Effective duration of a callable or putable bond

Effective duration of a callable or putable bond

Published September 28, 2026

Effective duration of a callable or putable bond

On this page

Learning Outcome Statement

Calculate and interpret effective duration of a callable or putable bond.

On the exam: The case gives you the current dirty price, dirty model prices after equal upward and downward parallel yield-curve shifts, and the shift convention. Start with the current dirty price, $P_0$. Compare it with the model's dirty price after rates fall, $P_{\text{down}}$, and after rates rise by the same decimal shift, $\Delta y$, $P_{\text{up}}$. The option can change which cash flows remain: when rates fall, the issuer can call a callable bond, capping the investor's price gain, while when rates rise, the investor can exercise a put on a putable bond and cushion the price loss.

ItemConventionSymbol or value
Current priceDirty, includes accrued interest$P_0$
Scenario pricesDirty model outputs$P_{\text{down}}$, $P_{\text{up}}$
Clean priceExcludes accrued interestDirty price less accrual
SettlementImmediately after last coupon dateAccrued interest supplied
Yield basisAnnual periodic compoundingOne period per year
Curve moveEqual parallel shift$\Delta y$ as decimal
Price scalePer 100 of parInvestor perspective

Use dirty prices for the current bond and both model scenarios. Clean price helps you check the quote, while annual periodic compounding with one period per year supplies the rate convention and the same decimal $\Delta y$ moves the whole curve in either direction.

Effective duration, $D_{\mathrm{eff}}$, converts the two-sided price response into an approximate percentage response per unit of decimal yield change. The formula below makes that comparison.

$$ D_{\mathrm{eff}}=\frac{P_{\text{down}}-P_{\text{up}}}{2\times P_0\times\Delta y} $$

The numerator captures the price difference between opposite curve moves. A larger difference raises duration. The denominator scales the difference by current dirty price and the full two-direction shift, so a larger $P_0$ or $\Delta y$ lowers the result when scenario prices are held fixed. Read $D_{\mathrm{eff}}$ as the approximate percentage price change for a small parallel curve move, with price moving opposite to yields. The model's exercise choice is already reflected in those scenario prices, so a putable bond uses the same formula after the investor's optimal put decision.

Treat the exercise decision as part of the model price, not as an adjustment made after duration. Use this sequence when the case supplies model prices. The earlier price-response visual shows the two-sided comparison behind the measure: falling rates raise price and rising rates lower it. The option changes the size of each move because exercise can alter the cash flows. Keep that relationship in mind as you trace the order here, from applying the curve shift, through the exercise decision, to reading dirty prices and interpreting duration.

Loading diagram…

Worked example

You are handed a callable bond immediately after its last coupon date. Its current quote includes accrued interest, and an arbitrage-free model gives dirty prices after equal curve shifts with optimal call exercise. You need the effective duration and a decision-useful interpretation.

GivenValue
Current dirty priceUSD 101.2 per 100 par
Accrued interestUSD 0.4 per 100 par
Parallel curve shift0.01 decimal per year
Down-rate straight priceUSD 104 per 100 par
Down-rate embedded effectUSD -0.9 per 100 par
Up-rate straight priceUSD 98.8 per 100 par
Up-rate embedded effectUSD 0 per 100 par
Wider down-rate inputsUSD 106 straight, USD -1.5 effect
Wider up-rate inputsUSD 96.6 straight, USD 0 effect
Model basisDirty prices with optimal call exercise
Clean quote checkUSD 100.80 per 100 par
Down-rate model priceUSD 103.10 per 100 par
Up-rate model priceUSD 98.80 per 100 par
Two-sided numeratorUSD 4.30 per 100 par
Duration denominatorUSD 2.02
Effective duration2.1245

The line below uses the wider-shift inputs to show how the callable dirty price changes across curve moves. The horizontal values are percentage points, while the vertical values are USD per 100 par. Compare the two sides of the curve around the current price: the downward shift produces a smaller gain than the upward shift produces as a loss, reflecting the call cap. The next values let you read those plotted points precisely. Keep the shift labels in percentage points distinct from the decimal shift used in the duration denominator.

Loading diagram…

Read the plotted line from the center outward. The current callable dirty price is USD 101.20 per 100 par; a one-point fall takes it to USD 103.10, while a one-point rise takes it to USD 98.80. At two points, the corresponding prices are USD 104.50 and USD 96.60. This shape makes the limited upside visible, and the listed values make each scenario easy to verify against the model inputs.

Curve shiftCallable dirty price
-2 percentage pointsUSD 104.50 per 100 par
-1 percentage pointUSD 103.10 per 100 par
0 percentage pointsUSD 101.20 per 100 par
1 percentage pointUSD 98.80 per 100 par
2 percentage pointsUSD 96.60 per 100 par
  1. Check the quote basis before using the risk measure. Subtract accrued interest from the current dirty price to verify the clean quote. The calculation $101.2-0.4$ produces USD 100.80 per 100 par, but keep USD 101.2 as $P_0$.

  2. Build each stated-shift model price by adding the embedded effect to the straight price. The down-rate calculation $104+(-0.9)$ produces USD 103.10. The up-rate calculation $98.8+0$ produces USD 98.80.

  3. Subtract the up-rate price from the down-rate price because the formula captures the two-sided response. The numerator $103.10-98.80$ produces USD 4.30.

  4. Scale the current dirty price by the decimal shift and the two-direction factor. The displayed denominator from $2\times101.2\times0.01$ is USD 2.02. The calculator keeps underlying precision for the final division.

  5. Divide the numerator by that denominator. The model calculation produces $D_{\mathrm{eff}}=2.1245$.

For the stated parallel shift, an upward move implies an approximate price decline of 2.1245%, while the callable feature limits the corresponding gain when the curve falls.

Changed condition

MeasureBeforeAfter
Down-rate embedded effectUSD -0.9USD -1.4
Down-rate dirty priceUSD 103.10USD 102.60
Effective duration2.12451.8775

Predict the direction before looking at the right column. The more negative down-rate effect lowers the down-rate dirty price while the up-rate price stays fixed, so the numerator shrinks and the unchanged denominator pulls effective duration lower. Before reading on, calculate the changed-case numerator yourself from the two scenario prices.

Common error

You may insert the clean price or a percentage-point value such as $1$ instead of the decimal curve shift $0.01$. You may also mix the clean price for $P_0$ with dirty scenario prices. The error feels right because the bond quote may be shown clean, and a percentage point looks like the stated shift. It gives itself away when your duration is one hundred times too small or when you put clean $P_0$ beside dirty scenario prices.

Calculator

KeysDisplay
101.2 STO 1101.20
0.01 STO 20.01
103.1 STO 3103.10
98.8 STO 498.80
RCL 3 - RCL 4 = STO 54.30
2 × RCL 1 × RCL 2 =2.02
RCL 5 ÷ (2 × RCL 1 × RCL 2) =2.1245

The first calculation stores the original down-rate and up-rate prices, subtracts them to get USD 4.30, then divides by the denominator of USD 2.02. For the changed condition, replace only the down-rate price with USD 102.60. The up-rate price and denominator stay fixed, so the numerator becomes USD 3.80 and the resulting duration falls.

KeysDisplay
101.2 STO 1101.20
0.01 STO 20.01
102.6 STO 3102.60
98.8 STO 498.80
RCL 3 - RCL 4 = STO 53.80
2 × RCL 1 × RCL 2 =2.02
RCL 5 ÷ (2 × RCL 1 × RCL 2) =1.8775

Check yourself

Practice

An investor holds a callable bond with current dirty price USD 101.2 per 100 par. An arbitrage-free model gives USD 103.10 after the down-rate shift and USD 98.80 after the up-rate shift. The equal curve shift is 0.01 decimal per year. Accrued interest is USD 0.4 per 100 par.

Question 1

Calculate the bond's effective duration.

Question 2

For the callable bond in this case, which statement is correct when rates fall?

Question 3

What is the clean price?

Question 4

What does an effective duration of 2.1245 imply for a small parallel rise in the curve?

The down-rate embedded effect changes from USD -0.9 to USD -1.4. The down-rate dirty price becomes USD 102.60, while the up-rate price remains USD 98.80. Which outcome follows?

Revision snapshot

Use this expression for effective duration.

$$ D_{\mathrm{eff}}=\frac{P_{\text{down}}-P_{\text{up}}}{2\times P_0\times\Delta y} $$

Use dirty prices and enter the parallel yield-curve shift as a decimal. A callable bond's price gain when rates fall can be capped by call exercise. A putable bond's price loss when rates rise can be cushioned by the put. Interpret effective duration as the approximate percentage price change for a small parallel curve move, with price moving opposite to yields. The exam supplies current and scenario dirty prices from an arbitrage-free model and asks for the measure and its interpretation. A percentage-point denominator or mixed clean and dirty prices can make duration far too small.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: Effective duration of a callable or putable bond

  1. 1. A bond has modified duration of 4.8 and convexity of 32. If its yield rises by 50 basis points, the estimated percentage price change is closest to:

    • A. −2.36%
    • B. −2.40%
    • C. −2.44%
    Show answer

    Answer: A. −2.36%

    > Key point: Estimate a bond’s percentage price change by adding the convexity adjustment to the duration effect. Why −2.36% is correct - The yield change is 50 basis points = 0.005. Duration effect: −4.8 × 0.005 = −0.024. - Convexity adjustment: ½ × 32 × 0.005² = +0.0004. Total: −0.0236 = −2.36%. Working | Step | Working | Result | |---|---|---| | Duration effect | −4.8 × 0.005 | −0.024 | | Convexity adjustment | ½ × 32 × 0.005² | +0.0004 | | Estimated price change | −0.024 + 0.0004 | −2.36% | Answer: −2.36% Why the other options are wrong - −2.40%: This is the duration-only estimate; it omits the positive convexity adjustment. - −2.44%: This subtracts the convexity adjustment, rather than adding it.

  2. 2. Immediately after a coupon reset, a floating-rate note trades below par with unchanged issuer credit quality. This price is most likely explained by:

    • A. The reference rate is expected to decline
    • B. The quoted margin is below the required margin
    • C. The next coupon has already been fixed above market
    Show answer

    Answer: B. The quoted margin is below the required margin

    > Key point: Immediately after reset, a floating-rate note trades below par when its quoted margin is below the margin investors require. Why the quoted margin is below the required margin is correct - The reset aligns the reference-rate component of the coupon with current rates. - If the quoted margin is below the required margin, the note’s return is too low at par, so its price falls below par. How they compare | Explanation | Price implication | |---|---| | Quoted margin below required margin | Below par | | Reference rate expected to decline | Does not by itself explain the discount immediately after reset | | Next coupon fixed above market | Supports a higher price, not a discount | Why the other options are wrong - The reference rate is expected to decline: Future coupons adjust with the reference rate; this expectation alone does not explain a discount immediately after reset. - The next coupon has already been fixed above market: An above-market coupon supports the price rather than pushing it below par.

  3. 3. An issuer may redeem a bond early at the present value of remaining cash flows discounted at a government yield plus a fixed spread. The feature is best described as:

    • A. A standard call provision
    • B. A make-whole call provision
    • C. A sinking fund provision
    Show answer

    Answer: B. A make-whole call provision

    > Key point: A make-whole call sets the early redemption price using the present value of remaining cash flows discounted at a benchmark yield plus a spread. Why A make-whole call provision is correct - The redemption price is calculated from the bond’s remaining cash flows using a government yield plus a fixed spread. - That benchmark-based present-value calculation identifies a make-whole call. How they compare | Provision | Defining feature | |---|---| | Make-whole call | Present value of remaining cash flows, discounted at a benchmark yield plus a spread | | Standard call | Specified call dates and prices | | Sinking fund | Scheduled retirement of bond principal | Why the other options are wrong - A standard call provision: It uses stated call dates and prices, not the specified present-value calculation. - A sinking fund provision: It provides for scheduled principal retirement, not this early-redemption pricing method.

  4. 4. An issuer replaces a fixed-price call with a make-whole call based on a government yield plus a fixed spread. For investors, the new provision most likely creates:

    • A. Lower reinvestment risk because the call price rises when benchmark yields decline
    • B. Equal reinvestment risk because both provisions permit redemption before maturity
    • C. Higher reinvestment risk because the issuer can redeem at a fixed price
    Show answer

    Answer: A. Lower reinvestment risk because the call price rises when benchmark yields decline

    > Key point: A make-whole price rises as benchmark yields fall, making early redemption less attractive and reducing investors’ reinvestment risk. Why Lower reinvestment risk because the call price rises when benchmark yields decline is correct - The make-whole price is based on remaining payments discounted at a government yield plus a fixed spread. - When the benchmark yield falls, the redemption price rises, reducing the issuer’s incentive to call the bond when investors would otherwise face lower-yield reinvestment. How they compare | Provision | Price when yields fall | Reinvestment risk | |---|---|---| | Make-whole call | Rises | Lower | | Fixed-price call | Remains fixed | Higher | Why the other options are wrong - Equal reinvestment risk because both provisions permit redemption before maturity: Early redemption alone does not determine risk; the call price affects the issuer’s incentive to redeem. - Higher reinvestment risk because the issuer can redeem at a fixed price: The new provision is yield-based, not fixed-price, and its price rises as benchmark yields fall.

  5. 5. A frequent corporate issuer establishes a shelf registration for future bond financing. This arrangement most likely allows the issuer to:

    • A. Sell multiple bond issues from one registration over time
    • B. Avoid providing required disclosures to prospective investors
    • C. Guarantee that every issue receives a firm-commitment underwriting
    Show answer

    Answer: A. Sell multiple bond issues from one registration over time

    > Key point: Shelf registration lets an issuer sell multiple offerings under one registration over time. Why selling multiple bond issues is correct - The issuer registers securities in advance and can offer portions separately over time. - This gives a frequent issuer flexibility to time offerings to financing needs and market conditions. How they compare | Claim | What shelf registration provides | |---|---| | Multiple issues over time | Yes; offerings can be made from one registration. | | Avoid required disclosures | No; disclosure requirements still apply. | | Guaranteed firm commitment | No; registration does not determine the underwriting arrangement. | Why the other options are wrong - Avoid providing required disclosures to prospective investors: Shelf registration changes timing and flexibility, not disclosure obligations. - Guarantee that every issue receives a firm-commitment underwriting: It does not guarantee an underwriting arrangement for any issue.

  6. 6. A treasurer wants an issue that contractually repays principal in scheduled installments before maturity, reducing the amount due on the final date. The most appropriate structure is a:

    • A. Amortizing bond
    • B. Bullet bond
    • C. Perpetual bond
    Show answer

    Answer: A. Amortizing bond

    > Key point: An amortizing bond repays principal in scheduled installments before maturity, reducing the final payment. Why Amortizing bond is correct - Its scheduled principal repayments reduce the outstanding balance before maturity. - This meets the treasurer’s goal of reducing the principal due on the final date. How they compare | Structure | Principal repayment | |---|---| | Amortizing bond | Scheduled installments before maturity | | Bullet bond | Generally at maturity | | Perpetual bond | No stated maturity | Why the other options are wrong - Bullet bond: Principal is generally repaid at maturity, rather than in scheduled installments beforehand. - Perpetual bond: It has no stated maturity date and does not provide the specified pre-maturity repayment schedule.

  7. 7. An investor seeking protection against a substantial rise in required yields should most appropriately select:

    • A. A putable bond
    • B. A callable bond
    • C. An option-free bond
    Show answer

    Answer: A. A putable bond

    > Key point: A putable bond gives the investor a right to sell the bond back, limiting losses when required yields rise. Why A putable bond is correct - The investor can exercise the put at the specified price when rising yields depress the bond’s market value. - This investor-owned right limits downside relative to an otherwise similar bond without a put. How they compare | Bond type | Investor protection when yields rise | |---|---| | Putable bond | Put right limits downside | | Callable bond | Issuer’s call limits investor upside when yields fall | | Option-free bond | No embedded put; price remains exposed to declines | Why the other options are wrong - A callable bond: The issuer—not the investor—has the call right, which primarily limits upside when yields fall. - An option-free bond: It has no investor put to limit losses as required yields rise.

Flashcards: Effective duration of a callable or putable bond

  1. 1. What happens to the effective duration of a callable and putable bond as interest rates increase?

    Show answer

    increases / decreases

  2. 2. Effective duration =

    Show answer

    (BV- - BV+) / 2BV0Δy

  3. 3. If bond A and B are of the same credit quality but bond A offers a lower OAS, is bond A overpriced or underpriced?

    Show answer

    overpriced

  4. 4. How is the market conversion price affected by a stock split?

    Show answer

    reduced by half

  5. 5. What is a bond with an embedded soft put redeemable through?

    Show answer

    issuance of cash, subordinated notes, common stock or any combination of the three

  6. 6. For a convertible bond with a call provision, with respect to the bond's convertibility feature and the call feature, the Black-Scholes option model can apply to:

    Show answer

    only one feature - applies to convertibility feature - Not appropriate for call because can't assume volatility constant

  7. 7. What compensation does the Z-spread reflect?

    Show answer

    option, credit and liquidity risk

  8. 8. What is a bond with an embedded hard put redeemable through?

    Show answer

    cash only

  9. 9. A long callable bond can be replicated using...

    Show answer

    a long option-free bond plus a short receiver swaption

  10. 10. Option free bonds will have a \\\\ duration than the duration of a callable bond under a rising interest rate environment.

    Show answer

    higher

Everything you need for CFA prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF