DNA replication and repair

DNA replication and repair

Published September 28, 2026

DNA replication and repair

On this page

Quick Overview

  • DNA replication is semiconservative, bidirectional, and antiparallel: each daughter duplex has one parental strand; synthesis is only 5′→3′.
  • Fork order predicts enzyme function; lesion geometry selects repair and explains genome-instability disease.

Core Facts & Concepts

  • Fork map: origin → helicase unwinds; topoisomerase relieves torsional strain and supercoils; SSB (bacteria) or RPA (eukaryotes) stabilizes ssDNA; primase makes RNA primers; polymerase plus sliding clamp extends.
    • Leading strand is continuous; lagging strand forms Okazaki fragments (~1,000-2,000 nt in bacteria; ~100-200 nt in eukaryotes). Primer removal, gap filling, and ligase sealing finish the backbone.
  • Bacteria vs eukaryotes: bacteria usually have one circular oriC (DnaA), Pol III replicase, and Pol I primer removal. Eukaryotes have multiple linear-chromosome origins licensed once per cell cycle (ORC/MCM); Pol α-primase initiates, Pol ε leads, and Pol δ lags. Clamps: beta clamp versus PCNA.
  • Ends: bacteria lack telomeres; eukaryotic telomeres solve end replication. Telomerase extends the 3′ telomere using an RNA template and reverse-transcriptase activity; it is active in germline, stem, and most cancer cells but low in most somatic cells.
  • Proofreading is a 3′→5′ exonuclease; MMR catches residual errors.

Problem-Solving Approach

  • 1. Check direction: polymerase needs a template and free 3′-OH; repair fill-in also proceeds 5′→3′. No primer, no synthesis.
  • 2. Classify the lesion:
    • Replication mismatch or small insertion-deletion → MMR; excise the new strand, resynthesize, ligate.
    • One oxidized, deaminated, alkylated, or missing base → BER (glycosylase, AP endonuclease, polymerase, ligase).
    • Bulky helix distortion, UV dimer, or chemical adduct → NER; dual incision and resynthesis.
    • Double-strand break → HR with a sister chromatid in S/G2, or NHEJ without a template; NHEJ is error-prone.
  • 3. Predict defects: MMR loss suggests Lynch syndrome; NER loss suggests xeroderma pigmentosum; BRCA1/2 loss impairs HR.

⭐ Clinical Pearl: Extreme UV sensitivity plus early skin cancers localizes the defect to NER.

⚠️ Warning: Do not assign BER to bulky distortion or HR when no homologous template exists.

Analysis Framework & Visual Aid

FindingPathwayDecisive feature
Replication mismatchMMRNew-strand correction
Small base lesion or AP siteBERMinimal helix distortion
Bulky dimer or adductNERDual incision around lesion
DSB with sister chromatidHRTemplate-guided, high fidelity
DSB without templateNHEJDirect joining; indels possible
Loading diagram…

📌 Remember: Mismatch, Base, Bulge, Break - MMR, BER, NER, HR or NHEJ.

Key Points Summary

  • 5′→3′ only: leading continuous; lagging uses primers and Okazaki fragments.
  • Topoisomerase prevents torsional stress; ligase seals nicks after fill-in.
  • Fragment lengths: bacteria 1,000-2,000 nt; eukaryotes 100-200 nt.
  • MMR = mismatch; BER = small base; NER = bulky; HR/NHEJ = DSB.
  • HR is template-based in S/G2; NHEJ is rapid and error-prone.
  • Telomerase extends linear chromosome ends; defective NER causes UV sensitivity and skin cancer.
  • Pitfall: proofreading is immediate 3′→5′ correction; MMR is post-replication.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: DNA replication and repair

  1. 1. A variant abolishes a restriction site in a 5-kb locus that normally yields 3-kb and 2-kb probe-positive fragments. Which Southern blot lane represents a heterozygote? Lane I Lane II Lane III Lane IV

    • A. Lane III
    • B. Lane IV
    • C. Lane I
    • D. Lane II
    Show answer

    Answer: A. Lane III

    Lane III - Lane III shows the uncut 5-kb fragment from the variant allele, which lacks the restriction site, plus the normal allele’s 3-kb and 2-kb probe-positive fragments. - This combination demonstrates heterozygosity: one allele remains restriction-site-containing and produces 3-kb and 2-kb fragments, while the other remains intact at 5 kb. Lane IV - Lane IV has a 5-kb and 2-kb pattern, which does not include the 3-kb fragment expected from a complete normal allele. - Because the 3-kb product is missing, this lane does not show the predicted combination of one uncut variant allele and one normally cut allele. Lane I - Lane I contains only a 5-kb band, indicating that the locus is uncut on the represented allele rather than carrying both allele patterns. - A heterozygote must also show the normal allele’s 3-kb and 2-kb fragments, which are absent from this lane. Lane II - Lane II shows only the 3-kb and 2-kb fragments, representing an allele that retains the restriction site and is fully cleaved. - A heterozygote should additionally contain the variant allele’s uncut 5-kb fragment, which is absent here.

  2. 2. After one division in light nitrogen, the figure shows intermediate-density native DNA but separate heavy and light bands after strand denaturation. Which replication model fits both results? Conservative replication Dispersive replication Semiconservative replication Rolling-circle replication

    • A. Conservative replication
    • B. Semiconservative replication
    • C. Rolling-circle replication
    • D. Dispersive replication
    Show answer

    Answer: B. Semiconservative replication

    Semiconservative replication - Semiconservative replication gives each daughter duplex one parental heavy strand and one newly synthesized light strand. - Native duplexes are therefore intermediate in density, while denaturation separates the intact heavy and light strands into distinct bands. Conservative replication - Conservative replication preserves the original heavy duplex and creates a separate light duplex after one division. - The native DNA would therefore show separate heavy and light bands before denaturation, unlike the observed intermediate-density band. Rolling-circle replication - Rolling-circle replication does not predict the observed pairing of one intact heavy strand with one intact light strand in each duplex. - This model therefore does not account for both the intermediate native DNA and the separate heavy and light denatured strands. Dispersive replication - Dispersive replication distributes parental heavy and newly synthesized light DNA segments throughout each strand. - After denaturation, the strands would remain intermediate in density, rather than producing separate heavy and light bands.

  3. 3. For a two-substrate enzyme, reciprocal plots varying substrate A at several fixed concentrations of substrate B intersect. Which catalytic model is best supported? A ping-pong model in which product forms before substrate B binds A sequential model containing an enzyme–A–B ternary complex A model in which A and B undergo independent one-substrate reactions A model in which substrate B binds only after both products dissociate

    • A. A ping-pong model in which product forms before substrate B binds
    • B. A model in which A and B undergo independent one-substrate reactions
    • C. A sequential model containing an enzyme–A–B ternary complex
    • D. A model in which substrate B binds only after both products dissociate
    Show answer

    Answer: C. A sequential model containing an enzyme–A–B ternary complex

    A sequential model containing an enzyme–A–B ternary complex - Intersecting reciprocal lines support simultaneous association of both substrates with the enzyme in an enzyme–A–B ternary complex. - This sequential mechanism allows substrate B to bind before product formation is complete, producing kinetic behavior in which fixed substrate B concentrations alter the apparent kinetics for A. A ping-pong model in which product forms before substrate B binds - A classical ping-pong mechanism releases one product before substrate B binds, preventing simultaneous association of both substrates with the enzyme. - Ping-pong mechanisms generally produce parallel reciprocal lines, rather than the intersecting lines observed when varying substrate A at fixed substrate B concentrations. A model in which A and B undergo independent one-substrate reactions - Independent one-substrate reactions would not produce the observed dependence of substrate A kinetics on the fixed concentration of substrate B. - The intersecting reciprocal lines indicate interaction between the substrates’ catalytic behavior, inconsistent with treating A and B as entirely independent reactions. A model in which substrate B binds only after both products dissociate - Requiring substrate B to bind only after both products dissociate excludes simultaneous substrate binding, which is supported by the intersecting reciprocal lines. - This model therefore does not account for the observed ternary-complex kinetics, unlike a sequential mechanism involving enzyme, A, and B together.

  4. 4. Bisulfite converts unmethylated cytosine to thymine in sequencing reads but leaves methylated cytosine unchanged. Promoter reads contain more cytosines in low-expression cells than in high-expression cells. What is supported? Promoter methylation is associated with lower gene expression Promoter methylation is associated with faster transcription Coding-region methylation causes accelerated mRNA degradation Low expression demonstrates mutation of the promoter sequence

    • A. Promoter methylation is associated with faster transcription
    • B. Coding-region methylation causes accelerated mRNA degradation
    • C. Promoter methylation is associated with lower gene expression
    • D. Low expression demonstrates mutation of the promoter sequence
    Show answer

    Answer: C. Promoter methylation is associated with lower gene expression

    Promoter methylation is associated with lower gene expression - Because methylated cytosines remain unchanged during bisulfite treatment, retained cytosines indicate greater promoter methylation in low-expression cells. - The results support an association between promoter methylation and lower gene expression, but do not alone establish causation. Promoter methylation is associated with faster transcription - Greater numbers of retained cytosines indicate greater promoter methylation in the low-expression cells. - This finding is associated with lower expression, not faster transcription; the data do not support the proposed direction. Coding-region methylation causes accelerated mRNA degradation - The assay examined promoter methylation, not methylation within the coding region. - The experiment did not measure mRNA degradation, so it cannot support accelerated degradation as the explanation. Low expression demonstrates mutation of the promoter sequence - Bisulfite-dependent cytosine retention reflects methylation status, not necessarily a change in the DNA sequence. - Low expression therefore does not demonstrate a promoter mutation; the experiment did not establish sequence alteration.

  5. 5. At saturating substrate concentration, 2 nmol of an enzyme produces product at 6 μmol/min. What is the enzyme's approximate turnover number? 3 s⁻¹ 50 s⁻¹ 3,000 s⁻¹ 180,000 s⁻¹

    • A. 50 s⁻¹
    • B. 3 s⁻¹
    • C. 180,000 s⁻¹
    • D. 3,000 s⁻¹
    Show answer

    Answer: A. 50 s⁻¹

    50 s⁻¹ - At saturating substrate concentration, reaction rate equals Vmax, so kcat = Vmax/[enzyme] = 6 μmol/min ÷ 2 nmol = 3,000 min⁻¹. - Converting minutes to seconds gives 3,000 min⁻¹ ÷ 60 = 50 s⁻¹, representing the enzyme's product molecules generated per active site per second. 3 s⁻¹ - This value results from dividing the numerical coefficients, 6 ÷ 2, while ignoring the μmol-to-nmol conversion; one micromole equals 1,000 nanomoles. - Accounting for the concentration units gives 3,000 min⁻¹, and proper time conversion yields 50 s⁻¹ rather than 3 s⁻¹. 180,000 s⁻¹ - The value 3,000 is the calculated turnover rate in per minute units, not per second: 6 μmol/min ÷ 2 nmol = 3,000 min⁻¹. - Because one minute contains 60 seconds, the per-minute rate must be divided by 60, producing 50 s⁻¹ rather than 180,000 s⁻¹. 3,000 s⁻¹ - The correct intermediate value is 3,000 min⁻¹, obtained after converting micromoles to nanomoles; it is not yet expressed in seconds. - Converting minutes to seconds requires dividing by 60, not multiplying: 3,000 min⁻¹ ÷ 60 = 50 s⁻¹, so 180,000 s⁻¹ is incorrect.

  6. 6. Equal amounts of wild-type and variant enzyme have the same Vmax and half-maximal substrate concentration, but only the wild type displays a sigmoidal substrate-response curve. What did the substitution most likely alter? It disrupted positive cooperativity while preserving maximal catalytic capacity. It decreased substrate affinity while preserving positive cooperativity. It reduced maximal catalytic capacity while increasing positive cooperativity. It lowered enzyme abundance while preserving the substrate-response shape.

    • A. It lowered enzyme abundance while preserving the substrate-response shape.
    • B. It disrupted positive cooperativity while preserving maximal catalytic capacity.
    • C. It decreased substrate affinity while preserving positive cooperativity.
    • D. It reduced maximal catalytic capacity while increasing positive cooperativity.
    Show answer

    Answer: B. It disrupted positive cooperativity while preserving maximal catalytic capacity.

    It disrupted positive cooperativity while preserving maximal catalytic capacity. - A sigmoidal curve reflects positive cooperativity; its loss indicates disrupted cooperative communication between enzyme sites. - Unchanged Vmax shows that maximal catalytic capacity was preserved despite the altered response shape. It lowered enzyme abundance while preserving the substrate-response shape. - Equal enzyme amounts were tested, so reduced abundance does not explain the difference in response curves. - The variant changed from sigmoidal to hyperbolic behavior, indicating altered cooperativity rather than preserved substrate-response shape. It decreased substrate affinity while preserving positive cooperativity. - The unchanged half-maximal substrate concentration does not support decreased substrate affinity. - The variant lacks positive cooperativity, so this choice incorrectly claims that cooperative behavior was preserved. It reduced maximal catalytic capacity while increasing positive cooperativity. - Identical Vmax values indicate that maximal catalytic capacity was not reduced. - The variant shows less cooperativity, changing to a hyperbolic curve rather than becoming more positively cooperative.

  7. 7. Glycogen phosphorylase stops near branch points. Adding a purified debranching enzyme restores glucose-1-phosphate release. Which linkage must the added activity resolve? Terminal α-1,4 glycosidic linkages Branch-point α-1,6 glycosidic linkages Backbone β-1,4 glycosidic linkages Sugar-phosphate phosphodiester linkages

    • A. Sugar-phosphate phosphodiester linkages
    • B. Backbone β-1,4 glycosidic linkages
    • C. Branch-point α-1,6 glycosidic linkages
    • D. Terminal α-1,4 glycosidic linkages
    Show answer

    Answer: C. Branch-point α-1,6 glycosidic linkages

    Branch-point α-1,6 glycosidic linkages - Glycogen branches contain α-1,6 glycosidic linkages, which create the obstruction near the branch point. - Debranching activity resolves the α-1,6 linkage, allowing phosphorylase to resume cleaving nearby α-1,4-linked chains and release glucose-1-phosphate. Sugar-phosphate phosphodiester linkages - Phosphodiester linkages are characteristic of nucleic acid backbones, not glycogen’s carbohydrate structure. - This choice does not fit because glycogen degradation involves glycosidic bonds, rather than sugar-phosphate bonds. Backbone β-1,4 glycosidic linkages - Glycogen does not contain a β-1,4-linked backbone; its linear chains use α-1,4 glycosidic linkages. - Therefore, this linkage cannot explain why phosphorylase stops near glycogen branch points. Terminal α-1,4 glycosidic linkages - Glycogen phosphorylase already cleaves α-1,4 linkages from nonreducing ends until it approaches a branch. - Thus, terminal α-1,4 bonds do not account for the enzyme’s branch-point limitation.

  8. 8. A DNA-binding protein has a Kd of 2 nM for untreated DNA and 20 nM after terminal phosphates are removed; replacing the terminal A–T pair with G–C has no effect. Which interaction is supported? Intercalation between internal base pairs Electrostatic contact with a terminal phosphate Hydrogen bonding to the terminal A–T pair Hydrophobic contact enhanced by the terminal G–C pair

    • A. Hydrogen bonding to the terminal A–T pair
    • B. Hydrophobic contact enhanced by the terminal G–C pair
    • C. Electrostatic contact with a terminal phosphate
    • D. Intercalation between internal base pairs
    Show answer

    Answer: C. Electrostatic contact with a terminal phosphate

    Electrostatic contact with a terminal phosphate - Removing terminal phosphates increases Kd from 2 nM to 20 nM, indicating weaker binding and dependence on the terminal phosphate. - This tenfold affinity loss supports an electrostatic interaction between the DNA-binding protein and a terminal phosphate. Hydrogen bonding to the terminal A–T pair - The unchanged affinity after replacing terminal A–T with G–C argues against hydrogen bonding that specifically recognizes the terminal A–T pair. - A hydrogen-bonding interaction with that base pair should alter binding when its base identity changes, but the measured Kd remains unaffected. Hydrophobic contact enhanced by the terminal G–C pair - The sequence substitution provides no evidence that a terminal G–C pair enhances hydrophobic contact, because it leaves affinity unchanged. - The tenfold Kd increase follows phosphate removal, not base-pair replacement, identifying the phosphate as the relevant interaction site. Intercalation between internal base pairs - Intercalation between internal base pairs would not be specifically supported by the effect of removing terminal phosphates. - The experiment identifies sensitivity to a terminal phosphate, while the provided results offer no evidence for insertion between internal base pairs.

  9. 9. A protonophore increases inner mitochondrial membrane proton permeability. With oxygen and substrates available, which immediate pattern is expected? Decreased oxygen consumption and increased ATP production Increased oxygen consumption and decreased ATP production Increased oxygen consumption and increased ATP production Decreased oxygen consumption and decreased ATP production

    • A. Decreased oxygen consumption and increased ATP production
    • B. Decreased oxygen consumption and decreased ATP production
    • C. Increased oxygen consumption and decreased ATP production
    • D. Increased oxygen consumption and increased ATP production
    Show answer

    Answer: C. Increased oxygen consumption and decreased ATP production

    Increased oxygen consumption and decreased ATP production - Proton leakage collapses the electrochemical gradient required by ATP synthase, directly decreasing mitochondrial ATP production. - Reduced backpressure on the respiratory chain accelerates electron transport and increases oxygen consumption while substrates remain available. Decreased oxygen consumption and increased ATP production - A protonophore dissipates the proton gradient, so ATP synthase has less driving force and cannot increase ATP production. - With substrates and oxygen available, uncoupling generally accelerates electron transport and oxygen consumption rather than decreasing respiratory activity. Decreased oxygen consumption and decreased ATP production - Although proton leakage can reduce ATP production, it does not usually decrease oxygen consumption when electron donors and oxygen remain available. - The loss of coupling stimulates respiratory electron flow, making decreased oxygen consumption inconsistent with the immediate uncoupling response. Increased oxygen consumption and increased ATP production - Uncoupling can increase oxygen consumption by accelerating electron transport, but the dissipated proton gradient prevents efficient ATP synthesis. - Therefore, increased ATP production does not accompany the elevated respiratory rate; ATP generation decreases despite greater oxygen use.

  10. 10. A splice-site mutation increases an RT-PCR product from 400 to 550 base pairs without changing total transcript abundance. Which molecular event best explains the result? Skipping of a 150-base-pair exon Activation of transcription at the original promoter Shortening of the transcript's poly(A) tail Retention of a 150-base-pair intron

    • A. Shortening of the transcript's poly(A) tail
    • B. Retention of a 150-base-pair intron
    • C. Skipping of a 150-base-pair exon
    • D. Activation of transcription at the original promoter
    Show answer

    Answer: B. Retention of a 150-base-pair intron

    Retention of a 150-base-pair intron - Intron retention adds the 150-base-pair intron to the mature transcript, increasing the cDNA-derived RT-PCR product from 400 to 550 base pairs. - Because total transcript abundance is unchanged, the splice-site mutation most directly affects transcript processing, not transcription initiation or overall transcript production. Shortening of the transcript's poly(A) tail - Poly(A)-tail shortening does not alter the internal transcript sequence amplified by primers, so it would not increase the RT-PCR product from 400 to 550 base pairs. - The observed size change reflects additional retained sequence, whereas poly(A)-tail length is not represented in this internal amplified region. Skipping of a 150-base-pair exon - Exon skipping would remove 150 base pairs from the transcript, producing a 250-base-pair product rather than increasing the product to 550 base pairs. - Although splice-site mutations can cause exon skipping, this choice predicts loss of sequence, contrary to the observed 150-base-pair increase. Activation of transcription at the original promoter - Promoter activation could increase transcript abundance, but it would not add 150 base pairs to the region between internal RT-PCR primers. - The unchanged transcript abundance argues against altered transcription initiation as the explanation for the larger amplified product.

Flashcards: DNA replication and repair

  1. 1. DNA _____ is the process of producing an identical replica of a DNA molecule

    Show answer

    replication

  2. 2. _____ code for proteins that reduce cell cycling or promote DNA repair

    Show answer

    Tumor suppressor genes

  3. 3. _____ are short, newly synthesized DNA fragments formed discontinuously on the lagging strand during DNA replication

    Show answer

    Okazaki fragments

  4. 4. The 5' cap on mRNA is made up of _____ The poly-A tail is made up of _____

    Show answer

    7-methylguanosine · adenine nucleotides

  5. 5. DNA polymerase reads the template strand from _____ → _____ and synthesize the new strand from _____ → _____

    Show answer

    3' · 5’ · 5’ · 3’

  6. 6. A _____ sense RNA strand has a nucleotide sequence complementary to the mRNA that it encodes

    Show answer

    negative

  7. 7. In eukaryotic translation, the 40S ribosome subunit attaches to the _____ and scans for a start codon;

    Show answer

    5’ cap

  8. 8. The three steps in translation are: _____ _____ _____

    Show answer

    Initiation · Elongation · Termination

  9. 9. An operon _____ is a short region of DNA that lies partially within the promoter and interacts with a repressor that controls the transcription of the operon

    Show answer

    operator

  10. 10. A repressible operon under normal conditions will _____

    Show answer

    proceed with transcription

Everything you need for MCAT prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF