Learning Outcome Statement
Describe, interpret, and evaluate measures of skewness and kurtosis.
On the exam: The question gives periodic return observations or summary moments, states the sample or population convention and any null or tail convention, then asks for a calculation, interpretation, or evaluation in a table, graph, fill-in, or multiple-choice shape.
Skewness tells you whether unusual outcomes stretch farther on the gain side or loss side. Kurtosis tells you how strongly extreme deviations affect the return distribution, without telling you which side is longer. You will see periodic returns, so keep their frequency and the sample or population convention fixed before calculating.
The normal benchmarks are reference points rather than pass or fail cutoffs. Cubing preserves a centered return's sign, while the fourth power makes both tails contribute positively.
For a return observation, use $r_i$, where $i$ identifies the observation. The count is $n$. For a sample, the center is $\bar{r}$ and the standard deviation is $s$, both in percentage points per month. For a population, the center is $\mu$ and the standard deviation is $\sigma$ in the same units.
| Measure | Normal benchmark | Form |
|---|---|---|
| Skewness | $0$ | Third central moment over standard deviation cubed |
| Pearson kurtosis | $3$ | Fourth standardized moment |
| Excess kurtosis | $0$ | Pearson kurtosis minus $3$ |
Population skewness divides the average cubed distance from $\mu$ by $\sigma^3$. Call this measure $\gamma_1$.
$$ \gamma_1 = \frac{\frac{1}{n}\sum_{i=1}^{n}(r_i-\mu)^3}{\sigma^3} $$
For sample observations, use $\bar{r}$ and $s$ instead of $\mu$ and $\sigma$. The sample standard deviation $s$ uses the $n-1$ denominator, and sample skewness uses the correction shown below. Call it $G_1$.
$$ G_1 = \frac{n}{(n-1)(n-2)} \sum_{i=1}^{n} \left(\frac{r_i-\bar{r}}{s}\right)^3 $$
Population Pearson kurtosis uses the fourth standardized moment. Call it $\beta_2$.
$$ \beta_2 = \frac{1}{n} \sum_{i=1}^{n} \left(\frac{r_i-\mu}{\sigma}\right)^4 $$
For a sample, sample excess kurtosis uses a correction involving $n$, $n-1$, $n-2$, and $n-3$. Call the result $G_2$.
| Applied power | Positive centered return | Negative centered return |
|---|---|---|
| Third power | Positive contribution | Negative contribution |
| Fourth power | Positive contribution | Positive contribution |
$$ \begin{aligned} G_2 &= \frac{n(n+1)}{(n-1)(n-2)(n-3)} \sum_{i=1}^{n} \left(\frac{r_i-\bar{r}}{s}\right)^4 \ &\quad - \frac{3(n-1)^2}{(n-2)(n-3)} \end{aligned} $$
Excess kurtosis shifts Pearson kurtosis so a normal distribution has benchmark $0$ rather than $3$.
$$ \text{Excess kurtosis} = \text{Pearson kurtosis} - 3 $$
The cube means a large positive centered return pushes skewness upward, while a large negative centered return pushes it downward. Positive values indicate a longer right tail, and negative values indicate a longer left tail. The sample correction changes the magnitude, especially when $n$ is small. Because the numerator and denominator use matching powers, the final measure is dimensionless.
Kurtosis gives no tail direction because fourth powers are positive for either sign. Pearson kurtosis above $3$, or excess kurtosis above $0$, indicates a higher fourth standardized moment than the normal benchmark. Values below those benchmarks indicate a lower one. Keep one periodicity throughout and do not silently convert monthly percentage points into annualized decimal returns. Outliers can dominate the third and fourth moments, so a descriptive magnitude is not statistical or economic significance.
When raw observations arrive, move through the same checks each time.
Loading diagram…
The sign is easier to retain as a shape. A symmetric distribution has balanced tails and skewness at the normal benchmark of zero. When the right tail stretches farther, positive skewness records that direction; when the left tail stretches farther, the value is negative. Read the plotted shape as a description of observed returns, then use the moment calculation and its stated sample or population convention to quantify it.
Worked example
You are handed $5$ monthly hedge-fund returns from the investor perspective. Positive returns are gains and negative returns are losses. The observations are a sample, and the exam asks for sample skewness, sample excess kurtosis, and a brief interpretation.
| Given | Value |
|---|---|
| Monthly returns | $-10.00$, $-5.00$, $0.00$, $5.00$, $20.00$ percentage points |
| Observations | $5$ monthly observations |
| Frequency | Monthly |
| Convention | Sample, investor perspective |
| Sample standard deviation | $11.5109$ percentage points per month |
The line follows the return observations from left to right. Read each point as one monthly return, with gains above zero and losses below it. The final observation at 20.00 percentage points extends farther on the gain side than the other returns extend on the loss side. That shape suggests positive skewness, but the calculation uses all five centered returns and the sample correction. The chart helps you anticipate the sign; it does not replace the numerical work or determine kurtosis by itself.
Loading diagram…
- First find the sample center because every central moment is measured from it. Use the following calculation.
$$ \begin{aligned} \bar{r} &= \frac{-10.00+(-5.00)+0.00+5.00+20.00}{5} \ &= 2.0000 \end{aligned} $$
- Next subtract the sample center from every return because skewness uses centered observations. The cubed deviation total is calculated below.
$$ \begin{aligned} \sum_{i=1}^{5}(r_i-\bar{r})^3 &= (-12.0000)^3+(-7.0000)^3+(-2.0000)^3 \ &\quad +(3.0000)^3+(18.0000)^3 \ &= 3,780.0000 \end{aligned} $$
- Use the same centered distances for kurtosis because the fourth moment raises each distance to the fourth power. The fourth-deviation total is calculated below.
$$ \sum_{i=1}^{5}(r_i-\bar{r})^4 = 81,904.0000 $$
- Apply the sample skewness correction because the observations are a sample. Substitute the cubed total and the displayed sample standard deviation.
$$ \begin{aligned} G_1 &= \frac{5}{(5-1)(5-2)} \times \frac{3,780.0000}{(11.5109)^3} \ &= 1.0327 \end{aligned} $$
- Apply the corrected sample excess kurtosis formula. This keeps the answer on the excess scale, where the normal benchmark is $0$.
$$ \begin{aligned} G_2 &= \frac{5(5+1)}{(5-1)(5-2)(5-3)} \times \frac{81,904.0000}{(11.5109)^4} \ &\quad - \frac{3(5-1)^2}{(5-2)(5-3)} \ &= -2.1685 \end{aligned} $$
- Convert to Pearson kurtosis only if the question asks for that convention.
$$ \begin{aligned} \text{Pearson kurtosis} &= -2.1685+3 \ &= 0.8315 \end{aligned} $$
The positive sample skewness points to a longer gain-side tail, while the below-normal kurtosis readings describe shape only and do not establish statistical or economic significance.
Changed condition
Keep the same monthly setup, but replace the final return $20.00$ with $-25.00$. This changes the right-tail observation into a left-tail observation. Before calculating, predict a lower mean and negative skewness, then check how the fourth-moment measure moves under the sample convention.
| Measure | Original | Changed final return |
|---|---|---|
| Mean return | $2.0000$ | $-7.0000$ |
| Sample skewness | $1.0327$ | $-1.0327$ |
| Sample excess kurtosis | $-2.1685$ | $-13.8315$ |
The mean moves down, and the odd third moment changes sign, so the skewness direction reverses. The fourth-moment reading moves sharply under this changed return, which is why you check the convention, periodicity, sample size, and outlier sensitivity before drawing a conclusion.
Before reading on, calculate the sample skewness for the changed return set.
Common error
When the question asks for sample excess kurtosis, you might use the population denominator or report Pearson kurtosis. That choice feels natural because the uncorrected moment is the direct calculation and Pearson kurtosis is the familiar fourth-moment label. If the question states a sample convention or gives the normal benchmark of $0$ for excess kurtosis, use the small-sample correction and subtract $3$ instead of reporting Pearson kurtosis.
Calculator
For the baseline sample skewness, key the count, cubed-deviation sum, and sample standard deviation first. Then apply the correction and check the display.
| Keys | Display |
|---|---|
| 2ND CLR TVM | 0.0000 |
| 5 N | 5.0000 |
| 3780 | 3,780.0000 |
| 11.5108644332 | 11.5109 |
| CPT G1 | 1.0327 |
Go deeper
Descriptive tail language tells you what the observed distribution looks like. It does not ask you to make an inferential rejection decision. Describe the observed shape, then evaluate whether the description fits the convention and consider periodicity, sample size, and sensitivity to outliers.
Check yourself
Practice
The changed return set has sample skewness -1.0327. Which interpretation follows?
Put the evaluation steps in order.
- Identify the monthly periodicity
- Identify the sample convention
- Calculate centered moments
- Apply sample correction
- Compare with normal benchmarks
- Interpret tails and outliers
Revision snapshot
Skewness equals the third central moment divided by standard deviation cubed. Positive values indicate a longer right tail and negative values indicate a longer left tail. Sample skewness uses the small-sample correction $\frac{n}{(n-1)(n-2)}$ multiplied by the sum of cubed standardized deviations. Pearson kurtosis is the fourth standardized moment, and a normal distribution has Pearson kurtosis $3$. Excess kurtosis equals Pearson kurtosis minus $3$, and a normal distribution has excess kurtosis $0$. Evaluate the convention, periodicity, sample size, and outlier sensitivity. Descriptive magnitude is not statistical or economic significance. The trap is using the population denominator or reporting Pearson kurtosis when sample excess kurtosis is requested.
Unlock the full lesson and continue reading
Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more