Viral and plasmid gene strategies (molecular view)

Viral and plasmid gene strategies (molecular view)

Published September 28, 2026

Viral and plasmid gene strategies (molecular view)

On this page

Quick Overview

  • Viral gene expression is predicted from genome polarity, capsid-delivered enzymes, and integration.
  • Lytic infection favors rapid progeny and host destruction; lysogenic/latent and plasmid strategies favor persistence, regulated expression, or inheritance.

Core Facts & Concepts

  • Genome polarity first; RdRp = RNA-dependent RNA polymerase; RT = reverse transcriptase:
GenomeFirst usable messageRequired machinery
+ssRNA (nonretroviral)Genome acts as mRNA; ribosomes translate RdRpViral RdRp copies RNA
-ssRNACannot translate directly; make +mRNACapsid-packaged viral RdRp
dsRNATranscribe +mRNA firstCapsid-packaged viral RdRp
Retroviral +RNAGenome can be translated; packaged RT makes dsDNAIntegrase creates a provirus; host RNA polymerase II transcribes it
  • DNA viruses: host RNA polymerase usually transcribes; host or viral DNA polymerase replicates. Capsids deliver genomes plus any required viral enzyme.
  • Lytic: amplify genome, assemble, lyse. Lysogenic/latent: integrate as prophage/provirus or persist episomally, restrict expression, and reactivate when induced.
  • 📊 Plasmid vector: origin of replication (ori) sets host compatibility and copy number in bacteria: low-copy 1-5, high-copy 50-500 copies/cell. A selectable marker maintains it under selection; insert = payload; oriT/tra = conjugative transfer.

Problem-Solving Approach

  • Apply this sequence:
  1. Classify polarity and ask whether the genome can be mRNA; for retroviruses, also trace RT to stable expression.
  2. For RNA genomes, confirm capsid-packaged RdRp: absent means no immediate viral mRNA; present permits entry transcription.
  3. Map polymerases: RNA replication uses viral RdRp; provirus transcription uses host RNA polymerase II; DNA replication uses host or viral DNA polymerase.
  4. For a vector, check compatible ori, selectable marker, promoter/insert orientation, and oriT/tra or another delivery route.
  5. Predict fate: bacterial plasmid = episomal; nonintegrating mammalian vector = transient and diluted; integrating vector = stable but insertional risk.

⚠️ Warning: No compatible ori, selectable marker, or promoter predicts loss or silence; no transfer element predicts nontransferability.

Analysis Framework & Visual Aid

StrategyLocation and polymeraseResult
Lytic virusViral genome; viral or host polymeraseHigh expression, progeny, lysis
Lysogenic/latentProphage/provirus or episome; host polymerasePersistence; inducible reactivation
Episomal plasmidSeparate DNA; host machineryCompatible ori and selection required; dilution
Integrating vectorHost chromosome; host polymeraseStable expression; insertional risk
  • Decision rule: Direct translation implies +ssRNA; absent packaged polymerase blocks viral mRNA synthesis.
  • Visual aid:
Loading diagram…

Key Points Summary

  • 🎯 +ssRNA is immediately readable; -ssRNA and dsRNA need packaged RdRp.
  • Retroviruses use RT then integrase to form a provirus; host RNA polymerase II transcribes it.
  • Lytic equals rapid replication and lysis; lysogenic/latent equals persistence plus reactivation.
  • Plasmid ori controls compatibility and copy number: low 1-5, high 50-500 copies/cell.
  • A selectable marker maintains a plasmid; oriT/tra supports conjugation; insert plus promoter controls expression.
  • Nonintegrating vectors are usually transient; integrating vectors are stable but risk insertional mutagenesis.

📌 Remember: Polarity predicts first enzyme - Positive translates; negative and double-stranded recruit RdRp.

⭐ Clinical Pearl: Latency is persistence, not eradication; reactivation can follow immune-control loss.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: Viral and plasmid gene strategies (molecular view)

  1. 1. A viral genome immediately directs protein synthesis in cytoplasm despite blocked host DNA transcription. Which genome type is most consistent? Double-stranded DNA Positive-sense single-stranded RNA Negative-sense single-stranded RNA Double-stranded RNA

    • A. Double-stranded RNA
    • B. Double-stranded DNA
    • C. Positive-sense single-stranded RNA
    • D. Negative-sense single-stranded RNA
    Show answer

    Answer: C. Positive-sense single-stranded RNA

    Positive-sense single-stranded RNA - Positive-sense single-stranded RNA can function directly as mRNA, allowing host ribosomes to translate it immediately in the cytoplasm. - This genome type bypasses host DNA transcription, matching the condition that protein synthesis proceeds despite blocked transcription. Double-stranded RNA - Double-stranded RNA cannot generally serve directly as mRNA for host ribosomes; the virus must first use a polymerase to produce translatable positive-sense RNA. - The need for viral polymerase activity makes this less consistent with a genome that immediately directs protein synthesis in the cytoplasm. Double-stranded DNA - Double-stranded DNA must be transcribed into RNA before its information can be translated into protein. - Because host DNA transcription is blocked, this genome type cannot immediately direct cytoplasmic protein synthesis. Negative-sense single-stranded RNA - Negative-sense single-stranded RNA is complementary to mRNA and cannot be translated directly by host ribosomes. - A viral RNA-dependent RNA polymerase must first copy it into positive-sense RNA, so translation is not immediate.

  2. 2. Cell-free lysate from resistant bacteria transfers resistance to susceptible bacteria. DNase eliminates transfer, whereas protease does not. Which route is best supported? Conjugation through direct contact with resistant donor cells Transformation by uptake of extracellular bacterial DNA Transduction by DNA enclosed within bacteriophage particles Binary fission of resistant bacteria remaining in the lysate

    • A. Transduction by DNA enclosed within bacteriophage particles
    • B. Binary fission of resistant bacteria remaining in the lysate
    • C. Conjugation through direct contact with resistant donor cells
    • D. Transformation by uptake of extracellular bacterial DNA
    Show answer

    Answer: D. Transformation by uptake of extracellular bacterial DNA

    Transformation by uptake of extracellular bacterial DNA - Transformation is supported because susceptible cells acquired a heritable trait from cell-free material, and DNase destroyed the transfer activity. - The DNase result identifies exposed extracellular DNA as the active material, while protease resistance argues against a protein-based transfer agent. Transduction by DNA enclosed within bacteriophage particles - Transduction involves bacteriophage-enclosed DNA, which would be relatively protected from extracellular DNase treatment. - Because DNase eliminated transfer, the active genetic material was likely exposed extracellular DNA, not DNA shielded within phage particles. Binary fission of resistant bacteria remaining in the lysate - Binary fission requires intact, living resistant bacteria, but the experimental material was a cell-free lysate. - Although bacterial replication can increase cell number, it cannot explain transfer from cell-free material to susceptible recipients. Conjugation through direct contact with resistant donor cells - Conjugation requires direct contact between susceptible recipients and living resistant donor cells. - A cell-free lysate lacks the intact donor cells needed to form a conjugative connection and transfer DNA.

  3. 3. For a two-substrate enzyme, reciprocal plots varying substrate A at several fixed concentrations of substrate B intersect. Which catalytic model is best supported? A ping-pong model in which product forms before substrate B binds A sequential model containing an enzyme–A–B ternary complex A model in which A and B undergo independent one-substrate reactions A model in which substrate B binds only after both products dissociate

    • A. A ping-pong model in which product forms before substrate B binds
    • B. A model in which A and B undergo independent one-substrate reactions
    • C. A sequential model containing an enzyme–A–B ternary complex
    • D. A model in which substrate B binds only after both products dissociate
    Show answer

    Answer: C. A sequential model containing an enzyme–A–B ternary complex

    A sequential model containing an enzyme–A–B ternary complex - Intersecting reciprocal lines support simultaneous association of both substrates with the enzyme in an enzyme–A–B ternary complex. - This sequential mechanism allows substrate B to bind before product formation is complete, producing kinetic behavior in which fixed substrate B concentrations alter the apparent kinetics for A. A ping-pong model in which product forms before substrate B binds - A classical ping-pong mechanism releases one product before substrate B binds, preventing simultaneous association of both substrates with the enzyme. - Ping-pong mechanisms generally produce parallel reciprocal lines, rather than the intersecting lines observed when varying substrate A at fixed substrate B concentrations. A model in which A and B undergo independent one-substrate reactions - Independent one-substrate reactions would not produce the observed dependence of substrate A kinetics on the fixed concentration of substrate B. - The intersecting reciprocal lines indicate interaction between the substrates’ catalytic behavior, inconsistent with treating A and B as entirely independent reactions. A model in which substrate B binds only after both products dissociate - Requiring substrate B to bind only after both products dissociate excludes simultaneous substrate binding, which is supported by the intersecting reciprocal lines. - This model therefore does not account for the observed ternary-complex kinetics, unlike a sequential mechanism involving enzyme, A, and B together.

  4. 4. Bisulfite converts unmethylated cytosine to thymine in sequencing reads but leaves methylated cytosine unchanged. Promoter reads contain more cytosines in low-expression cells than in high-expression cells. What is supported? Promoter methylation is associated with lower gene expression Promoter methylation is associated with faster transcription Coding-region methylation causes accelerated mRNA degradation Low expression demonstrates mutation of the promoter sequence

    • A. Promoter methylation is associated with faster transcription
    • B. Coding-region methylation causes accelerated mRNA degradation
    • C. Promoter methylation is associated with lower gene expression
    • D. Low expression demonstrates mutation of the promoter sequence
    Show answer

    Answer: C. Promoter methylation is associated with lower gene expression

    Promoter methylation is associated with lower gene expression - Because methylated cytosines remain unchanged during bisulfite treatment, retained cytosines indicate greater promoter methylation in low-expression cells. - The results support an association between promoter methylation and lower gene expression, but do not alone establish causation. Promoter methylation is associated with faster transcription - Greater numbers of retained cytosines indicate greater promoter methylation in the low-expression cells. - This finding is associated with lower expression, not faster transcription; the data do not support the proposed direction. Coding-region methylation causes accelerated mRNA degradation - The assay examined promoter methylation, not methylation within the coding region. - The experiment did not measure mRNA degradation, so it cannot support accelerated degradation as the explanation. Low expression demonstrates mutation of the promoter sequence - Bisulfite-dependent cytosine retention reflects methylation status, not necessarily a change in the DNA sequence. - Low expression therefore does not demonstrate a promoter mutation; the experiment did not establish sequence alteration.

  5. 5. At saturating substrate concentration, 2 nmol of an enzyme produces product at 6 μmol/min. What is the enzyme's approximate turnover number? 3 s⁻¹ 50 s⁻¹ 3,000 s⁻¹ 180,000 s⁻¹

    • A. 50 s⁻¹
    • B. 3 s⁻¹
    • C. 180,000 s⁻¹
    • D. 3,000 s⁻¹
    Show answer

    Answer: A. 50 s⁻¹

    50 s⁻¹ - At saturating substrate concentration, reaction rate equals Vmax, so kcat = Vmax/[enzyme] = 6 μmol/min ÷ 2 nmol = 3,000 min⁻¹. - Converting minutes to seconds gives 3,000 min⁻¹ ÷ 60 = 50 s⁻¹, representing the enzyme's product molecules generated per active site per second. 3 s⁻¹ - This value results from dividing the numerical coefficients, 6 ÷ 2, while ignoring the μmol-to-nmol conversion; one micromole equals 1,000 nanomoles. - Accounting for the concentration units gives 3,000 min⁻¹, and proper time conversion yields 50 s⁻¹ rather than 3 s⁻¹. 180,000 s⁻¹ - The value 3,000 is the calculated turnover rate in per minute units, not per second: 6 μmol/min ÷ 2 nmol = 3,000 min⁻¹. - Because one minute contains 60 seconds, the per-minute rate must be divided by 60, producing 50 s⁻¹ rather than 180,000 s⁻¹. 3,000 s⁻¹ - The correct intermediate value is 3,000 min⁻¹, obtained after converting micromoles to nanomoles; it is not yet expressed in seconds. - Converting minutes to seconds requires dividing by 60, not multiplying: 3,000 min⁻¹ ÷ 60 = 50 s⁻¹, so 180,000 s⁻¹ is incorrect.

  6. 6. Equal amounts of wild-type and variant enzyme have the same Vmax and half-maximal substrate concentration, but only the wild type displays a sigmoidal substrate-response curve. What did the substitution most likely alter? It disrupted positive cooperativity while preserving maximal catalytic capacity. It decreased substrate affinity while preserving positive cooperativity. It reduced maximal catalytic capacity while increasing positive cooperativity. It lowered enzyme abundance while preserving the substrate-response shape.

    • A. It lowered enzyme abundance while preserving the substrate-response shape.
    • B. It disrupted positive cooperativity while preserving maximal catalytic capacity.
    • C. It decreased substrate affinity while preserving positive cooperativity.
    • D. It reduced maximal catalytic capacity while increasing positive cooperativity.
    Show answer

    Answer: B. It disrupted positive cooperativity while preserving maximal catalytic capacity.

    It disrupted positive cooperativity while preserving maximal catalytic capacity. - A sigmoidal curve reflects positive cooperativity; its loss indicates disrupted cooperative communication between enzyme sites. - Unchanged Vmax shows that maximal catalytic capacity was preserved despite the altered response shape. It lowered enzyme abundance while preserving the substrate-response shape. - Equal enzyme amounts were tested, so reduced abundance does not explain the difference in response curves. - The variant changed from sigmoidal to hyperbolic behavior, indicating altered cooperativity rather than preserved substrate-response shape. It decreased substrate affinity while preserving positive cooperativity. - The unchanged half-maximal substrate concentration does not support decreased substrate affinity. - The variant lacks positive cooperativity, so this choice incorrectly claims that cooperative behavior was preserved. It reduced maximal catalytic capacity while increasing positive cooperativity. - Identical Vmax values indicate that maximal catalytic capacity was not reduced. - The variant shows less cooperativity, changing to a hyperbolic curve rather than becoming more positively cooperative.

  7. 7. Glycogen phosphorylase stops near branch points. Adding a purified debranching enzyme restores glucose-1-phosphate release. Which linkage must the added activity resolve? Terminal α-1,4 glycosidic linkages Branch-point α-1,6 glycosidic linkages Backbone β-1,4 glycosidic linkages Sugar-phosphate phosphodiester linkages

    • A. Sugar-phosphate phosphodiester linkages
    • B. Backbone β-1,4 glycosidic linkages
    • C. Branch-point α-1,6 glycosidic linkages
    • D. Terminal α-1,4 glycosidic linkages
    Show answer

    Answer: C. Branch-point α-1,6 glycosidic linkages

    Branch-point α-1,6 glycosidic linkages - Glycogen branches contain α-1,6 glycosidic linkages, which create the obstruction near the branch point. - Debranching activity resolves the α-1,6 linkage, allowing phosphorylase to resume cleaving nearby α-1,4-linked chains and release glucose-1-phosphate. Sugar-phosphate phosphodiester linkages - Phosphodiester linkages are characteristic of nucleic acid backbones, not glycogen’s carbohydrate structure. - This choice does not fit because glycogen degradation involves glycosidic bonds, rather than sugar-phosphate bonds. Backbone β-1,4 glycosidic linkages - Glycogen does not contain a β-1,4-linked backbone; its linear chains use α-1,4 glycosidic linkages. - Therefore, this linkage cannot explain why phosphorylase stops near glycogen branch points. Terminal α-1,4 glycosidic linkages - Glycogen phosphorylase already cleaves α-1,4 linkages from nonreducing ends until it approaches a branch. - Thus, terminal α-1,4 bonds do not account for the enzyme’s branch-point limitation.

  8. 8. A DNA-binding protein has a Kd of 2 nM for untreated DNA and 20 nM after terminal phosphates are removed; replacing the terminal A–T pair with G–C has no effect. Which interaction is supported? Intercalation between internal base pairs Electrostatic contact with a terminal phosphate Hydrogen bonding to the terminal A–T pair Hydrophobic contact enhanced by the terminal G–C pair

    • A. Hydrogen bonding to the terminal A–T pair
    • B. Hydrophobic contact enhanced by the terminal G–C pair
    • C. Electrostatic contact with a terminal phosphate
    • D. Intercalation between internal base pairs
    Show answer

    Answer: C. Electrostatic contact with a terminal phosphate

    Electrostatic contact with a terminal phosphate - Removing terminal phosphates increases Kd from 2 nM to 20 nM, indicating weaker binding and dependence on the terminal phosphate. - This tenfold affinity loss supports an electrostatic interaction between the DNA-binding protein and a terminal phosphate. Hydrogen bonding to the terminal A–T pair - The unchanged affinity after replacing terminal A–T with G–C argues against hydrogen bonding that specifically recognizes the terminal A–T pair. - A hydrogen-bonding interaction with that base pair should alter binding when its base identity changes, but the measured Kd remains unaffected. Hydrophobic contact enhanced by the terminal G–C pair - The sequence substitution provides no evidence that a terminal G–C pair enhances hydrophobic contact, because it leaves affinity unchanged. - The tenfold Kd increase follows phosphate removal, not base-pair replacement, identifying the phosphate as the relevant interaction site. Intercalation between internal base pairs - Intercalation between internal base pairs would not be specifically supported by the effect of removing terminal phosphates. - The experiment identifies sensitivity to a terminal phosphate, while the provided results offer no evidence for insertion between internal base pairs.

  9. 9. A protonophore increases inner mitochondrial membrane proton permeability. With oxygen and substrates available, which immediate pattern is expected? Decreased oxygen consumption and increased ATP production Increased oxygen consumption and decreased ATP production Increased oxygen consumption and increased ATP production Decreased oxygen consumption and decreased ATP production

    • A. Decreased oxygen consumption and increased ATP production
    • B. Decreased oxygen consumption and decreased ATP production
    • C. Increased oxygen consumption and decreased ATP production
    • D. Increased oxygen consumption and increased ATP production
    Show answer

    Answer: C. Increased oxygen consumption and decreased ATP production

    Increased oxygen consumption and decreased ATP production - Proton leakage collapses the electrochemical gradient required by ATP synthase, directly decreasing mitochondrial ATP production. - Reduced backpressure on the respiratory chain accelerates electron transport and increases oxygen consumption while substrates remain available. Decreased oxygen consumption and increased ATP production - A protonophore dissipates the proton gradient, so ATP synthase has less driving force and cannot increase ATP production. - With substrates and oxygen available, uncoupling generally accelerates electron transport and oxygen consumption rather than decreasing respiratory activity. Decreased oxygen consumption and decreased ATP production - Although proton leakage can reduce ATP production, it does not usually decrease oxygen consumption when electron donors and oxygen remain available. - The loss of coupling stimulates respiratory electron flow, making decreased oxygen consumption inconsistent with the immediate uncoupling response. Increased oxygen consumption and increased ATP production - Uncoupling can increase oxygen consumption by accelerating electron transport, but the dissipated proton gradient prevents efficient ATP synthesis. - Therefore, increased ATP production does not accompany the elevated respiratory rate; ATP generation decreases despite greater oxygen use.

  10. 10. A splice-site mutation increases an RT-PCR product from 400 to 550 base pairs without changing total transcript abundance. Which molecular event best explains the result? Skipping of a 150-base-pair exon Activation of transcription at the original promoter Shortening of the transcript's poly(A) tail Retention of a 150-base-pair intron

    • A. Shortening of the transcript's poly(A) tail
    • B. Retention of a 150-base-pair intron
    • C. Skipping of a 150-base-pair exon
    • D. Activation of transcription at the original promoter
    Show answer

    Answer: B. Retention of a 150-base-pair intron

    Retention of a 150-base-pair intron - Intron retention adds the 150-base-pair intron to the mature transcript, increasing the cDNA-derived RT-PCR product from 400 to 550 base pairs. - Because total transcript abundance is unchanged, the splice-site mutation most directly affects transcript processing, not transcription initiation or overall transcript production. Shortening of the transcript's poly(A) tail - Poly(A)-tail shortening does not alter the internal transcript sequence amplified by primers, so it would not increase the RT-PCR product from 400 to 550 base pairs. - The observed size change reflects additional retained sequence, whereas poly(A)-tail length is not represented in this internal amplified region. Skipping of a 150-base-pair exon - Exon skipping would remove 150 base pairs from the transcript, producing a 250-base-pair product rather than increasing the product to 550 base pairs. - Although splice-site mutations can cause exon skipping, this choice predicts loss of sequence, contrary to the observed 150-base-pair increase. Activation of transcription at the original promoter - Promoter activation could increase transcript abundance, but it would not add 150 base pairs to the region between internal RT-PCR primers. - The unchanged transcript abundance argues against altered transcription initiation as the explanation for the larger amplified product.

Flashcards: Viral and plasmid gene strategies (molecular view)

  1. 1. A _____-sense RNA genome can serve directly as mRNA; in retroviruses, it is reverse-transcribed into DNA.

    Show answer

    positive

  2. 2. _____ adds nucleotides to the growing strand during DNA replication

    Show answer

    DNA polymerase

  3. 3. Prokaryotes have _____ origin(s) of replication and eukaryotes have _____ origin(s) of replication

    Show answer

    1 · multiple

  4. 4. The 5' cap on mRNA is made up of _____ The poly-A tail is made up of _____

    Show answer

    7-methylguanosine · adenine nucleotides

  5. 5. DNA polymerase reads the template strand from _____ → _____ and synthesize the new strand from _____ → _____

    Show answer

    3' · 5’ · 5’ · 3’

  6. 6. A _____ sense RNA strand has a nucleotide sequence complementary to the mRNA that it encodes

    Show answer

    negative

  7. 7. In eukaryotic translation, the 40S ribosome subunit attaches to the _____ and scans for a start codon;

    Show answer

    5’ cap

  8. 8. The three steps in translation are: _____ _____ _____

    Show answer

    Initiation · Elongation · Termination

  9. 9. An operon _____ is a short region of DNA that lies partially within the promoter and interacts with a repressor that controls the transcription of the operon

    Show answer

    operator

  10. 10. A repressible operon under normal conditions will _____

    Show answer

    proceed with transcription

Everything you need for MCAT prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF