Credit ratios: leverage and coverage

Credit ratios: leverage and coverage

Published September 28, 2026

Credit ratios: leverage and coverage

On this page

Learning Outcome Statement

Calculate and interpret financial ratios used in credit analysis.

On the exam: The question gives total debt, cash, EBITDA, depreciation, interest expense, and principal repayment, then asks for leverage or coverage ratios and their credit-risk interpretation in a selected-response, fill-in, ordered-response, or matrix format.

A credit analyst is asking about borrowing and repayment capacity. Leverage puts debt against EBITDA, while coverage puts earnings over interest or total debt service. You care because the same debt becomes harder to carry when earnings fall.

EBITDA is earnings before interest, taxes, depreciation, and amortization. EBIT removes depreciation from EBITDA, so depreciation matters when interest coverage is requested. Net leverage gives cash credit against debt, while gross leverage uses total debt.

RatioNumeratorDenominator
Gross leverageTotal debtEBITDA
Net leverageTotal debt minus cashEBITDA
Interest coverageEBITInterest expense
Debt-service coverageEBITDAInterest expense plus principal repayment

Leverage has debt in the numerator, so more debt raises the ratio and more EBITDA lowers it. Coverage has earnings in the numerator, so stronger earnings raise the ratio and larger obligations lower it.

$$ \begin{aligned} \text{Gross leverage} &= \frac{\text{total debt}}{\text{EBITDA}} \ \text{Net leverage} &= \frac{\text{total debt} - \text{cash}}{\text{EBITDA}} \ \text{Interest coverage} &= \frac{\text{EBIT}}{\text{interest expense}} \ \text{Debt-service coverage} &= \frac{\text{EBITDA}}{\text{interest expense}+\text{principal repayment}} \end{aligned} $$

Gross leverage measures debt before cash, while net leverage subtracts cash first, so cash lowers the net numerator. Interest coverage uses EBIT because depreciation has been deducted, while debt-service coverage uses EBITDA and adds principal repayment to interest expense, making the denominator larger. Each result is expressed as times. Higher leverage and lower coverage generally indicate greater credit risk, so compare ratios with peers, trends, and covenants.

Loading diagram…

Worked example

You are handed an annual set of figures for a corporate borrower. You need to calculate gross leverage, net leverage, interest coverage, and debt-service coverage, then interpret the direction for a lender. Debt and cash are measured at the same date, and interest expense and principal repayment are positive obligations.

InputValue
Total debtUSD 500 million
CashUSD 60 million
EBITDAUSD 300 million per year
DepreciationUSD 60 million per year
Interest expenseUSD 30 million per year
Principal repaymentUSD 40 million per year

Read the inputs by role before calculating. Debt and cash set the two leverage numerators, while EBITDA supplies their shared denominator. Depreciation converts EBITDA to EBIT for interest coverage. Interest expense appears in both coverage calculations, but principal repayment joins it only for debt-service coverage. Keeping these relationships straight helps you select the right figures before dividing.

  1. Subtract cash from total debt because net leverage gives cash credit against borrowing. The result is $500 - 60 = 440.00$ USD million, which is net debt.

  2. Divide total debt by EBITDA for gross leverage because this measure keeps the gross debt numerator. The result is $\frac{500}{300} = 1.67$ times.

  3. Divide net debt by EBITDA because net leverage recognizes cash. The result is $\frac{440.00}{300} = 1.47$ times.

  4. Subtract depreciation from EBITDA because interest coverage uses EBIT. The result is $300 - 60 = 240.0000$ USD million per year.

  5. Divide EBIT by interest expense because this asks how many times operating earnings meet interest. The result is $\frac{240.0000}{30} = 8.00$ times.

  6. Add interest expense and principal repayment because both are debt-service obligations. The result is $30 + 40 = 70.0000$ USD million per year.

  7. Divide EBITDA by total debt service because the numerator must show earnings available for the obligation. The result is $\frac{300}{70.0000} = 4.29$ times.

Taken together, these ratios give a baseline for the lender, but the credit decision still depends on whether leverage is high or coverage is low relative to peers, trends, and covenants.

Changed condition

The downturn case changes only EBITDA. Debt, cash, depreciation, interest expense, and principal repayment stay unchanged.

MeasureBaseDownturn
EBITDAUSD 300 million per yearUSD 240 million per year
LeverageGross 1.67, net 1.47 timesGross 2.08, net 1.83 times
CoverageInterest coverage 8.00, debt-service coverage 4.29 timesInterest coverage 6.00, debt-service coverage 3.43 times

Predict the direction before reading the entries. A smaller EBITDA denominator makes both leverage ratios rise, while unchanged depreciation makes EBIT fall and lowers interest coverage. Debt service stays fixed, so the lower EBITDA numerator also lowers debt-service coverage. Before reading on, calculate the downturn ratios yourself.

Common error

You may divide debt service by EBITDA because the borrower's obligation feels like the numerator. That choice feels right because the borrower must make the payment. But a coverage ratio asks whether the company's earnings cover that obligation, so EBITDA is the numerator and higher coverage is stronger.

Check yourself

Practice

A borrower has total debt of USD 500 million, cash of USD 60 million, and EBITDA of USD 300 million. What is net leverage?

Revision snapshot

RatioFormula
Gross leverage$\text{Gross leverage} = \frac{\text{total debt}}{\text{EBITDA}}$
Net leverage$\text{Net leverage} = \frac{\left(\text{total debt} - \text{cash}\right)}{\text{EBITDA}}$
Interest coverage$\text{Interest coverage} = \frac{\text{EBIT}}{\text{interest expense}}$
Debt-service coverage$\text{Debt-service coverage} = \frac{\text{EBITDA}}{\text{interest expense}+\text{principal repayment}}$

Higher leverage and lower coverage generally indicate greater credit risk. Interpret ratios relative to peers, trends, and covenants. The trap is reversing coverage. Earnings belong in the numerator because the question asks whether earnings cover an obligation, so higher coverage is stronger. On the exam, use the given debt, cash, EBITDA, depreciation, interest expense, and principal repayment, then calculate and interpret the requested ratios.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: Credit ratios: leverage and coverage

  1. 1. An issuer wants public distribution but requires its investment bank to act only as agent and not purchase unsold bonds. The most appropriate issuance method is:

    • A. A firm-commitment offering
    • B. A best-efforts offering
    • C. A private placement
    Show answer

    Answer: B. A best-efforts offering

    > Key point: A best-efforts offering lets the bank act as selling agent without buying unsold bonds. Why A best-efforts offering is correct - The issuer wants public distribution while limiting the bank to acting as agent. - In a best-efforts offering, the bank sells the bonds but does not purchase any that remain unsold. How they compare | Method | Distribution and bank’s role | |---|---| | Best-efforts offering | Public sale; bank acts as agent and does not buy unsold bonds | | Firm-commitment offering | Bank purchases the issue and bears the risk of unsold bonds | | Private placement | Sale to a limited group, not public distribution | Why the other options are wrong - A firm-commitment offering: the bank buys the bonds from the issuer, contrary to the requirement that it act only as agent. - A private placement: it does not provide the public distribution the issuer wants.

  2. 2. An issuer wants flexibility to redeem a bond before maturity while compensating investors using the present value of remaining cash flows discounted at a government benchmark plus a stated spread. The feature is most likely:

    • A. A make-whole call
    • B. A sinking-fund provision
    • C. A regular call provision
    Show answer

    Answer: A. A make-whole call

    > Key point: A make-whole call prices early redemption using the present value of remaining cash flows discounted at a benchmark rate plus a spread. Why A make-whole call is correct - The stated present-value method and government benchmark plus spread identify a make-whole call. - It allows the issuer to redeem the bond before maturity while compensating investors for the remaining cash flows. How they compare | Feature | Redemption method | |---|---| | A make-whole call | Present value of remaining cash flows, discounted at benchmark plus spread | | A sinking-fund provision | Scheduled retirement of principal | | A regular call provision | Early redemption at a stated call price | Why the other options are wrong - A sinking-fund provision: Provides for scheduled principal retirement, not the specified present-value redemption. - A regular call provision: Allows early redemption, but uses a stated call price rather than the described calculation.

  3. 3. A frequent corporate issuer wants authority to offer multiple bond tranches over time without filing a separate registration for each offering. The most appropriate issuance method is:

    • A. A shelf registration
    • B. A private placement
    • C. An auction issuance
    Show answer

    Answer: A. A shelf registration

    > Key point: Shelf registration lets a frequent issuer register securities in advance and offer bond tranches over time. Why A shelf registration is correct - It provides advance registration authority, so the issuer need not file a separate registration for each offering. - The issuer can offer tranches over time as market conditions change. Why the other options are wrong - A private placement: It sells securities to a limited group of eligible investors; it does not provide the requested advance registration flexibility. - An auction issuance: It determines pricing and allocation for an issuance, not continuing registration authority.

  4. 4. A fixed-rate, option-free bond trades at a premium and is redeemable at par. The relationship among its yield measures is most likely:

    • A. Coupon rate > current yield > yield to maturity
    • B. Current yield > coupon rate > yield to maturity
    • C. Yield to maturity > current yield > coupon rate
    Show answer

    Answer: A. Coupon rate > current yield > yield to maturity

    > Key point: For a premium bond redeemable at par, coupon rate > current yield > yield to maturity. Why Coupon rate > current yield > yield to maturity is correct - The bond’s price is above par, so the coupon divided by price (current yield) is below the coupon divided by par (coupon rate). - Redemption at par means the investor loses the premium by maturity, lowering yield to maturity below current yield. Why the other options are wrong - Current yield > coupon rate > yield to maturity: Current yield is lower than the coupon rate because its denominator is the above-par price. - Yield to maturity > current yield > coupon rate: This is the discount-bond ordering; a premium bond’s current yield is below its coupon rate, and the premium loss reduces yield to maturity.

  5. 5. An investor in a government securities auction prioritizes receiving an allocation and accepts the auction-determined yield. The investor should most likely:

    • A. Purchase only after secondary-market trading begins
    • B. Submit a noncompetitive bid
    • C. Submit a competitive bid below the expected yield
    Show answer

    Answer: B. Submit a noncompetitive bid

    > Key point: A noncompetitive bid accepts the auction-determined yield and prioritizes receiving an allocation, subject to auction limits. Why a noncompetitive bid is correct - The investor accepts the yield set by the auction rather than specifying one. - This matches the priority of receiving an allocation, subject to auction limits. How they compare | Approach | Yield | Allocation fit | |---|---|---| | Noncompetitive bid | Accepts auction yield | Prioritizes allocation | | Competitive bid | Specifies a yield | May be rejected | | Secondary-market purchase | Set by market trading | No auction allocation | Why the other options are wrong - Submit a competitive bid below the expected yield: It specifies a yield and may be rejected if that yield is not accepted. - Purchase only after secondary-market trading begins: It does not secure an auction allocation, and the purchase yield depends on market trading.

  6. 6. An issuer wants early-redemption flexibility while offering investors protection against redemption solely to refinance after rates fall. The most appropriate feature is:

    • A. A make-whole call provision
    • B. A sinking-fund provision
    • C. An investor put provision
    Show answer

    Answer: A. A make-whole call provision

    > Key point: A make-whole call lets the issuer redeem early while requiring compensation that can discourage refinancing after rates fall. Why A make-whole call provision is correct - It gives the issuer early-redemption flexibility. - The redemption price reflects the present value of remaining payments; when rates fall, that value generally rises, making a refinancing call less attractive. How they compare | Provision | Who controls early repayment? | Main feature | |---|---|---| | Make-whole call | Issuer | Early call with make-whole compensation | | Sinking fund | Scheduled | Principal repaid on a schedule | | Investor put | Investor | Investor can demand early redemption | Why the other options are wrong - A sinking-fund provision: Scheduled principal repayment does not give the issuer the same choice to call early or specifically protect investors from a refinancing call. - An investor put provision: It gives early-redemption control to investors, not the issuer.

  7. 7. An investor prioritizes receiving government securities at auction over controlling the awarded yield. The investor should most likely:

    • A. Submit a noncompetitive bid
    • B. Submit a competitive bid below market yield
    • C. Purchase only in the secondary market
    Show answer

    Answer: A. Submit a noncompetitive bid

    > Key point: A noncompetitive bid prioritizes receiving securities at auction by accepting the yield determined there. Why Submit a noncompetitive bid is correct - The investor accepts the auction-determined yield rather than specifying one. - Subject to auction limits, this matches the priority of receiving an award over controlling its yield. How they compare | Approach | At auction? | Yield control | Fit with priority | |---|---|---|---| | Noncompetitive bid | Yes | Accepts auction yield | Best fit | | Competitive bid below market yield | Yes | Specifies acceptable yield | No award assurance | | Secondary-market purchase | No | Not an auction bid | Not at auction | Why the other options are wrong - Submit a competitive bid below market yield: It specifies a yield and does not provide the award assurance of a noncompetitive bid. - Purchase only in the secondary market: It does not obtain securities at auction.

  8. 8. A 6% semiannual coupon bond has a clean price of 98.40 per 100 of par. Settlement is 60 days into a 180-day coupon period using actual/actual. The full price is closest to:

    • A. 98.40
    • B. 99.40
    • C. 100.40
    Show answer

    Answer: B. 99.40

    > Key point: Full price equals clean price plus accrued interest for the elapsed portion of the coupon period. Why 99.40 is correct - The semiannual coupon is 6.00% ÷ 2 = 3.00 per 100 of par. - Accrued interest uses the 60 elapsed days: 3.00 × 60/180 = 1.00. Working | Step | Working | Result | |---|---|---| | Semiannual coupon | 6.00 ÷ 2 | 3.00 per 100 par | | Accrued interest | 3.00 × 60/180 | 1.00 per 100 par | | Full price | 98.40 + 1.00 | 99.40 per 100 par | Answer: 99.40 per 100 of par. Why the other options are wrong - 98.40: This is the clean price; it omits 1.00 per 100 par of accrued interest. - 100.40: Using the 120 remaining days gives 3.00 × 120/180 = 2.00 of accrued interest, producing 98.40 + 2.00 = 100.40 per 100 par.

Flashcards: Credit ratios: leverage and coverage

  1. 1. In corporate credit analysis, what is the standard Coverage ratio and what does a higher value indicate?

    Show answer

    EBIT / interest expense. A higher ratio indicates a greater ability to service debt, implying higher credit quality.

  2. 2. What is a Corporate Credit Rating (issue rating)?

    Show answer

    A rating that reflects the credit risk of a specific debt issue, accounting for its priority of claim (seniority) and specific covenants.

  3. 3. In corporate credit analysis, what is the standard hierarchy of debt seniority (priority of claims) from highest to lowest?

    Show answer

    1\. First lien/mortgage, 2. Senior secured, 3. Junior secured, 4. Senior unsecured, 5. Senior subordinated, 6. Subordinated, 7. Junior subordinated.

  4. 4. In corporate credit analysis, how is Cash Flow from Operating Activities (CFO) defined?

    Show answer

    Net income plus noncash charges minus the increase in working capital. It represents the net cash paid or received in the continuing operations of the business.

  5. 5. In corporate credit ratings, what is an Issue Credit Rating (or Corporate Credit Rating)?

    Show answer

    A rating that reflects the credit risk of a specific debt issue, accounting for its specific seniority ranking, security, and covenants.

  6. 6. In the 5 Cs of credit analysis, what does "Capacity" refer to?

    Show answer

    The borrower's ability to generate sufficient cash flows to make their debt payments on time.

  7. 7. In corporate credit analysis, how is Retained Cash Flow (RCF) defined?

    Show answer

    Operating cash flow minus dividends.

  8. 8. What are the 5 Cs of bottom-up credit analysis?

    Show answer

    Capacity, Capital, Collateral, Covenants, and Character.

  9. 9. In corporate credit analysis, what is "structural subordination"?

    Show answer

    When a subsidiary has outstanding debt with a priority claim on its own cash flows, effectively subordinating the parent company's debt with respect to those subsidiary cash flows.

Everything you need for CFA prep

Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

GET STARTED FOR FREE
75% OFFLimited time offer
GET 75% OFF