Receptors and second-messenger signaling

Receptors and second-messenger signaling

Published September 28, 2026

Receptors and second-messenger signaling

On this page

Quick Overview

  • Receptors convert ligand binding into ion flux, enzyme activity, or gene expression, amplifying extracellular information.
  • Hydrophilic ligands (peptides, catecholamines) generally use plasma-membrane receptors; lipophilic ligands (steroids, thyroid hormone, retinoids) reach cytosolic or nuclear receptors and usually act more slowly.

Core Facts & Concepts

  • 📊 Receptor classes:
ClassLocation and architectureSignature
GPCRPlasma membrane; 7 transmembrane helicesG proteins and second messengers
RTKPlasma membrane; single passDimerization and autophosphorylation
Ligand-gated channelPlasma membraneIon flux in milliseconds
Intracellular/nuclear receptorCytosol or nucleusDNA response elements; transcription over hours
  • 🎯 Second-messenger map:
    • Gs activates adenylyl cyclase: ATP → cAMP → PKA; Gi inhibits adenylyl cyclase.
    • Gq activates PLC: PIP2 → IP3 + DAG; IP3 releases ER Ca2+, while DAG plus Ca2+ activates conventional PKC.
    • NO → soluble guanylyl cyclase → cGMP → PKG; natriuretic peptides stimulate membrane guanylyl cyclase.
    • PI3K converts PIP2 → PIP3 → Akt; PTEN reverses PIP3.
  • Resting cytosolic Ca2+ is approximately 100 nM; IP3 and channels raise it rapidly, whereas pumps restore baseline.

Problem-Solving Approach

  1. Classify the ligand by solubility; predict membrane versus intracellular signaling.
  2. Match architecture: 7TM GPCR, single-pass enzyme-linked receptor, channel, or DNA-binding receptor.
  3. Trace the branch: AC/cAMP, PLC/IP3-DAG/Ca2+, GC/cGMP, or PI3K/PIP3/Akt.
  4. Use time course: milliseconds suggests channel opening; seconds to minutes suggests second messengers; hours suggests transcription.
  5. Audit shutdown: phosphodiesterases (PDEs), phosphatases, Ca2+ pumps, PTEN, and GRK/beta-arrestin internalization. Persistent signaling or absent response despite ligand suggests defective termination or desensitization.

⚠️ Warning: Not every GPCR uses cAMP; Gq signaling uses PLC, IP3, DAG, and Ca2+.

Analysis Framework & Visual Aid

  • 📊 Discriminate by messenger and off-switch:
PathwayDiscriminatorMain effectorOff-switch
cAMPGs/Gi and ACPKAPDEs, phosphatases
cGMPNO or natriuretic peptide and GCPKGPDEs
IP3/DAG/Ca2+Gq and PLCER calcium release, PKC, calmodulinMetabolism, pumps
PIP3PI3KAktPTEN, phosphatases
Loading diagram…

Key Points Summary

  • Membrane receptors handle hydrophilic ligands; intracellular receptors handle lipophilic ligands.
  • GPCR = 7TM; RTK = single pass; channel = milliseconds; nuclear receptor = hours.
  • cAMP activates PKA; cGMP activates PKG; PDEs terminate both.
  • PLC makes IP3 plus DAG: IP3 releases ER Ca2+, while DAG/Ca2+ activates PKC.
  • PI3K makes PIP3; Akt signals downstream; PTEN reverses it.
  • Signaling sequence: activation → amplification → response → termination.
  • 📌 Remember: Gs stimulates, Gi inhibits, Gq cleaves - AC, AC, PLC.
  • ⭐ Clinical Pearl: PDE inhibition prolongs cyclic-nucleotide signals; receptor blockade does not remove existing messenger.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: Receptors and second-messenger signaling

  1. 1. Ligand shortens a receptor's half-life without changing its mRNA. A lysosome inhibitor restores total but not surface receptor, whereas an endocytosis inhibitor restores both. Which mechanism is best supported? Ligand-induced reduction of receptor transcription Ligand-induced receptor degradation by proteasomes Ligand-induced receptor internalization followed by lysosomal degradation Ligand-induced inhibition of receptor translation

    • A. Ligand-induced receptor internalization followed by lysosomal degradation
    • B. Ligand-induced receptor degradation by proteasomes
    • C. Ligand-induced inhibition of receptor translation
    • D. Ligand-induced reduction of receptor transcription
    Show answer

    Answer: A. Ligand-induced receptor internalization followed by lysosomal degradation

    Ligand-induced receptor internalization followed by lysosomal degradation - Endocytosis inhibitor restoration of both total and surface receptor shows that ligand-triggered internalization is required for receptor loss from the membrane. - Lysosome inhibitor restoration of total receptor identifies lysosomal degradation after internalization, while persistent surface reduction indicates trafficking into the degradative pathway. Ligand-induced receptor degradation by proteasomes - Proteasomal degradation is not supported because inhibiting lysosomes restores total receptor, directly implicating lysosomal rather than proteasomal disposal. - Proteasomes generally mediate cytosolic protein degradation and would not explain why blocking endocytosis restores the receptor at the cell surface. Ligand-induced inhibition of receptor translation - Translation inhibition would reduce production of newly synthesized receptor but would not directly account for the ligand-induced shortening of receptor half-life. - The differential rescue by lysosome and endocytosis inhibitors demonstrates post-translational trafficking and degradation, rather than reduced receptor synthesis. Ligand-induced reduction of receptor transcription - Unchanged receptor mRNA argues against ligand-induced transcriptional reduction as the cause of decreased receptor abundance. - Transcriptional regulation would not explain rescue by endocytosis inhibition or the lysosome-dependent loss of existing receptor protein.

  2. 2. Agonist decreases surface wild-type receptor but not a Ser-to-Ala variant; total abundance and initial ligand binding are equal. Which finding most strengthens the proposed role of serine phosphorylation? Restoring serine rescues agonist-dependent phosphorylation and receptor internalization. Wild-type and variant receptors produce equal signaling before agonist exposure. Wild-type receptors colocalize with lysosomes after prolonged agonist exposure. Agonist decreases receptor mRNA equally in wild-type and variant cells.

    • A. Restoring serine rescues agonist-dependent phosphorylation and receptor internalization.
    • B. Agonist decreases receptor mRNA equally in wild-type and variant cells.
    • C. Wild-type receptors colocalize with lysosomes after prolonged agonist exposure.
    • D. Wild-type and variant receptors produce equal signaling before agonist exposure.
    Show answer

    Answer: A. Restoring serine rescues agonist-dependent phosphorylation and receptor internalization.

    Restoring serine rescues agonist-dependent phosphorylation and receptor internalization. - Serine restoration rescues agonist-dependent phosphorylation, directly connecting the modified residue to receptor regulation rather than merely correlating the mutation with reduced surface abundance. - Rescue of receptor internalization demonstrates that phosphorylation at this site is functionally linked to the trafficking phenotype while controlling for unintended differences between receptor constructs. Agonist decreases receptor mRNA equally in wild-type and variant cells. - Equal decreases in receptor mRNA indicate similar transcriptional regulation but do not establish that serine phosphorylation controls receptor internalization. - The observed difference concerns rapid surface-receptor trafficking, so unchanged or equal mRNA changes cannot explain the agonist-dependent difference between wild-type and variant receptors. Wild-type receptors colocalize with lysosomes after prolonged agonist exposure. - Wild-type colocalization with lysosomes supports a later fate of receptors after internalization but does not test whether the altered serine is required. - Because the variant is not assessed for the same trafficking step, this finding cannot directly link serine phosphorylation to the initial agonist-dependent internalization event. Wild-type and variant receptors produce equal signaling before agonist exposure. - Equal pre-agonist signaling indicates that the variant retains baseline receptor function, helping exclude a constitutive defect but not identifying the mechanism of internalization. - This result does not demonstrate agonist-dependent phosphorylation or explain why surface receptor abundance diverges only after agonist exposure.

  3. 3. A compound raises reporter-protein abundance. Researchers propose increased reporter transcription or slower protein degradation. Which follow-up best distinguishes these mechanisms? Compare reporter mRNA abundance and protein decay rates with and without the compound. Repeat the reporter-protein measurement using a larger number of cultures. Compare an unrelated housekeeping protein with and without the compound. Correlate reporter-protein abundance with compound concentration across treated cultures.

    • A. Correlate reporter-protein abundance with compound concentration across treated cultures.
    • B. Compare an unrelated housekeeping protein with and without the compound.
    • C. Compare reporter mRNA abundance and protein decay rates with and without the compound.
    • D. Repeat the reporter-protein measurement using a larger number of cultures.
    Show answer

    Answer: C. Compare reporter mRNA abundance and protein decay rates with and without the compound.

    Compare reporter mRNA abundance and protein decay rates with and without the compound. - Increased reporter mRNA abundance with treatment supports enhanced transcription, whereas unchanged mRNA would argue against transcription as the primary mechanism. - Measuring protein decay rates directly tests stability; slower decay with treatment supports reduced degradation, distinguishing it from increased transcription. Correlate reporter-protein abundance with compound concentration across treated cultures. - A dose-response correlation shows whether abundance changes with compound concentration, but does not reveal whether transcription or degradation caused the increase. - Protein abundance can rise through either mechanism, so concentration dependence alone cannot distinguish mRNA production from protein stability. Compare an unrelated housekeeping protein with and without the compound. - Comparing a housekeeping protein may test whether the effect is nonspecific, but it does not directly measure reporter transcription or degradation. - An unchanged unrelated protein cannot distinguish increased reporter mRNA synthesis from reduced reporter protein decay. Repeat the reporter-protein measurement using a larger number of cultures. - Using more cultures improves precision and statistical power, but it repeats the abundance measurement without probing the underlying mechanism. - A larger sample cannot distinguish increased transcription from slower protein degradation unless mRNA or decay is measured.

  4. 4. A DNA polymerase variant copies DNA at a normal rate but produces substantially more base substitutions. Loss of which activity best explains this finding? 3′→5′ exonuclease removal of mismatched nucleotides 5′→3′ exonuclease removal of RNA primers DNA ligase sealing of phosphodiester-backbone nicks DNA helicase separation of parental strands

    • A. DNA ligase sealing of phosphodiester-backbone nicks
    • B. DNA helicase separation of parental strands
    • C. 5′→3′ exonuclease removal of RNA primers
    • D. 3′→5′ exonuclease removal of mismatched nucleotides
    Show answer

    Answer: D. 3′→5′ exonuclease removal of mismatched nucleotides

    3′→5′ exonuclease removal of mismatched nucleotides - The 3′→5′ exonuclease activity removes a mismatched nucleotide from the growing strand’s 3′ end, allowing the polymerase to insert the correct base. - Loss of proofreading increases base substitutions while leaving the polymerase’s core copying activity and overall synthesis rate relatively intact. DNA ligase sealing of phosphodiester-backbone nicks - DNA ligase seals phosphodiester-backbone nicks between DNA fragments after synthesis, but it does not inspect whether newly incorporated bases are correctly paired. - Loss of ligase would disrupt DNA strand continuity and replication completion rather than selectively increase base substitutions while preserving a normal copying rate. DNA helicase separation of parental strands - DNA helicase separates parental strands to provide single-stranded templates for replication; it does not remove incorrectly incorporated nucleotides. - Loss of helicase would primarily impair replication progression or initiation, not selectively reduce fidelity while maintaining a normal replication rate. 5′→3′ exonuclease removal of RNA primers - The 5′→3′ exonuclease activity removes RNA primers during processing of newly synthesized DNA, especially on discontinuous strands. - Although primer removal is essential for fragment maturation, it does not directly proofread mismatched bases incorporated during DNA synthesis.

  5. 5. Heating a DNA duplex causes strand separation and increased absorbance at 260 nm. Which molecular change most directly produces this hyperchromic effect? Hydrolysis of phosphodiester bonds into individual nucleotides Deprotonation of phosphate groups along the DNA backbone Conversion of guanine–cytosine pairs into adenine–thymine pairs Loss of interactions that stack adjacent aromatic bases

    • A. Hydrolysis of phosphodiester bonds into individual nucleotides
    • B. Conversion of guanine–cytosine pairs into adenine–thymine pairs
    • C. Loss of interactions that stack adjacent aromatic bases
    • D. Deprotonation of phosphate groups along the DNA backbone
    Show answer

    Answer: C. Loss of interactions that stack adjacent aromatic bases

    Loss of interactions that stack adjacent aromatic bases - Denaturation disrupts stacking interactions between adjacent aromatic bases, increasing their exposure and therefore their ultraviolet absorbance at 260 nm. - Loss of base stacking directly produces the hyperchromic effect while the DNA strands separate, even though the nucleotide sequence and covalent backbone remain unchanged. Hydrolysis of phosphodiester bonds into individual nucleotides - Thermal denaturation separates DNA strands by disrupting noncovalent interactions, but it does not normally hydrolyze the covalent phosphodiester backbone into individual nucleotides. - Because the backbone remains intact, phosphodiester hydrolysis is not responsible for the increased 260-nm absorbance during ordinary DNA melting. Conversion of guanine–cytosine pairs into adenine–thymine pairs - Heating does not change the DNA nucleotide sequence or convert one base-pair type into another; it primarily disrupts noncovalent interactions between the strands. - The hyperchromic effect reflects altered exposure of existing bases, not formation of adenine–thymine pairs from guanine–cytosine pairs. Deprotonation of phosphate groups along the DNA backbone - Phosphate deprotonation changes the backbone’s ionization state, but it is not the principal structural event during thermal DNA denaturation. - The absorbance increase arises from disruption of base stacking and greater exposure of aromatic bases, rather than altered phosphate-group charge.

  6. 6. A catalyst makes A ⇌ B reach equilibrium faster but leaves the equilibrium ratio unchanged. Which mechanism explains the result? It lowers the reaction’s free-energy change and favors B formation. It lowers the activation energies of both reaction directions equally. It raises the reverse activation energy while lowering the forward barrier. It supplies chemical energy that maintains a new equilibrium ratio.

    • A. It raises the reverse activation energy while lowering the forward barrier.
    • B. It supplies chemical energy that maintains a new equilibrium ratio.
    • C. It lowers the activation energies of both reaction directions equally.
    • D. It lowers the reaction’s free-energy change and favors B formation.
    Show answer

    Answer: C. It lowers the activation energies of both reaction directions equally.

    It lowers the activation energies of both reaction directions equally. - The catalyst stabilizes the transition state, lowering activation energies for both the forward and reverse reactions. - Because it does not change the reaction’s relative thermodynamics, the equilibrium ratio remains unchanged while equilibrium is reached more quickly. It raises the reverse activation energy while lowering the forward barrier. - A catalyst lowers the activation energy for both directions rather than selectively raising the reverse barrier, allowing equilibrium to be reached faster. - Changing only one directional barrier would alter the forward-to-reverse rate relationship, conflicting with the unchanged equilibrium ratio. It supplies chemical energy that maintains a new equilibrium ratio. - An ordinary catalyst does not supply chemical energy; it provides an alternative pathway with lower activation barriers. - A catalyst cannot maintain a nonequilibrium product ratio because equilibrium composition is determined by thermodynamics, not reaction rate. It lowers the reaction’s free-energy change and favors B formation. - A catalyst does not lower the reaction’s overall free-energy change; it lowers the activation barrier along the reaction pathway. - Changing the free-energy change would alter the equilibrium constant and favor B, contrary to the stated unchanged equilibrium ratio.

  7. 7. A Na+-amino acid cotransporter accumulates an amino acid against its concentration gradient. What will occur after prolonged inhibition of the Na+/K+ ATPase? Uptake will increase as the intracellular Na+ concentration rises. Uptake will remain unchanged because the cotransporter does not hydrolyze ATP. Uptake will reverse immediately because the amino acid gradient points outward. Uptake will decrease as the inward Na+ electrochemical gradient dissipates.

    • A. Uptake will increase as the intracellular Na+ concentration rises.
    • B. Uptake will remain unchanged because the cotransporter does not hydrolyze ATP.
    • C. Uptake will reverse immediately because the amino acid gradient points outward.
    • D. Uptake will decrease as the inward Na+ electrochemical gradient dissipates.
    Show answer

    Answer: D. Uptake will decrease as the inward Na+ electrochemical gradient dissipates.

    Uptake will decrease as the inward Na+ electrochemical gradient dissipates. - The Na+/K+ ATPase maintains low intracellular Na+, creating the inward Na+ electrochemical gradient that powers amino acid accumulation against its gradient. - With prolonged inhibition, intracellular Na+ rises and the driving gradient dissipates, decreasing secondary active amino acid uptake. Uptake will increase as the intracellular Na+ concentration rises. - Rising intracellular Na+ reduces the Na+ concentration gradient driving cotransport into the cell, so it cannot increase amino acid uptake. - The Na+/K+ ATPase normally keeps intracellular Na+ low; inhibiting it causes Na+ accumulation and weakens the inward Na+ electrochemical gradient. Uptake will remain unchanged because the cotransporter does not hydrolyze ATP. - Although the cotransporter does not directly hydrolyze ATP, it relies indirectly on the Na+ gradient established by ATP-dependent pumping. - After prolonged pump inhibition, the dissipating gradient provides less energy for secondary active transport, so uptake does not remain unchanged. Uptake will reverse immediately because the amino acid gradient points outward. - The amino acid gradient alone does not establish that transport will reverse; the cotransporter’s direction depends on the combined Na+ and amino acid electrochemical gradients. - Prolonged pump inhibition first causes gradual gradient dissipation, so immediate reversal is not supported by the stated information.

  8. 8. Equal-sized proteins are loaded onto a cation-exchange column at pH 7.5. Which protein should be retained most strongly? A protein with a pI of 4 A protein with a pI of 6 A protein with a pI of 8 A protein with a pI of 10

    • A. A protein with a pI of 6
    • B. A protein with a pI of 8
    • C. A protein with a pI of 4
    • D. A protein with a pI of 10
    Show answer

    Answer: D. A protein with a pI of 10

    A protein with a pI of 10 - At pH 7.5, the pH is below this protein’s pI of 10, giving it the greatest net positive charge among the choices. - Cation-exchange resin binds positively charged proteins, so this protein should experience the strongest electrostatic attraction and be retained most strongly. A protein with a pI of 6 - At pH 7.5, this protein’s pH exceeds its pI of 6, giving it a net negative charge rather than the positive charge favored by a cation-exchange column. - Because negatively charged proteins are not strongly attracted to the negatively charged column resin, this protein should be retained less strongly than proteins with pI values above 7.5. A protein with a pI of 8 - At pH 7.5, this protein’s pH is slightly below its pI of 8, so it has a slight net positive charge and can bind the cation-exchange resin. - Its relatively small positive charge produces weaker electrostatic attraction than the pI 10 protein, which is more positively charged at pH 7.5. A protein with a pI of 4 - At pH 7.5, this protein’s pH is well above its pI of 4, so it has a strongly net negative charge. - A cation-exchange column retains positively charged molecules; therefore, this negatively charged protein should have little favorable interaction with the resin.

  9. 9. A protein with pI 9.0 is purified at pH 7.0. Which ion-exchange behavior is expected? Binding an anion exchanger and eluting as salt concentration increases Binding a cation exchanger and eluting as salt concentration increases Binding a cation exchanger and eluting as salt concentration decreases Passing through both exchangers because the protein has no net charge

    • A. Binding a cation exchanger and eluting as salt concentration increases
    • B. Binding a cation exchanger and eluting as salt concentration decreases
    • C. Binding an anion exchanger and eluting as salt concentration increases
    • D. Passing through both exchangers because the protein has no net charge
    Show answer

    Answer: A. Binding a cation exchanger and eluting as salt concentration increases

    Binding a cation exchanger and eluting as salt concentration increases - At pH 7, below its pI of 9, the protein has a net positive charge and binds the negatively charged resin of a cation exchanger. - Increasing salt concentration competes for ionic interactions between the protein and resin, promoting elution from the exchanger. Binding a cation exchanger and eluting as salt concentration decreases - A positively charged protein can bind a cation exchanger, so the exchanger type is appropriate. - Decreasing salt generally strengthens electrostatic binding rather than disrupting the interaction, so it would not promote elution. Binding an anion exchanger and eluting as salt concentration increases - At a pH below its pI, the protein is predominantly positively charged, not negatively charged. - Anion exchangers bind negatively charged proteins, whereas this protein binds the negatively charged resin of a cation exchanger. Passing through both exchangers because the protein has no net charge - A protein has approximately zero net charge near its pI, not at pH 7 when its pI is 9. - Because the solution pH is below the pI, the protein remains positively charged and can bind an ion-exchange resin.

Flashcards: Receptors and second-messenger signaling

  1. 1. _____ in cell membranes allow for rapid exchange of ions and other small molecules between adjacent cells

    Show answer

    Gap junctions

  2. 2. Enzyme-linked receptors participate in cell signaling through extracellular ligand binding and initiation of _____

    Show answer

    2nd messenger cascades

  3. 3. _____ in cell membranes prevent solutes from leaking into the space between cells via a paracellular route, but do not provide intercellular transport

    Show answer

    Tight junctions

  4. 4. During osmosis, water moves from an area of _____ solute concentration to an area of _____ solute concentration

    Show answer

    low · high

  5. 5. At high temperatures, cholesterol will _____ fluidity

    Show answer

    decrease

  6. 6. _____ is a form of passive transport and describes the diffusion of water across a selectively permeable membrane

    Show answer

    Osmosis

  7. 7. The resting potential of most cells is between _____ and _____ mV

    Show answer

    -40 · -80

  8. 8. _____ harnesses the energy released by one particle going down its electrochemical gradient to drive a different particle up its gradient

    Show answer

    Secondary active transport

  9. 9. _____ is the pressure that needs to be applied to a solution to prevent the inward flow of water (prevent osmosis)

    Show answer

    Osmotic pressure

  10. 10. _____ is when the molecule moves down its concentration gradient, so no energy is required

    Show answer

    Passive transport

Everything you need for MCAT prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF