Nucleotides and nucleic acid structure

Nucleotides and nucleic acid structure

Published September 28, 2026

Nucleotides and nucleic acid structure

On this page

Quick Overview

  • Nucleic acids are phosphate-backbone polymers for information storage, expression, energy transfer, and signaling.
  • Rapid identification means naming the base, pentose, and phosphate count, then tracking 5-prime to 3-prime polarity and complementarity.

Core Facts & Concepts

  • Definitions
TermCompositionExamples
Nitrogenous baseHeterocyclic base; no sugar or phosphateA, G, C, T, U
NucleosideBase + ribose or deoxyriboseAdenosine, thymidine
NucleotideNucleoside + 1, 2, or 3 phosphate groupsAMP, ADP, ATP
  • Classification: Purines have 2 fused rings: adenine and guanine. Pyrimidines have 1 ring: cytosine, thymine, and uracil.

📌 Remember: Pure As Gold - Purines are adenine and guanine.

  • Sugar: Ribose has a 2-prime hydroxyl and occurs in RNA; deoxyribose has a 2-prime hydrogen and occurs in DNA. DNA uses thymine; RNA uses uracil.
  • Backbone: A phosphodiester bond links the 3-prime hydroxyl of one sugar to the 5-prime phosphate of the next. Sequences are written 5-prime to 3-prime.
  • At physiologic pH, ionized phosphates make nucleic acids strongly negatively charged.
  • ATP supplies phosphate-transfer energy and supports signaling. GTP powers translation, G-protein switching, and microtubule assembly.

Problem-Solving Approach

  1. Count rings: 2 rings means purine; 1 ring means pyrimidine.
  2. Inspect the sugar: a 2-prime hydroxyl indicates ribose; a 2-prime hydrogen indicates deoxyribose.
  3. Count phosphates: base alone is a base; base plus sugar is a nucleoside; adding phosphate creates a nucleotide. Three phosphates identifies ATP or GTP when the base is A or G.
  4. Trace polarity: locate the terminal 5-prime phosphate and 3-prime hydroxyl; write the strand 5-prime to 3-prime.
  5. For synthesis: connect the existing 3-prime hydroxyl to the incoming 5-prime phosphate. Loss of a 3-prime hydroxyl causes chain termination.

⚠️ Warning: Hydrogen bonds join complementary bases; phosphodiester bonds form the covalent sugar-phosphate backbone.

Analysis Framework and Visual Aid

  • DNA versus RNA
FeatureDNARNA
Sugar2-prime hydrogen2-prime hydroxyl
PyrimidineThymineUracil
Typical structureDouble-stranded, antiparallelUsually single-stranded, folded
Main roleStable information storageExpression, catalysis, regulation
  • Pairing: A-T or A-U forms 2 hydrogen bonds; G-C forms 3. Complementary strands run antiparallel.
Loading diagram…

Key Points Summary

  • Base plus sugar equals nucleoside; add phosphate equals nucleotide.
  • Purines A and G have 2 rings; pyrimidines C, T, and U have 1.
  • Ribose has a 2-prime hydroxyl; deoxyribose has a 2-prime hydrogen.
  • The linkage is 3-prime hydroxyl to 5-prime phosphate; polarity is 5-prime to 3-prime.
  • Phosphates create strong negative charge; G-C has 3 hydrogen bonds.
  • ATP supports energy transfer; GTP supports translation and signaling.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: Nucleotides and nucleic acid structure

  1. 1. Two equal-length DNA duplexes are tested under identical conditions. Duplex X has the higher melting temperature. Which feature best explains this result? A greater fraction of G–C base pairs A greater fraction of A–T base pairs A greater number of mismatched base pairs A greater number of single-stranded regions

    • A. A greater number of mismatched base pairs
    • B. A greater fraction of G–C base pairs
    • C. A greater number of single-stranded regions
    • D. A greater fraction of A–T base pairs
    Show answer

    Answer: B. A greater fraction of G–C base pairs

    A greater fraction of G–C base pairs - A greater fraction of G–C base pairs increases duplex stability because G–C pairs form three hydrogen bonds and support favorable base-stacking interactions. - Greater DNA duplex stability requires more heat to separate the strands, producing the higher melting temperature observed for Duplex X. A greater number of mismatched base pairs - Mismatched base pairs disrupt normal hydrogen bonding and base stacking, reducing duplex stability rather than increasing the melting temperature. - Because mismatches create structural irregularities, they weaken the double-stranded DNA and make strand separation occur at a lower temperature. A greater number of single-stranded regions - Single-stranded regions lack the extensive complementary base pairing present in a duplex, reducing hydrogen bonding and stabilizing interactions. - These regions therefore decrease overall duplex stability and would lower, not raise, the temperature required for strand separation. A greater fraction of A–T base pairs - A greater fraction of A–T base pairs generally weakens duplex stability because A–T pairs form only two hydrogen bonds. - With reduced base-pairing stability, less heat is required to separate the strands, so the melting temperature is lower.

  2. 2. Reading the Sanger sequencing gel from bottom to top, what is the newly synthesized strand? 5′-ACTGGATC-3′ 5′-CTAGGTCA-3′ 5′-GATCCAGT-3′ 5′-TGACCTAG-3′

    • A. 5′-TGACCTAG-3′
    • B. 5′-GATCCAGT-3′
    • C. 5′-CTAGGTCA-3′
    • D. 5′-ACTGGATC-3′
    Show answer

    Answer: B. 5′-GATCCAGT-3′

    5′-GATCCAGT-3′ - Reading the shortest fragments from the gel’s bottom upward gives G-A-T-C-C-A-G-T. - Because fragments are ordered by termination position, this lane order directly gives the newly synthesized strand 5′ to 3′: GATCCAGT. 5′-TGACCTAG-3′ - This sequence is the reverse complement of the newly synthesized strand, so it represents the template strand written 5′ to 3′. - Sanger bands are read bottom to top to obtain the synthesized strand directly; reversing and complementing that sequence produces this template orientation instead. 5′-CTAGGTCA-3′ - This choice complements each displayed base but does not reverse the strand orientation required for antiparallel DNA pairing. - The newly synthesized sequence must be read directly bottom to top; complementing that order alone instead yields an incorrectly oriented sequence. 5′-ACTGGATC-3′ - This sequence reverses the band order but does not apply the complementary base-pairing required between template and newly synthesized DNA. - Reading the gel from bottom to top already establishes the synthesized strand’s 5′-to-3′ order, so reversal alone is not appropriate.

  3. 3. The figure shows equal melting temperatures for two purified DNA homoduplexes but a lower melting temperature after their strands are mixed and reannealed. Which conclusion is best supported? The two homoduplexes have substantially different GC contents. The mixed duplex contains more covalent backbone breaks. The two DNA samples differ at one or more nucleotide positions. The mixed duplex is longer than either original homoduplex.

    • A. The mixed duplex is longer than either original homoduplex.
    • B. The two homoduplexes have substantially different GC contents.
    • C. The two DNA samples differ at one or more nucleotide positions.
    • D. The mixed duplex contains more covalent backbone breaks.
    Show answer

    Answer: C. The two DNA samples differ at one or more nucleotide positions.

    The two DNA samples differ at one or more nucleotide positions. - Different nucleotide sequences can create mismatched base pairs when strands from the two samples reanneal. - Mismatches reduce stabilizing hydrogen bonding and base stacking, lowering the mixed duplex’s melting temperature. The mixed duplex is longer than either original homoduplex. - Reannealing changes strand pairing but does not alter the lengths of the original DNA fragments. - A longer duplex would not specifically explain the lower melting temperature observed only after mixing. The two homoduplexes have substantially different GC contents. - Equal melting temperatures of the purified homoduplexes do not support substantially different overall GC contents. - Different GC content would affect the original duplex stability, rather than specifically causing destabilization after strand mixing. The mixed duplex contains more covalent backbone breaks. - Reannealing changes base pairing but does not create covalent breaks in the sugar-phosphate backbone. - Backbone damage is therefore unsupported and would not be the expected consequence of mixing DNA strands.

  4. 4. The mitochondrial matrix is normally negative and alkaline relative to the intermembrane space. What occurs if only the electrical gradient is reversed? ATP synthesis increases because the positive matrix attracts protons ATP synthesis remains unchanged because only the pH gradient matters ATP synthesis increases because both gradients now favor proton entry ATP synthesis decreases because the electrical gradient opposes proton entry

    • A. ATP synthesis increases because both gradients now favor proton entry
    • B. ATP synthesis decreases because the electrical gradient opposes proton entry
    • C. ATP synthesis increases because the positive matrix attracts protons
    • D. ATP synthesis remains unchanged because only the pH gradient matters
    Show answer

    Answer: B. ATP synthesis decreases because the electrical gradient opposes proton entry

    ATP synthesis decreases because the electrical gradient opposes proton entry - Making the matrix positive causes the electrical gradient to repel positively charged protons, opposing their movement from the intermembrane space through ATP synthase. - Although the unchanged chemical gradient still favors proton entry, the opposing electrical component reduces total proton-motive force and consequently decreases ATP synthesis. ATP synthesis increases because both gradients now favor proton entry - The unchanged pH gradient still favors proton movement into the matrix, but reversing the electrical gradient creates an opposing force rather than a second favorable gradient. - Because the two components of proton-motive force now act in opposite directions, their combined driving force decreases; ATP synthase therefore cannot increase ATP production by this mechanism. ATP synthesis increases because the positive matrix attracts protons - A positive matrix does not attract protons; because protons are positively charged, the reversed electrical gradient repels them and opposes their entry. - The unchanged pH gradient remains favorable, but the electrical gradient no longer supports proton movement, so ATP synthesis decreases rather than increases. ATP synthesis remains unchanged because only the pH gradient matters - The proton-motive force depends on both the chemical pH gradient and the electrical membrane-potential gradient, not on pH alone. - Reversing the electrical gradient makes it oppose proton entry despite the unchanged pH gradient, reducing the driving force for ATP synthase and decreasing ATP production.

  5. 5. A fasting-activated kinase phosphorylates glycogen synthase and glycogen phosphorylase, inactivating the former and activating the latter. What is the predicted response? Glycogen synthesis decreases, and glycogen breakdown increases Glycogen synthesis increases, and glycogen breakdown decreases Glycogen synthesis and glycogen breakdown both increase Glycogen synthesis and glycogen breakdown both decrease

    • A. Glycogen synthesis and glycogen breakdown both decrease
    • B. Glycogen synthesis and glycogen breakdown both increase
    • C. Glycogen synthesis increases, and glycogen breakdown decreases
    • D. Glycogen synthesis decreases, and glycogen breakdown increases
    Show answer

    Answer: D. Glycogen synthesis decreases, and glycogen breakdown increases

    Glycogen synthesis decreases, and glycogen breakdown increases - Phosphorylation inactivates glycogen synthase, decreasing glycogen synthesis and limiting glucose storage during fasting. - Phosphorylation activates glycogen phosphorylase, increasing glycogen breakdown and mobilizing stored glucose; both effects match the stated kinase activity. Glycogen synthesis and glycogen breakdown both decrease - Glycogen synthesis would decrease because phosphorylation inactivates glycogen synthase, but this option incorrectly predicts reduced breakdown. - Activated glycogen phosphorylase promotes glycogen degradation during fasting, so glycogen breakdown should increase rather than decrease. Glycogen synthesis and glycogen breakdown both increase - This option reverses the stated effect on glycogen synthase: its phosphorylation inactivates the enzyme, reducing glycogen synthesis. - Fasting activates glycogen phosphorylase, increasing glycogen breakdown; therefore, simultaneous increases represent a storage-promoting rather than fasting response. Glycogen synthesis increases, and glycogen breakdown decreases - The predicted effect on synthesis is reversed: phosphorylation makes glycogen synthase inactive, so glycogen synthesis decreases rather than increases. - Although fasting activates glycogen phosphorylase, this option incorrectly predicts reduced glycogen breakdown instead of increased glycogen degradation.

  6. 6. Importing one amino acid uphill requires 10 kJ/mol, while each cotransported Na+ releases 6 kJ/mol. What is ΔG when two Na+ are coupled? +22 kJ/mol +4 kJ/mol −2 kJ/mol −16 kJ/mol

    • A. −2 kJ/mol
    • B. +22 kJ/mol
    • C. +4 kJ/mol
    • D. −16 kJ/mol
    Show answer

    Answer: A. −2 kJ/mol

    −2 kJ/mol - Each Na+ releases 6 kJ/mol, so two Na+ provide −12 kJ/mol overall. - Combining the amino acid cost of +10 kJ/mol with −12 kJ/mol gives a net ΔG of −2 kJ/mol. +22 kJ/mol - The energy contributions should be combined with their signs, because amino acid import is unfavorable while Na+ cotransport is favorable. - Adding the magnitudes as +10 + 6 + 6 incorrectly treats Na+ release as an energy cost, producing +22 kJ/mol. +4 kJ/mol - This value results from accounting for only one Na+, calculating +10 − 6 = +4 kJ/mol. - The question specifies two cotransported Na+, whose combined favorable contribution must be −12 kJ/mol. −16 kJ/mol - The sodium contribution is −12 kJ/mol, not −16 kJ/mol, so this choice overestimates the favorable energy. - The amino acid requirement remains an unfavorable +10 kJ/mol term and should be added to, rather than subtracted from, the sodium contribution.

  7. 7. A chaperone increases enzyme recovery when present during refolding but has no effect when added after refolding. Which function best explains these results? Increasing the catalytic rate of the native enzyme Preventing aggregation of partially unfolded chains Forming permanent covalent bonds between subunits Stabilizing the transition state of the enzyme reaction

    • A. Increasing the catalytic rate of the native enzyme
    • B. Forming permanent covalent bonds between subunits
    • C. Stabilizing the transition state of the enzyme reaction
    • D. Preventing aggregation of partially unfolded chains
    Show answer

    Answer: D. Preventing aggregation of partially unfolded chains

    Preventing aggregation of partially unfolded chains - Partially unfolded proteins expose hydrophobic regions that can associate incorrectly; chaperones prevent this nonnative aggregation during refolding, increasing recovery of functional enzyme. - After refolding, the enzyme no longer has the same aggregation-prone intermediates, explaining why the chaperone has no additional effect on the native protein. Increasing the catalytic rate of the native enzyme - The chaperone’s effect occurs during refolding, not after the enzyme is native, so it does not increase the catalytic rate of the already folded enzyme. - A catalytic-rate enhancer would be expected to affect native enzyme activity when added after refolding, which the results specifically exclude. Forming permanent covalent bonds between subunits - Chaperone-assisted folding generally does not involve permanent covalent bonds between protein subunits; it facilitates proper folding through reversible interactions. - The observed timing supports prevention of nonnative aggregation, not covalent remodeling that would permanently alter the enzyme’s subunit structure. Stabilizing the transition state of the enzyme reaction - Transition-state stabilization enhances reaction catalysis, so it should affect enzyme activity even when the chaperone is added after refolding. - Because the chaperone helps only during folding, its role is structural rather than catalytic and does not fit transition-state stabilization.

  8. 8. Constrained FRET probes emit only when within 10 nm. Ligand increases receptor–adaptor FRET without changing abundance or localization. Which conclusion is supported? Ligand increases the cellular abundance of both labeled proteins. Ligand increases the fraction of receptor–adaptor pairs within 10 nm. Ligand creates a covalent bond between the receptor and adaptor. Ligand activates acceptor emission independently of donor excitation.

    • A. Ligand creates a covalent bond between the receptor and adaptor.
    • B. Ligand activates acceptor emission independently of donor excitation.
    • C. Ligand increases the cellular abundance of both labeled proteins.
    • D. Ligand increases the fraction of receptor–adaptor pairs within 10 nm.
    Show answer

    Answer: D. Ligand increases the fraction of receptor–adaptor pairs within 10 nm.

    Ligand increases the fraction of receptor–adaptor pairs within 10 nm. - Increased FRET indicates that a greater fraction of receptor–adaptor fluorophores are separated by less than approximately 10 nm under the constrained probe conditions. - Unchanged abundance and localization support altered nanoscale proximity or pairing, rather than increased protein expression or relocalization. Ligand creates a covalent bond between the receptor and adaptor. - Increased proximity does not demonstrate a covalent bond; receptor and adaptor fluorophores can be within 10 nm without forming a direct chemical linkage. - FRET distance information supports nanoscale closeness, not the specific molecular interaction or bond type connecting the proteins. Ligand activates acceptor emission independently of donor excitation. - FRET requires donor excitation followed by nonradiative energy transfer to a nearby acceptor, so acceptor emission is not independent of donor excitation. - Increased FRET therefore reflects changed donor–acceptor proximity rather than ligand directly activating acceptor fluorescence. Ligand increases the cellular abundance of both labeled proteins. - Protein abundance was unchanged, so the ligand cannot be concluded to increase the cellular amounts of either labeled protein. - FRET intensity can increase when a greater fraction of existing receptor–adaptor pairs approach within the detection range, without producing more protein.

  9. 9. An agonist causes receptor serine phosphorylation and a downstream response. Which experiment most directly tests whether that phosphorylation is necessary for the response? Replace the serine with alanine, match receptor expression, and measure the agonist response Replace the serine with aspartate, omit the agonist, and measure the downstream response Add a broad kinase inhibitor before the agonist and measure the downstream response Measure receptor phosphorylation and the downstream response at additional time points

    • A. Replace the serine with aspartate, omit the agonist, and measure the downstream response
    • B. Replace the serine with alanine, match receptor expression, and measure the agonist response
    • C. Add a broad kinase inhibitor before the agonist and measure the downstream response
    • D. Measure receptor phosphorylation and the downstream response at additional time points
    Show answer

    Answer: B. Replace the serine with alanine, match receptor expression, and measure the agonist response

    Replace the serine with alanine, match receptor expression, and measure the agonist response - Alanine cannot be phosphorylated, so loss of signaling after agonist exposure would directly test whether modification of that serine is necessary. - Matching receptor expression controls for differences in receptor abundance, making the response comparison more specific to the phosphorylation site. Replace the serine with aspartate, omit the agonist, and measure the downstream response - An aspartate substitution mimics the negative charge of phosphorylation and primarily tests whether that state is sufficient for signaling. - Omitting the agonist also prevents assessment of whether agonist-induced phosphorylation is necessary for the normal downstream response. Add a broad kinase inhibitor before the agonist and measure the downstream response - A broad kinase inhibitor may block multiple kinases and other pathway components, so any lost response would not specifically implicate receptor phosphorylation. - This approach introduces off-target ambiguity rather than isolating the contribution of the particular serine residue. Measure receptor phosphorylation and the downstream response at additional time points - Additional time points could strengthen a temporal correlation between phosphorylation and signaling but cannot demonstrate that phosphorylation is required. - A response may occur after or independently of the modification, so timing alone does not establish causality.

  10. 10. A transaminase converts 15N-labeled glutamate and pyruvate into α-ketoglutarate and alanine. Which product initially contains most of the transferred label? Alanine α-Ketoglutarate Pyruvate Acetyl-CoA

    • A. α-Ketoglutarate
    • B. Pyruvate
    • C. Alanine
    • D. Acetyl-CoA
    Show answer

    Answer: C. Alanine

    Alanine - The amino group from 15N-labeled glutamate is transferred directly to pyruvate, forming alanine. - Thus, 15N-labeled alanine initially contains most of the transferred label, while glutamate’s carbon skeleton becomes α-ketoglutarate. α-Ketoglutarate - Transamination removes glutamate’s amino group, leaving its carbon skeleton as α-ketoglutarate. - Because the 15N label is transferred with the amino group, α-ketoglutarate initially contains little or none of the transferred nitrogen. Pyruvate - Pyruvate is the amino-group acceptor in this reaction and is converted into alanine. - It is therefore a reactant, not the product that initially retains most of the transferred 15N label. Acetyl-CoA - Acetyl-CoA is neither a direct reactant nor a direct product of this transamination. - Its formation involves other metabolic reactions, so it does not initially contain the transferred 15N label.

Flashcards: Nucleotides and nucleic acid structure

  1. 1. The secondary structure of nucleic acids is made up of _____

    Show answer

    interactions between bases within the same molecule

  2. 2. The nitrogenous bases in DNA and RNA include: _____ _____ _____ _____ _____

    Show answer

    Guanine · Cytosine · Adenine · Thymine (DNA only) · Uracil (RNA only)

  3. 3. The above molecule is an Omega-_____ fatty acid

    Show answer

    3

  4. 4. Triglyceride storage in _____ comprises the principal energy reserve in mammals

    Show answer

    adipose tissue

  5. 5. Omega fatty acids are classified according to the _____

    Show answer

    location of the first double bond from the omega end

  6. 6. The omega end of a fatty acid is the _____ end

    Show answer

    methyl

  7. 7. This is the monosaccharide _____

    Show answer

    galactose

  8. 8. Polysaccharides are formed by repeated _____ bonds between monosaccharide units.

    Show answer

    glycosidic

  9. 9. In plants, energy is stored in the form of _____

    Show answer

    starch

  10. 10. This is the monosaccharide _____

    Show answer

    fructose

Everything you need for MCAT prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF