Active transport, pumps and secondary transport

Active transport, pumps and secondary transport

Published September 28, 2026

Active transport, pumps and secondary transport

On this page

Quick Overview

  • Primary active transport uses ATP hydrolysis to move solutes against electrochemical gradients; secondary active transport uses a pre-existing ion gradient.
  • These systems establish membrane voltage, cell volume, calcium signaling, gastric acid secretion, and nutrient uptake.

Core Facts & Concepts

  • Na+/K+-ATPase: 1 ATP moves 3 Na+ out and 2 K+ in; net +1 charge out, making it electrogenic. It maintains low intracellular Na+ and high intracellular K+.

  • Ca2+-ATPases: PMCA extrudes cytosolic Ca2+; SERCA sequesters 2 Ca2+ per ATP into ER or SR for relaxation and storage.
  • H+/K+-ATPase: Gastric pump exchanges 1 H+ out for 1 K+ in per ATP; 1:1 charge balance makes it electroneutral. Proton-pump inhibitors block it.
  • Symporters move solutes together; SGLT brings Na+ and glucose inward. Antiporters move solutes oppositely; NCX commonly brings 3 Na+ in while exporting 1 Ca2+.
  • ΔGcoupled = ΔGcargo + ΔGion; coupling is favorable when total ΔG ≤ 0.
  • Electrogenic: net charge crosses the membrane. Electroneutral: charge transfer balances.

Problem-Solving Approach

  1. Ask: Is ATP used directly? Yes means primary active transport. No means identify a Na+ or H+ gradient.
  2. Identify the driving gradient: the ion moves downhill electrochemically while cargo may move uphill.
  3. Classify direction: same direction means symport; opposite directions mean antiport.
  4. Check charge movement: unequal charge transfer is electrogenic; equal charge transfer is electroneutral.
  5. Predict inhibition: blocking a primary pump collapses its gradient, impairing secondary transport and cell-volume control.

⭐ Clinical Pearl: Digoxin inhibits Na+/K+-ATPase, raising intracellular Na+, reducing NCX-mediated Ca2+ extrusion, and increasing contractility.

⚠️ Warning: GLUT transport is facilitated diffusion-not ATP-driven or secondary active transport.

Analysis Framework & Visual Aid

TransporterEnergy sourceMovementElectrical effectClassic role
Na+/K+-ATPaseDirect ATP3 Na+ out, 2 K+ inElectrogenicIon gradients
PMCA/SERCADirect ATPCa2+ out or 2 Ca2+ into ER/SRCounterion-dependentCa2+ control
H+/K+-ATPaseDirect ATPH+ out, K+ inElectrically neutralGastric acid
SGLTNa+ gradientNa+ and glucose togetherElectrogenicGlucose uptake
NCXNa+ gradient3 Na+ in, 1 Ca2+ outElectrogenicCa2+ extrusion
NHENa+ gradientNa+ in, H+ outUsually neutralpH regulation
Loading diagram…

Key Points Summary

  • 🎯 3 Na+ out, 2 K+ in, 1 ATP: net +1 charge out.
  • Direct ATP use = primary transport; gradient use = secondary transport.
  • Same direction = symport; opposite direction = antiport.
  • SERCA transports 2 Ca2+ per ATP; H+/K+-ATPase is 1:1 and neutral.
  • 🚩 Pitfall: Electrogenicity depends on net charge movement, not ATP use.
  • ⭐ Clinical pearl: Na+/K+-ATPase inhibition increases intracellular Ca2+ through NCX effects.

📌 Remember: 3 out, 2 in, 1 positive out - Na+/K+-ATPase.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: Active transport, pumps and secondary transport

  1. 1. Blocking the basolateral Na+/K+ ATPase in intestinal epithelial cells raises intracellular Na+ and reduces apical glucose uptake without changing transporter abundance. What explains the reduction? Dissipation of the inward Na+ gradient that powers glucose cotransport Depletion of intracellular Na+ that reverses glucose diffusion Removal of the apical glucose cotransporter from the membrane Loss of ATP hydrolysis by the basolateral glucose carrier

    • A. Dissipation of the inward Na+ gradient that powers glucose cotransport
    • B. Depletion of intracellular Na+ that reverses glucose diffusion
    • C. Removal of the apical glucose cotransporter from the membrane
    • D. Loss of ATP hydrolysis by the basolateral glucose carrier
    Show answer

    Answer: A. Dissipation of the inward Na+ gradient that powers glucose cotransport

    Dissipation of the inward Na+ gradient that powers glucose cotransport - The Na+/K+ ATPase normally maintains low intracellular Na+, generating the electrochemical gradient needed for apical secondary active Na+-glucose cotransport. - Blocking the pump raises intracellular Na+ and dissipates the inward Na+ gradient, reducing glucose uptake even though transporter abundance remains unchanged. Depletion of intracellular Na+ that reverses glucose diffusion - ATPase inhibition causes intracellular Na+ accumulation, not depletion, so this option reverses the actual ion-concentration change described in the stem. - Reduced glucose uptake results from loss of the inward Na+ driving force, rather than from Na+ diffusion reversing because intracellular Na+ becomes lower. Removal of the apical glucose cotransporter from the membrane - The stem explicitly states that transporter abundance is unchanged, ruling out removal of the apical glucose cotransporter from the membrane. - The functional defect is loss of the Na+ electrochemical gradient, which powers cotransport despite the continued presence of the transporter. Loss of ATP hydrolysis by the basolateral glucose carrier - Basolateral glucose carriers generally mediate facilitated diffusion and therefore do not directly hydrolyze ATP to transport glucose. - The ATP-dependent protein is the Na+/K+ ATPase, whose inhibition indirectly reduces apical glucose uptake by disrupting the Na+ gradient.

  2. 2. Transporter-containing proteoliposomes accumulate solute S only with an inward Na+ gradient; an Na+ ionophore eliminates uptake, whereas ATP depletion does not. Transporter-free liposomes show negligible uptake. Which mechanism is best supported? ATP hydrolysis directly powers transporter-mediated S uptake. The Na+ electrochemical gradient drives transporter-mediated S uptake. Passive diffusion through the lipid bilayer drives S uptake. Metabolism inside the liposomes generates the required Na+ gradient.

    • A. The Na+ electrochemical gradient drives transporter-mediated S uptake.
    • B. ATP hydrolysis directly powers transporter-mediated S uptake.
    • C. Passive diffusion through the lipid bilayer drives S uptake.
    • D. Metabolism inside the liposomes generates the required Na+ gradient.
    Show answer

    Answer: A. The Na+ electrochemical gradient drives transporter-mediated S uptake.

    The Na+ electrochemical gradient drives transporter-mediated S uptake. - Uptake requires both the transporter and an inward Na+ electrochemical gradient, supporting secondary active cotransport powered by Na+ movement. - An Na+ ionophore eliminates uptake, demonstrating that maintaining the Na+ gradient is necessary for transporter-mediated S accumulation. ATP hydrolysis directly powers transporter-mediated S uptake. - ATP depletion does not eliminate uptake, arguing against ATP hydrolysis as the direct energy source for transport. - The experiment instead supports secondary active transport, in which Na+ movement down its gradient supplies the energy for solute uptake. Passive diffusion through the lipid bilayer drives S uptake. - Transporter-free liposomes show negligible uptake, contradicting passive diffusion through the lipid bilayer as the main mechanism. - Dependence on an inward Na+ gradient further indicates protein-mediated cotransport rather than unrestricted bilayer permeation. Metabolism inside the liposomes generates the required Na+ gradient. - The required Na+ gradient was experimentally imposed, so internal metabolism is not needed to generate it. - Ionophore-mediated loss of uptake shows that gradient maintenance, rather than metabolism inside the liposomes, is essential.

  3. 3. The uptake curves shown are saturable, inhibited by a related solute, and unchanged after ATP depletion. Which transport mechanism is most consistent? Primary active transport through an ATPase Facilitated diffusion through a specific carrier Simple diffusion through the lipid bilayer Receptor-mediated uptake by endocytosis

    • A. Simple diffusion through the lipid bilayer
    • B. Primary active transport through an ATPase
    • C. Facilitated diffusion through a specific carrier
    • D. Receptor-mediated uptake by endocytosis
    Show answer

    Answer: C. Facilitated diffusion through a specific carrier

    Facilitated diffusion through a specific carrier - Saturation and competition by a related solute indicate a finite number of specific substrate-binding carriers. - Unchanged uptake after ATP depletion shows that direct ATP hydrolysis is unnecessary, consistent with facilitated diffusion. Simple diffusion through the lipid bilayer - Simple diffusion is generally proportional to the concentration gradient and does not show a finite transport capacity. - The observed saturation and inhibition by a related solute indicate specific carrier binding rather than movement directly through the lipid bilayer. Primary active transport through an ATPase - Primary active transport through an ATPase requires direct energy from ATP hydrolysis. - Because uptake remains unchanged after ATP depletion, an ATPase-dependent mechanism is not supported. Receptor-mediated uptake by endocytosis - Receptor-mediated endocytosis is an energy-dependent uptake process that would be expected to decline after ATP depletion. - The observed carrier-like competition and saturation support membrane transport through a specific carrier rather than vesicular internalization.

  4. 4. Intestinal glucose uptake decreases when extracellular sodium is removed or the basolateral Na+/K+ ATPase is inhibited. Which transport mechanism best explains both observations? Glucose crosses by simple diffusion coupled directly to sodium diffusion Glucose enters by cotransport down a sodium gradient maintained using ATP Glucose enters through an apical pump that directly hydrolyzes ATP Glucose enters by facilitated diffusion driven only by its concentration gradient

    • A. Glucose enters by cotransport down a sodium gradient maintained using ATP
    • B. Glucose enters by facilitated diffusion driven only by its concentration gradient
    • C. Glucose enters through an apical pump that directly hydrolyzes ATP
    • D. Glucose crosses by simple diffusion coupled directly to sodium diffusion
    Show answer

    Answer: A. Glucose enters by cotransport down a sodium gradient maintained using ATP

    Glucose enters by cotransport down a sodium gradient maintained using ATP - Apical sodium–glucose cotransport uses the sodium electrochemical gradient to drive glucose uptake into intestinal cells against its concentration gradient. - The basolateral Na⁺/K⁺ ATPase hydrolyzes ATP to maintain low intracellular sodium, explaining why uptake decreases when extracellular sodium is removed or the pump is inhibited. Glucose enters by facilitated diffusion driven only by its concentration gradient - Facilitated diffusion uses a carrier but does not require sodium coupling or energy-dependent maintenance of a sodium gradient. - The observed dependence on extracellular sodium and Na⁺/K⁺ ATPase activity shows that glucose uptake is not driven solely by its concentration gradient. Glucose enters through an apical pump that directly hydrolyzes ATP - The apical transporter is a secondary active cotransporter, not a pump that directly hydrolyzes ATP at the membrane. - ATP is used indirectly by the basolateral Na⁺/K⁺ ATPase to establish the sodium gradient that powers apical glucose uptake. Glucose crosses by simple diffusion coupled directly to sodium diffusion - Simple diffusion does not involve carrier-mediated coupling between sodium and glucose, so it cannot explain the coordinated transport described. - The effects of removing extracellular sodium and inhibiting the Na⁺/K⁺ ATPase demonstrate dependence on a maintained sodium gradient, rather than direct diffusion.

  5. 5. The figure plots insight-problem accuracy after low or high fixation induction, with or without an unrelated-task break. Which interpretation is best supported? The break improves performance equally at both levels of fixation Fixation improves performance only when participants receive a break The unrelated task impairs low-fixation performance through retroactive interference The break selectively reduces the performance impairment associated with high fixation

    • A. Fixation improves performance only when participants receive a break
    • B. The unrelated task impairs low-fixation performance through retroactive interference
    • C. The break selectively reduces the performance impairment associated with high fixation
    • D. The break improves performance equally at both levels of fixation
    Show answer

    Answer: C. The break selectively reduces the performance impairment associated with high fixation

    The break selectively reduces the performance impairment associated with high fixation - The break produces a large accuracy benefit after high fixation, but little change after low fixation. - This interaction supports incubation reducing the performance impairment caused by fixation during insight problem solving. Fixation improves performance only when participants receive a break - The break effect differs across fixation conditions rather than appearing only in one condition. - High fixation lowers accuracy, and the break does not make fixation performance-enhancing. The unrelated task impairs low-fixation performance through retroactive interference - Low-fixation accuracy remains approximately stable after the unrelated-task break. - Thus, the graph does not support retroactive interference selectively impairing low-fixation performance. The break improves performance equally at both levels of fixation - The graph shows different break effects under low versus high fixation, not an equal improvement. - The substantial benefit occurs primarily with high fixation, while low-fixation performance changes little.

  6. 6. A DNA polymerase variant copies DNA at a normal rate but produces substantially more base substitutions. Loss of which activity best explains this finding? 3′→5′ exonuclease removal of mismatched nucleotides 5′→3′ exonuclease removal of RNA primers DNA ligase sealing of phosphodiester-backbone nicks DNA helicase separation of parental strands

    • A. DNA ligase sealing of phosphodiester-backbone nicks
    • B. DNA helicase separation of parental strands
    • C. 5′→3′ exonuclease removal of RNA primers
    • D. 3′→5′ exonuclease removal of mismatched nucleotides
    Show answer

    Answer: D. 3′→5′ exonuclease removal of mismatched nucleotides

    3′→5′ exonuclease removal of mismatched nucleotides - The 3′→5′ exonuclease activity removes a mismatched nucleotide from the growing strand’s 3′ end, allowing the polymerase to insert the correct base. - Loss of proofreading increases base substitutions while leaving the polymerase’s core copying activity and overall synthesis rate relatively intact. DNA ligase sealing of phosphodiester-backbone nicks - DNA ligase seals phosphodiester-backbone nicks between DNA fragments after synthesis, but it does not inspect whether newly incorporated bases are correctly paired. - Loss of ligase would disrupt DNA strand continuity and replication completion rather than selectively increase base substitutions while preserving a normal copying rate. DNA helicase separation of parental strands - DNA helicase separates parental strands to provide single-stranded templates for replication; it does not remove incorrectly incorporated nucleotides. - Loss of helicase would primarily impair replication progression or initiation, not selectively reduce fidelity while maintaining a normal replication rate. 5′→3′ exonuclease removal of RNA primers - The 5′→3′ exonuclease activity removes RNA primers during processing of newly synthesized DNA, especially on discontinuous strands. - Although primer removal is essential for fragment maturation, it does not directly proofread mismatched bases incorporated during DNA synthesis.

  7. 7. Heating a DNA duplex causes strand separation and increased absorbance at 260 nm. Which molecular change most directly produces this hyperchromic effect? Hydrolysis of phosphodiester bonds into individual nucleotides Deprotonation of phosphate groups along the DNA backbone Conversion of guanine–cytosine pairs into adenine–thymine pairs Loss of interactions that stack adjacent aromatic bases

    • A. Hydrolysis of phosphodiester bonds into individual nucleotides
    • B. Conversion of guanine–cytosine pairs into adenine–thymine pairs
    • C. Loss of interactions that stack adjacent aromatic bases
    • D. Deprotonation of phosphate groups along the DNA backbone
    Show answer

    Answer: C. Loss of interactions that stack adjacent aromatic bases

    Loss of interactions that stack adjacent aromatic bases - Denaturation disrupts stacking interactions between adjacent aromatic bases, increasing their exposure and therefore their ultraviolet absorbance at 260 nm. - Loss of base stacking directly produces the hyperchromic effect while the DNA strands separate, even though the nucleotide sequence and covalent backbone remain unchanged. Hydrolysis of phosphodiester bonds into individual nucleotides - Thermal denaturation separates DNA strands by disrupting noncovalent interactions, but it does not normally hydrolyze the covalent phosphodiester backbone into individual nucleotides. - Because the backbone remains intact, phosphodiester hydrolysis is not responsible for the increased 260-nm absorbance during ordinary DNA melting. Conversion of guanine–cytosine pairs into adenine–thymine pairs - Heating does not change the DNA nucleotide sequence or convert one base-pair type into another; it primarily disrupts noncovalent interactions between the strands. - The hyperchromic effect reflects altered exposure of existing bases, not formation of adenine–thymine pairs from guanine–cytosine pairs. Deprotonation of phosphate groups along the DNA backbone - Phosphate deprotonation changes the backbone’s ionization state, but it is not the principal structural event during thermal DNA denaturation. - The absorbance increase arises from disruption of base stacking and greater exposure of aromatic bases, rather than altered phosphate-group charge.

  8. 8. A catalyst makes A ⇌ B reach equilibrium faster but leaves the equilibrium ratio unchanged. Which mechanism explains the result? It lowers the reaction’s free-energy change and favors B formation. It lowers the activation energies of both reaction directions equally. It raises the reverse activation energy while lowering the forward barrier. It supplies chemical energy that maintains a new equilibrium ratio.

    • A. It raises the reverse activation energy while lowering the forward barrier.
    • B. It supplies chemical energy that maintains a new equilibrium ratio.
    • C. It lowers the activation energies of both reaction directions equally.
    • D. It lowers the reaction’s free-energy change and favors B formation.
    Show answer

    Answer: C. It lowers the activation energies of both reaction directions equally.

    It lowers the activation energies of both reaction directions equally. - The catalyst stabilizes the transition state, lowering activation energies for both the forward and reverse reactions. - Because it does not change the reaction’s relative thermodynamics, the equilibrium ratio remains unchanged while equilibrium is reached more quickly. It raises the reverse activation energy while lowering the forward barrier. - A catalyst lowers the activation energy for both directions rather than selectively raising the reverse barrier, allowing equilibrium to be reached faster. - Changing only one directional barrier would alter the forward-to-reverse rate relationship, conflicting with the unchanged equilibrium ratio. It supplies chemical energy that maintains a new equilibrium ratio. - An ordinary catalyst does not supply chemical energy; it provides an alternative pathway with lower activation barriers. - A catalyst cannot maintain a nonequilibrium product ratio because equilibrium composition is determined by thermodynamics, not reaction rate. It lowers the reaction’s free-energy change and favors B formation. - A catalyst does not lower the reaction’s overall free-energy change; it lowers the activation barrier along the reaction pathway. - Changing the free-energy change would alter the equilibrium constant and favor B, contrary to the stated unchanged equilibrium ratio.

  9. 9. A Na+-amino acid cotransporter accumulates an amino acid against its concentration gradient. What will occur after prolonged inhibition of the Na+/K+ ATPase? Uptake will increase as the intracellular Na+ concentration rises. Uptake will remain unchanged because the cotransporter does not hydrolyze ATP. Uptake will reverse immediately because the amino acid gradient points outward. Uptake will decrease as the inward Na+ electrochemical gradient dissipates.

    • A. Uptake will increase as the intracellular Na+ concentration rises.
    • B. Uptake will remain unchanged because the cotransporter does not hydrolyze ATP.
    • C. Uptake will reverse immediately because the amino acid gradient points outward.
    • D. Uptake will decrease as the inward Na+ electrochemical gradient dissipates.
    Show answer

    Answer: D. Uptake will decrease as the inward Na+ electrochemical gradient dissipates.

    Uptake will decrease as the inward Na+ electrochemical gradient dissipates. - The Na+/K+ ATPase maintains low intracellular Na+, creating the inward Na+ electrochemical gradient that powers amino acid accumulation against its gradient. - With prolonged inhibition, intracellular Na+ rises and the driving gradient dissipates, decreasing secondary active amino acid uptake. Uptake will increase as the intracellular Na+ concentration rises. - Rising intracellular Na+ reduces the Na+ concentration gradient driving cotransport into the cell, so it cannot increase amino acid uptake. - The Na+/K+ ATPase normally keeps intracellular Na+ low; inhibiting it causes Na+ accumulation and weakens the inward Na+ electrochemical gradient. Uptake will remain unchanged because the cotransporter does not hydrolyze ATP. - Although the cotransporter does not directly hydrolyze ATP, it relies indirectly on the Na+ gradient established by ATP-dependent pumping. - After prolonged pump inhibition, the dissipating gradient provides less energy for secondary active transport, so uptake does not remain unchanged. Uptake will reverse immediately because the amino acid gradient points outward. - The amino acid gradient alone does not establish that transport will reverse; the cotransporter’s direction depends on the combined Na+ and amino acid electrochemical gradients. - Prolonged pump inhibition first causes gradual gradient dissipation, so immediate reversal is not supported by the stated information.

  10. 10. Ligand shortens a receptor's half-life without changing its mRNA. A lysosome inhibitor restores total but not surface receptor, whereas an endocytosis inhibitor restores both. Which mechanism is best supported? Ligand-induced reduction of receptor transcription Ligand-induced receptor degradation by proteasomes Ligand-induced receptor internalization followed by lysosomal degradation Ligand-induced inhibition of receptor translation

    • A. Ligand-induced receptor internalization followed by lysosomal degradation
    • B. Ligand-induced receptor degradation by proteasomes
    • C. Ligand-induced inhibition of receptor translation
    • D. Ligand-induced reduction of receptor transcription
    Show answer

    Answer: A. Ligand-induced receptor internalization followed by lysosomal degradation

    Ligand-induced receptor internalization followed by lysosomal degradation - Endocytosis inhibitor restoration of both total and surface receptor shows that ligand-triggered internalization is required for receptor loss from the membrane. - Lysosome inhibitor restoration of total receptor identifies lysosomal degradation after internalization, while persistent surface reduction indicates trafficking into the degradative pathway. Ligand-induced receptor degradation by proteasomes - Proteasomal degradation is not supported because inhibiting lysosomes restores total receptor, directly implicating lysosomal rather than proteasomal disposal. - Proteasomes generally mediate cytosolic protein degradation and would not explain why blocking endocytosis restores the receptor at the cell surface. Ligand-induced inhibition of receptor translation - Translation inhibition would reduce production of newly synthesized receptor but would not directly account for the ligand-induced shortening of receptor half-life. - The differential rescue by lysosome and endocytosis inhibitors demonstrates post-translational trafficking and degradation, rather than reduced receptor synthesis. Ligand-induced reduction of receptor transcription - Unchanged receptor mRNA argues against ligand-induced transcriptional reduction as the cause of decreased receptor abundance. - Transcriptional regulation would not explain rescue by endocytosis inhibition or the lysosome-dependent loss of existing receptor protein.

Flashcards: Active transport, pumps and secondary transport

  1. 1. _____ harnesses the energy released by one particle going down its electrochemical gradient to drive a different particle up its gradient

    Show answer

    Secondary active transport

  2. 2. Membrane potential is maintained by the _____ and by _____

    Show answer

    Na+/K+ pump · leak channels

  3. 3. The 1st messenger in the above example of a G-protein coupled receptor is _____

    Show answer

    epinephrine

  4. 4. During osmosis, water moves from an area of _____ solute concentration to an area of _____ solute concentration

    Show answer

    low · high

  5. 5. At high temperatures, cholesterol will _____ fluidity

    Show answer

    decrease

  6. 6. _____ is a form of passive transport and describes the diffusion of water across a selectively permeable membrane

    Show answer

    Osmosis

  7. 7. The resting potential of most cells is between _____ and _____ mV

    Show answer

    -40 · -80

  8. 8. _____ is the pressure that needs to be applied to a solution to prevent the inward flow of water (prevent osmosis)

    Show answer

    Osmotic pressure

  9. 9. _____ is when the molecule moves down its concentration gradient, so no energy is required

    Show answer

    Passive transport

Everything you need for MCAT prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF