DNA double helix and RNA types

DNA double helix and RNA types

Published September 28, 2026

DNA double helix and RNA types

On this page

Quick Overview

  • 🎯 DNA stores hereditary information in a stable, antiparallel duplex; complementary pairing supports replication, sequencing, and mutation detection.
  • RNA uses related pairing, but ribose 2′-OH and uracil permit flexible folds and diverse gene-expression functions.

Core Facts & Concepts

  • Architecture: Strands run 5′→3′ and 3′→5′; sugar-phosphate backbones face outward and bases stack inward.
  • Complementarity: One purine pairs with one pyrimidine. A-T forms 2 hydrogen bonds; G-C forms 3.
PairHydrogen bonds
A-T2
G-C3
  • Grooves: The major groove is wider and exposes more base-pair chemical signatures; the minor groove is narrower. DNA-binding proteins read sequence through these grooves.
  • Duplex stability: %GC = 100 × (G + C)/N. At equal length and salt conditions, GC-rich duplexes have higher melting temperature (Tm); length, ionic strength, and mismatches also matter.
  • DNA versus RNA: DNA has deoxyribose, which lacks a 2′-OH, and thymine. RNA has ribose with 2′-OH and uracil; it is usually single-stranded but folds using A-U and G-C pairs.

Problem-Solving Approach

  • 1. Orient: Mark 5′ and 3′ ends. To write a complement in 5′→3′ order, use the reverse complement.
  • 2. Pair: DNA uses A-T and G-C; RNA uses A-U and G-C. Total DNA hydrogen bonds = 2 × AT + 3 × GC.
  • 3. Quantify: Calculate %GC; predict higher Tm only after checking length, salt, and mismatches. For short oligos, use the rough Wallace estimate: Tm ≈ 2(A+T) + 4(G+C) °C.
  • 4. Classify: Use structure plus function; sequence alone rarely identifies an RNA class.

⚠️ Warning: The template strand is read 3′→5′; the coding strand matches RNA except DNA uses T where RNA uses U.

Analysis Framework and Visual Aid

  • RNA-class comparison:
RNA typeStructure clueMain role
mRNAUsually linear; codons; eukaryotic 5′ cap and poly-A tailCarries coding transcript to ribosome
tRNAAbout 70-90 nt; cloverleaf; anticodon; 3′ CCADelivers a specific amino acid
rRNAExtensively folded; complexed with ribosomal proteinsRibosome scaffold and catalytic center
Regulatory RNAmiRNA about 22 nt, siRNA 21-23 nt, or lncRNA over 200 ntSilences mRNA or regulates gene expression
  • Fast discriminator: Codons indicate mRNA; anticodon plus amino acid attachment indicates tRNA; ribosome indicates rRNA; gene-control effects indicate regulatory RNA.
  • Visual classifier:
Loading diagram…

Key Points Summary

  • A-T = 2; G-C = 3 hydrogen bonds; one purine plus one pyrimidine maintains helix width.
  • Antiparallel strands run 5′→3′ and 3′→5′; rewrite a complement as its reverse complement.
  • Higher GC% generally raises Tm, but salt, length, and mismatches matter.
  • DNA = deoxyribose plus T; RNA = ribose 2′-OH plus U.
  • mRNA carries code; tRNA adapts; rRNA scaffolds and catalyzes; regulatory RNA controls expression.
  • 🚩 Pitfall: A-T does not have three hydrogen bonds, and RNA normally uses U rather than T.

📌 Remember: AT two, GC three - bond count for rapid pairing checks.
⭐ Clinical Pearl: GC-rich probes bind more tightly; mismatches can destabilize hybridization and expose sequence variants.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: DNA double helix and RNA types

  1. 1. The figure shows equal melting temperatures for two purified DNA homoduplexes but a lower melting temperature after their strands are mixed and reannealed. Which conclusion is best supported? The two homoduplexes have substantially different GC contents. The mixed duplex contains more covalent backbone breaks. The two DNA samples differ at one or more nucleotide positions. The mixed duplex is longer than either original homoduplex.

    • A. The mixed duplex is longer than either original homoduplex.
    • B. The two homoduplexes have substantially different GC contents.
    • C. The two DNA samples differ at one or more nucleotide positions.
    • D. The mixed duplex contains more covalent backbone breaks.
    Show answer

    Answer: C. The two DNA samples differ at one or more nucleotide positions.

    The two DNA samples differ at one or more nucleotide positions. - Different nucleotide sequences can create mismatched base pairs when strands from the two samples reanneal. - Mismatches reduce stabilizing hydrogen bonding and base stacking, lowering the mixed duplex’s melting temperature. The mixed duplex is longer than either original homoduplex. - Reannealing changes strand pairing but does not alter the lengths of the original DNA fragments. - A longer duplex would not specifically explain the lower melting temperature observed only after mixing. The two homoduplexes have substantially different GC contents. - Equal melting temperatures of the purified homoduplexes do not support substantially different overall GC contents. - Different GC content would affect the original duplex stability, rather than specifically causing destabilization after strand mixing. The mixed duplex contains more covalent backbone breaks. - Reannealing changes base pairing but does not create covalent breaks in the sugar-phosphate backbone. - Backbone damage is therefore unsupported and would not be the expected consequence of mixing DNA strands.

  2. 2. A compound raises reporter-protein abundance. Researchers propose increased reporter transcription or slower protein degradation. Which follow-up best distinguishes these mechanisms? Compare reporter mRNA abundance and protein decay rates with and without the compound. Repeat the reporter-protein measurement using a larger number of cultures. Compare an unrelated housekeeping protein with and without the compound. Correlate reporter-protein abundance with compound concentration across treated cultures.

    • A. Correlate reporter-protein abundance with compound concentration across treated cultures.
    • B. Compare an unrelated housekeeping protein with and without the compound.
    • C. Compare reporter mRNA abundance and protein decay rates with and without the compound.
    • D. Repeat the reporter-protein measurement using a larger number of cultures.
    Show answer

    Answer: C. Compare reporter mRNA abundance and protein decay rates with and without the compound.

    Compare reporter mRNA abundance and protein decay rates with and without the compound. - Increased reporter mRNA abundance with treatment supports enhanced transcription, whereas unchanged mRNA would argue against transcription as the primary mechanism. - Measuring protein decay rates directly tests stability; slower decay with treatment supports reduced degradation, distinguishing it from increased transcription. Correlate reporter-protein abundance with compound concentration across treated cultures. - A dose-response correlation shows whether abundance changes with compound concentration, but does not reveal whether transcription or degradation caused the increase. - Protein abundance can rise through either mechanism, so concentration dependence alone cannot distinguish mRNA production from protein stability. Compare an unrelated housekeeping protein with and without the compound. - Comparing a housekeeping protein may test whether the effect is nonspecific, but it does not directly measure reporter transcription or degradation. - An unchanged unrelated protein cannot distinguish increased reporter mRNA synthesis from reduced reporter protein decay. Repeat the reporter-protein measurement using a larger number of cultures. - Using more cultures improves precision and statistical power, but it repeats the abundance measurement without probing the underlying mechanism. - A larger sample cannot distinguish increased transcription from slower protein degradation unless mRNA or decay is measured.

  3. 3. The mitochondrial matrix is normally negative and alkaline relative to the intermembrane space. What occurs if only the electrical gradient is reversed? ATP synthesis increases because the positive matrix attracts protons ATP synthesis remains unchanged because only the pH gradient matters ATP synthesis increases because both gradients now favor proton entry ATP synthesis decreases because the electrical gradient opposes proton entry

    • A. ATP synthesis increases because both gradients now favor proton entry
    • B. ATP synthesis decreases because the electrical gradient opposes proton entry
    • C. ATP synthesis increases because the positive matrix attracts protons
    • D. ATP synthesis remains unchanged because only the pH gradient matters
    Show answer

    Answer: B. ATP synthesis decreases because the electrical gradient opposes proton entry

    ATP synthesis decreases because the electrical gradient opposes proton entry - Making the matrix positive causes the electrical gradient to repel positively charged protons, opposing their movement from the intermembrane space through ATP synthase. - Although the unchanged chemical gradient still favors proton entry, the opposing electrical component reduces total proton-motive force and consequently decreases ATP synthesis. ATP synthesis increases because both gradients now favor proton entry - The unchanged pH gradient still favors proton movement into the matrix, but reversing the electrical gradient creates an opposing force rather than a second favorable gradient. - Because the two components of proton-motive force now act in opposite directions, their combined driving force decreases; ATP synthase therefore cannot increase ATP production by this mechanism. ATP synthesis increases because the positive matrix attracts protons - A positive matrix does not attract protons; because protons are positively charged, the reversed electrical gradient repels them and opposes their entry. - The unchanged pH gradient remains favorable, but the electrical gradient no longer supports proton movement, so ATP synthesis decreases rather than increases. ATP synthesis remains unchanged because only the pH gradient matters - The proton-motive force depends on both the chemical pH gradient and the electrical membrane-potential gradient, not on pH alone. - Reversing the electrical gradient makes it oppose proton entry despite the unchanged pH gradient, reducing the driving force for ATP synthase and decreasing ATP production.

  4. 4. A fasting-activated kinase phosphorylates glycogen synthase and glycogen phosphorylase, inactivating the former and activating the latter. What is the predicted response? Glycogen synthesis decreases, and glycogen breakdown increases Glycogen synthesis increases, and glycogen breakdown decreases Glycogen synthesis and glycogen breakdown both increase Glycogen synthesis and glycogen breakdown both decrease

    • A. Glycogen synthesis and glycogen breakdown both decrease
    • B. Glycogen synthesis and glycogen breakdown both increase
    • C. Glycogen synthesis increases, and glycogen breakdown decreases
    • D. Glycogen synthesis decreases, and glycogen breakdown increases
    Show answer

    Answer: D. Glycogen synthesis decreases, and glycogen breakdown increases

    Glycogen synthesis decreases, and glycogen breakdown increases - Phosphorylation inactivates glycogen synthase, decreasing glycogen synthesis and limiting glucose storage during fasting. - Phosphorylation activates glycogen phosphorylase, increasing glycogen breakdown and mobilizing stored glucose; both effects match the stated kinase activity. Glycogen synthesis and glycogen breakdown both decrease - Glycogen synthesis would decrease because phosphorylation inactivates glycogen synthase, but this option incorrectly predicts reduced breakdown. - Activated glycogen phosphorylase promotes glycogen degradation during fasting, so glycogen breakdown should increase rather than decrease. Glycogen synthesis and glycogen breakdown both increase - This option reverses the stated effect on glycogen synthase: its phosphorylation inactivates the enzyme, reducing glycogen synthesis. - Fasting activates glycogen phosphorylase, increasing glycogen breakdown; therefore, simultaneous increases represent a storage-promoting rather than fasting response. Glycogen synthesis increases, and glycogen breakdown decreases - The predicted effect on synthesis is reversed: phosphorylation makes glycogen synthase inactive, so glycogen synthesis decreases rather than increases. - Although fasting activates glycogen phosphorylase, this option incorrectly predicts reduced glycogen breakdown instead of increased glycogen degradation.

  5. 5. Importing one amino acid uphill requires 10 kJ/mol, while each cotransported Na+ releases 6 kJ/mol. What is ΔG when two Na+ are coupled? +22 kJ/mol +4 kJ/mol −2 kJ/mol −16 kJ/mol

    • A. −2 kJ/mol
    • B. +22 kJ/mol
    • C. +4 kJ/mol
    • D. −16 kJ/mol
    Show answer

    Answer: A. −2 kJ/mol

    −2 kJ/mol - Each Na+ releases 6 kJ/mol, so two Na+ provide −12 kJ/mol overall. - Combining the amino acid cost of +10 kJ/mol with −12 kJ/mol gives a net ΔG of −2 kJ/mol. +22 kJ/mol - The energy contributions should be combined with their signs, because amino acid import is unfavorable while Na+ cotransport is favorable. - Adding the magnitudes as +10 + 6 + 6 incorrectly treats Na+ release as an energy cost, producing +22 kJ/mol. +4 kJ/mol - This value results from accounting for only one Na+, calculating +10 − 6 = +4 kJ/mol. - The question specifies two cotransported Na+, whose combined favorable contribution must be −12 kJ/mol. −16 kJ/mol - The sodium contribution is −12 kJ/mol, not −16 kJ/mol, so this choice overestimates the favorable energy. - The amino acid requirement remains an unfavorable +10 kJ/mol term and should be added to, rather than subtracted from, the sodium contribution.

  6. 6. A chaperone increases enzyme recovery when present during refolding but has no effect when added after refolding. Which function best explains these results? Increasing the catalytic rate of the native enzyme Preventing aggregation of partially unfolded chains Forming permanent covalent bonds between subunits Stabilizing the transition state of the enzyme reaction

    • A. Increasing the catalytic rate of the native enzyme
    • B. Forming permanent covalent bonds between subunits
    • C. Stabilizing the transition state of the enzyme reaction
    • D. Preventing aggregation of partially unfolded chains
    Show answer

    Answer: D. Preventing aggregation of partially unfolded chains

    Preventing aggregation of partially unfolded chains - Partially unfolded proteins expose hydrophobic regions that can associate incorrectly; chaperones prevent this nonnative aggregation during refolding, increasing recovery of functional enzyme. - After refolding, the enzyme no longer has the same aggregation-prone intermediates, explaining why the chaperone has no additional effect on the native protein. Increasing the catalytic rate of the native enzyme - The chaperone’s effect occurs during refolding, not after the enzyme is native, so it does not increase the catalytic rate of the already folded enzyme. - A catalytic-rate enhancer would be expected to affect native enzyme activity when added after refolding, which the results specifically exclude. Forming permanent covalent bonds between subunits - Chaperone-assisted folding generally does not involve permanent covalent bonds between protein subunits; it facilitates proper folding through reversible interactions. - The observed timing supports prevention of nonnative aggregation, not covalent remodeling that would permanently alter the enzyme’s subunit structure. Stabilizing the transition state of the enzyme reaction - Transition-state stabilization enhances reaction catalysis, so it should affect enzyme activity even when the chaperone is added after refolding. - Because the chaperone helps only during folding, its role is structural rather than catalytic and does not fit transition-state stabilization.

  7. 7. Constrained FRET probes emit only when within 10 nm. Ligand increases receptor–adaptor FRET without changing abundance or localization. Which conclusion is supported? Ligand increases the cellular abundance of both labeled proteins. Ligand increases the fraction of receptor–adaptor pairs within 10 nm. Ligand creates a covalent bond between the receptor and adaptor. Ligand activates acceptor emission independently of donor excitation.

    • A. Ligand creates a covalent bond between the receptor and adaptor.
    • B. Ligand activates acceptor emission independently of donor excitation.
    • C. Ligand increases the cellular abundance of both labeled proteins.
    • D. Ligand increases the fraction of receptor–adaptor pairs within 10 nm.
    Show answer

    Answer: D. Ligand increases the fraction of receptor–adaptor pairs within 10 nm.

    Ligand increases the fraction of receptor–adaptor pairs within 10 nm. - Increased FRET indicates that a greater fraction of receptor–adaptor fluorophores are separated by less than approximately 10 nm under the constrained probe conditions. - Unchanged abundance and localization support altered nanoscale proximity or pairing, rather than increased protein expression or relocalization. Ligand creates a covalent bond between the receptor and adaptor. - Increased proximity does not demonstrate a covalent bond; receptor and adaptor fluorophores can be within 10 nm without forming a direct chemical linkage. - FRET distance information supports nanoscale closeness, not the specific molecular interaction or bond type connecting the proteins. Ligand activates acceptor emission independently of donor excitation. - FRET requires donor excitation followed by nonradiative energy transfer to a nearby acceptor, so acceptor emission is not independent of donor excitation. - Increased FRET therefore reflects changed donor–acceptor proximity rather than ligand directly activating acceptor fluorescence. Ligand increases the cellular abundance of both labeled proteins. - Protein abundance was unchanged, so the ligand cannot be concluded to increase the cellular amounts of either labeled protein. - FRET intensity can increase when a greater fraction of existing receptor–adaptor pairs approach within the detection range, without producing more protein.

  8. 8. An agonist causes receptor serine phosphorylation and a downstream response. Which experiment most directly tests whether that phosphorylation is necessary for the response? Replace the serine with alanine, match receptor expression, and measure the agonist response Replace the serine with aspartate, omit the agonist, and measure the downstream response Add a broad kinase inhibitor before the agonist and measure the downstream response Measure receptor phosphorylation and the downstream response at additional time points

    • A. Replace the serine with aspartate, omit the agonist, and measure the downstream response
    • B. Replace the serine with alanine, match receptor expression, and measure the agonist response
    • C. Add a broad kinase inhibitor before the agonist and measure the downstream response
    • D. Measure receptor phosphorylation and the downstream response at additional time points
    Show answer

    Answer: B. Replace the serine with alanine, match receptor expression, and measure the agonist response

    Replace the serine with alanine, match receptor expression, and measure the agonist response - Alanine cannot be phosphorylated, so loss of signaling after agonist exposure would directly test whether modification of that serine is necessary. - Matching receptor expression controls for differences in receptor abundance, making the response comparison more specific to the phosphorylation site. Replace the serine with aspartate, omit the agonist, and measure the downstream response - An aspartate substitution mimics the negative charge of phosphorylation and primarily tests whether that state is sufficient for signaling. - Omitting the agonist also prevents assessment of whether agonist-induced phosphorylation is necessary for the normal downstream response. Add a broad kinase inhibitor before the agonist and measure the downstream response - A broad kinase inhibitor may block multiple kinases and other pathway components, so any lost response would not specifically implicate receptor phosphorylation. - This approach introduces off-target ambiguity rather than isolating the contribution of the particular serine residue. Measure receptor phosphorylation and the downstream response at additional time points - Additional time points could strengthen a temporal correlation between phosphorylation and signaling but cannot demonstrate that phosphorylation is required. - A response may occur after or independently of the modification, so timing alone does not establish causality.

  9. 9. A transaminase converts 15N-labeled glutamate and pyruvate into α-ketoglutarate and alanine. Which product initially contains most of the transferred label? Alanine α-Ketoglutarate Pyruvate Acetyl-CoA

    • A. α-Ketoglutarate
    • B. Pyruvate
    • C. Alanine
    • D. Acetyl-CoA
    Show answer

    Answer: C. Alanine

    Alanine - The amino group from 15N-labeled glutamate is transferred directly to pyruvate, forming alanine. - Thus, 15N-labeled alanine initially contains most of the transferred label, while glutamate’s carbon skeleton becomes α-ketoglutarate. α-Ketoglutarate - Transamination removes glutamate’s amino group, leaving its carbon skeleton as α-ketoglutarate. - Because the 15N label is transferred with the amino group, α-ketoglutarate initially contains little or none of the transferred nitrogen. Pyruvate - Pyruvate is the amino-group acceptor in this reaction and is converted into alanine. - It is therefore a reactant, not the product that initially retains most of the transferred 15N label. Acetyl-CoA - Acetyl-CoA is neither a direct reactant nor a direct product of this transamination. - Its formation involves other metabolic reactions, so it does not initially contain the transferred 15N label.

  10. 10. PCR primers within one exon produce the same 300-bp product from an RNA preparation with or without reverse transcriptase. Which interpretation is best supported? The RNA was extensively degraded during isolation. The primers annealed inefficiently during amplification. The preparation was contaminated with genomic DNA. The transcripts retained introns after RNA processing.

    • A. The preparation was contaminated with genomic DNA.
    • B. The transcripts retained introns after RNA processing.
    • C. The primers annealed inefficiently during amplification.
    • D. The RNA was extensively degraded during isolation.
    Show answer

    Answer: A. The preparation was contaminated with genomic DNA.

    The preparation was contaminated with genomic DNA. - Genomic DNA contamination provides a DNA template that ordinary PCR can amplify even when reverse transcriptase is omitted. - Because both primers lie within one exon, contaminated genomic DNA can produce the same 300-bp amplicon as the reverse-transcribed sample. The transcripts retained introns after RNA processing. - Unspliced transcripts would still be RNA and therefore require reverse transcription before serving as PCR templates. - Retained introns would not explain amplification in the no-reverse-transcriptase control, so this interpretation does not fit the result. The primers annealed inefficiently during amplification. - Inefficient primer annealing would reduce amplification efficiency, but it would affect reactions with and without reverse transcriptase similarly. - This factor does not identify why a PCR product appears in the no-reverse-transcriptase reaction or establish its template source. The RNA was extensively degraded during isolation. - RNA degradation would reduce the amount of intact RNA available for reverse transcription and generally decrease product formation. - It would not explain a product without reverse transcriptase, because degraded RNA cannot provide a DNA template for ordinary PCR.

Flashcards: DNA double helix and RNA types

  1. 1. DNA is _____ charged due to its phosphate backbone

    Show answer

    negatively

  2. 2. The nitrogenous bases in DNA and RNA include: _____ _____ _____ _____ _____

    Show answer

    Guanine · Cytosine · Adenine · Thymine (DNA only) · Uracil (RNA only)

  3. 3. RNA uses a _____ sugar and uses _____ instead of _____

    Show answer

    ribose · uracil · thymine

  4. 4. The _____ states that DNA is a double-stranded, helical structure

    Show answer

    Watson-Crick model

  5. 5. The above molecule is an Omega-_____ fatty acid

    Show answer

    3

  6. 6. The omega end of a fatty acid is the _____ end

    Show answer

    methyl

  7. 7. Triglyceride storage in _____ comprises the principal energy reserve in mammals

    Show answer

    adipose tissue

  8. 8. Omega fatty acids are classified according to the _____

    Show answer

    location of the first double bond from the omega end

  9. 9. This is the monosaccharide _____

    Show answer

    galactose

  10. 10. Polysaccharides are formed by repeated _____ bonds between monosaccharide units.

    Show answer

    glycosidic

Everything you need for MCAT prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF