generally **susceptible to common antiseptics**. - Standard antiseptics like alcohols, iodophors, and chlorhexidine effectively kill Staphylococcus species. *Streptococcus* - **Streptococcus species** are generally **susceptible to most common antiseptics and disinfectants**. - They are known for causing infections like strep throat and cellulitis but do not exhibit antiseptic resistance. *E. coli* - **Escherichia coli** is typically **susceptible to standard antiseptic agents**. - While some strains can be antibiotic-resistant, their resistance mechanisms do not generally extend to antiseptics, unlike **Pseudomonas**.
Question 7: Which spores are used to test the efficacy of moist heat sterilization?
- A. Bacillus stearothermophilus (Correct Answer)
- B. Clostridium tetani
- C. Bacillus subtilis
- D. Clostridium botulinum
Explanation: ***Bacillus stearothermophilus*** - The spores of **Bacillus stearothermophilus** (now referred to as **Geobacillus stearothermophilus**) are highly resistant to heat. - Due to their heat resistance, they are used as the **standard biological indicator** for monitoring the efficacy of **moist heat sterilization** (autoclaving) processes. - These spores can survive temperatures up to 121°C, making them ideal for testing autoclave effectiveness. *Clostridium tetani* - While **Clostridium tetani** forms highly resistant spores, it is **not used as a biological indicator** for sterilization processes. - This organism is clinically significant as the causative agent of tetanus, not as a sterilization test organism. - Standard biological indicators are specially selected *Bacillus* and *Geobacillus* species with known resistance characteristics. *Bacillus subtilis* - **Bacillus subtilis** (and **Bacillus atrophaeus**) spores are used as biological indicators for **dry heat sterilization** and **ethylene oxide gas sterilization**. - Their spores are **less resistant to moist heat** compared to *Bacillus stearothermophilus*, making them unsuitable for testing autoclaves. - They have different resistance profiles better suited to testing other sterilization methods. *Clostridium botulinum* - **Clostridium botulinum** spores are known for producing a potent neurotoxin and are important in food safety and canning industry sterilization standards. - However, they are **not used as biological indicators** for routine laboratory or hospital sterilization monitoring. - Their primary relevance is in food preservation where their spore destruction is the target endpoint.
Question 8: What is the preferred method for sterilizing disposable syringes?
- A. Gas sterilization (Ethylene oxide) (Correct Answer)
- B. Steam sterilization (Autoclave)
- C. Chemical sterilization (Cidex)
- D. Dry heat sterilization (Hot air oven)
Explanation: ***Steam sterilization (Autoclave)*** - While generally effective, **disposable syringes** are typically **pre-sterilized** by the manufacturer using methods like radiation or ethylene oxide and are not meant for resterilization. - Reusing and resterilizing disposable syringes, even with an autoclave, is **not recommended** due to potential material degradation and safety concerns. *Chemical sterilization (Cidex)* - **Cidex (glutaraldehyde)** is a high-level disinfectant primarily used for **heat-sensitive instruments** that cannot withstand high temperatures, such as endoscopes. - It involves **immersion** and is not suitable for the rapid, high-volume sterilization of plastic disposable syringes due to potential residue and material incompatibility. *Dry heat sterilization (Hot air oven)* - Requires **prolonged exposure** to high temperatures and is suitable for **glassware** and **oil-based substances**. - **Plastic disposable syringes** would melt or degrade at the required temperatures (160-170°C) for effective dry heat sterilization. *Gas sterilization (Ethylene oxide)* - **Ethylene oxide (EtO)** is the **preferred industrial method** for sterilizing heat-sensitive and moisture-sensitive medical devices, including **disposable plastic syringes**, by manufacturers. - It penetrates packaging effectively and sterilizes without damaging plastic, but requires specialized equipment and extensive aeration due to its **toxic and flammable nature**, making it impractical for point-of-use sterilization.
Question 9: Which of the following agents is both a disinfectant and an antiseptic?
- A. Hydrogen peroxide (Correct Answer)
- B. Sodium hypochlorite
- C. Glutaraldehyde
- D. Methylated spirit
Explanation: ***Hydrogen peroxide*** - It is used as a **disinfectant** for surfaces and medical equipment, effectively killing bacteria, viruses, fungi, and spores. - It is also applied as an **antiseptic** for wound cleaning and oral rinses due to its ability to release oxygen, which is toxic to anaerobic bacteria. - H₂O₂ represents the **classic example** of a dual-purpose agent with **balanced use** in both roles. *Sodium hypochlorite* - Primarily used as a **disinfectant** for surfaces and water purification due to its strong oxidizing properties. - While it has antimicrobial properties, it is generally considered too **irritating and corrosive** for direct application to living tissues as an antiseptic. *Glutaraldehyde* - This is a **high-level disinfectant** and sterilant, often used for heat-sensitive medical instruments like endoscopes. - Its high toxicity and irritant nature make it unsuitable for use as an **antiseptic** on living tissues. *Methylated spirit* - Methylated spirit (denatured ethanol) is **predominantly used as an antiseptic** for skin preparation before injections or minor procedures. - While alcohols do have disinfectant properties for surfaces, methylated spirit's **primary clinical role** is skin antisepsis rather than environmental disinfection. - Unlike hydrogen peroxide, it lacks the **balanced dual-purpose application** that makes H₂O₂ the classic textbook example.
Question 10: Which item cannot be effectively sterilized using a hot air oven?
- A. Liquid paraffin
- B. Instruments
- C. Culture media (Correct Answer)
- D. Needles
Explanation: ***Culture media*** - Heat sterilization in a hot air oven would cause **dehydration** and **degradation of nutrients** in most culture media, rendering them unusable for microbial growth. - Many components of culture media, such as **sugars** and **proteins**, are heat-sensitive and will break down at the high temperatures required for sterilization in a hot air oven. *Liquid paraffin* - **Oils** and **greases** can be effectively sterilized by a hot air oven because they are unable to be sterilized by steam due to its inability to penetrate oil-based substances. - The dry heat effectively kills microorganisms by causing **oxidative damage** to cellular components without causing unwanted chemical reactions. *Instruments* - **Surgical instruments** made of metal are ideal for sterilization in a hot air oven as dry heat can penetrate their surfaces and kill microorganisms without causing corrosion common with moist heat. - This method is effective for instruments that can withstand high temperatures and are sensitive to moisture. *Needles* - **Metal needles** can be safely sterilized in a hot air oven, as it effectively destroys all microbial life including spores, and prevents **rusting** or **dulling** often caused by steam sterilization. - The dry heat ensures that instruments remain sharp and undamaged after sterilization.
Want unlimited practice?
Get full access to all questions, explanations, and performance tracking.
Start For Free