The industry and competitive analysis process

The industry and competitive analysis process

Published September 28, 2026

The industry and competitive analysis process

On this page

Learning Outcome Statement

Describe the process of industry and competitive analysis.

On the exam: The question gives a short industry and company fact pattern with macro conditions, competitive-position evidence, forecast assumptions, and valuation inputs. It asks for the correct analysis sequence, model choice, valuation interpretation, sensitivity, or recommendation.

Start with the boundary, not the spreadsheet. Decide which products, customers, geography, and competitors belong in the industry, because an industry growth rate is useful only when its market matches the company. Then move from macroeconomic conditions to industry structure to competitive position, build forecasts, choose a fitting valuation model, and finish with a valuation-backed recommendation.

StageQuestionEvidence
Industry boundaryWhat belongs?Products, customers, geography, competitors
Macroeconomic conditionsWhat moves demand?Economic growth, rates, inflation
Industry structureHow hard is profit?Rivalry, entrants, substitutes, suppliers
Competitive positionCan share persist?Brand, cost, access, share evidence
Forecast and valueWhat reaches equity?Growth, margin, multiple, debt, cash
RecommendationIs price supported?Per-share value, sensitivity, market price

This order prevents a broad market statistic from becoming a company forecast. It also makes the valuation model a consequence of the business analysis, not the starting point.

Industry growth, $g_i$, describes expansion in the defined market. Share gain, $g_s$, describes the company taking demand from rivals. Company growth, $g_c$, is the rate you carry into the revenue forecast.

$$ g_c = g_i + g_s $$

Both terms push company growth in the same direction. A stronger industry or greater share gain raises the forecast. If either assumption falls, the forecast falls, so the result is an assumption to test rather than a certainty.

The boundary is the outer wall of the analysis. The company's position sits inside it, while macro conditions and industry structure shape the assumptions.

Read the boundary as a test of relevance: evidence belongs in the forecast only when it describes the defined market and the company competing within it. The position marker sits inside that market, so share evidence cannot replace an industry view. Macro conditions and industry structure shape the setting; they do not directly state the company's growth. Keep those distinctions in mind as you move from analysis to a forecast.

Use this order when you turn the fact pattern into a forecast.

Loading diagram…

Forecast inputs also determine the valuation model. The sequence separates market conditions from company-specific evidence, then carries the resulting assumptions into forecast and value. This prevents a broad industry statistic from being mistaken for revenue growth and gives sensitivity a clear place before the recommendation. Once the forecast is built, identify whether the model estimates enterprise value, equity value, or cash-flow value; each basis needs a matching input.

Match the value being estimated with the input being multiplied.

ModelValue basisMatching input
EV/EBITDA multipleEnterprise valueNormalized forward EBITDA
Equity multipleEquity valueEquity-level earnings
Discounted cash flowCash-flow valueExplicit cash flows

For this chain, EV/EBITDA fits because the forecast supplies normalized forward EBITDA. Enterprise value comes before debt and cash, so the bridge handles the company's capital structure afterward.

Keep the cases separate when the fact pattern supplies them.

CaseAssumption stanceValuation reading
BaseCentral industry and share viewMain estimate
BullStronger industry or share gainUpside case
BearWeaker industry or share gainDownside case

The base case carries the main recommendation. Bull and bear cases show how much the conclusion depends on industry growth or share gain.

Competitive evidence supports the share-gain and margin assumptions. The horizontal coordinate uses share gain of $0.02$ per year, and the vertical coordinate uses normalized EBITDA margin of $0.2$.

Loading diagram…

The point does not prove the forecast. It tells you what evidence the company must defend against rivals.

Worked example

You are handed a regional coffee chain's latest reported revenue of USD 100 million. Industry growth is 0.06 per year, and the chain expects share gain of 0.02 per year. You need a forward valuation and an investor recommendation against a current market price of USD 16 per share.

InputValue
Latest reported revenueUSD 100 million
Industry growth0.06 per year
Share gain0.02 per year
EBITDA margin0.2 normalized forward
EV/EBITDA multiple8 times, forward
DebtUSD 30 million
CashUSD 10 million
Shares outstanding10 million
Current market priceUSD 16 per share

Use latest reported revenue as the starting reported input. The forecast revenues are forward, while the EBITDA margin is normalized forward and the multiple is forward.

The line chart carries the revenue path. The bar chart carries the valuation bridge.

First trace the revenue calculation from the stated inputs: industry growth and share gain combine into one annual company-growth rate, which compounds from reported revenue. That path supplies the year-three revenue used for normalized EBITDA. Keep the bases aligned as you read the visuals: the revenue series shows the operating forecast, while the valuation calculation applies the forward margin and multiple to its final point.

Loading diagram…

The revenue path makes the forecast horizon visible: each year's amount builds on the prior year's amount using the same company-growth rate. That repeated compounding explains why the final revenue is higher than a one-time addition to the starting figure. Use the endpoint as the base for normalized EBITDA, then follow the separate value bridge to see how operating performance becomes an equity amount.

Loading diagram…

The bridge begins with normalized EBITDA and applies the forward EV/EBITDA multiple to produce enterprise value. Debt then reduces the claim available to common shareholders, while cash increases it. This order explains why enterprise value and equity value differ even when they come from the same operating forecast. The resulting aggregate equity amount still needs a share-count division before it can be compared with the quoted market price on a per-share basis.

ItemValue
Company growth0.0800 per year
Growth factor1.0800
Base revenueUSD 100 million
Year one revenueUSD 108.00 million
Year two revenueUSD 116.64 million
Year three revenueUSD 125.97 million
Normalized EBITDAUSD 25.19 million
Enterprise valueUSD 201.55 million
Debt bridgeUSD -30.00 million
Cash bridgeUSD 10.00 million
Aggregate equity valueUSD 181.55 million
Per-share valueUSD 18.16 per share
Upside (decimal)0.1347
  1. Add industry growth and share gain. The company-growth calculation is $0.06 + 0.02 = 0.0800$ per year. This is the rate used in the forward forecast.

  2. Convert that rate to the growth factor $1.0800$, then apply it repeatedly to latest reported revenue. The forward revenue path appears in the table and forecast chart.

  3. Apply the normalized forward EBITDA margin of $0.2$ to year-three revenue. Call the result normalized forward EBITDA $E_f$. The calculation displays $E_f = 125.97 \times 0.2 = 25.19$ USD million.

  4. Call enterprise value $EV$. Multiply $E_f$ by the forward multiple of $8$. The calculator carries underlying precision and displays aggregate enterprise value of USD 201.55 million.

  5. Subtract debt, $D$, because it is a claim ahead of common equity. Add cash, $C$, because it belongs to equity holders. The aggregate equity value, $V_E$, follows $V_E = EV - D + C$ and displays as USD 181.55 million.

  6. Divide aggregate equity value by shares outstanding, $S$. The per-share formula is $V_P = \frac{V_E}{S}$, and the displayed result is USD 18.16 per share.

  7. Compare $V_P$ with current market price, $P$, of USD 16 per share. Define upside, $u$, as $u = \frac{V_P}{P} - 1$. The base calculation displays upside of $0.1347$.

Because intrinsic per-share value exceeds the market price in the base case, the valuation supports a positive investor recommendation, subject to the sensitivity.

Changed condition

Now change only the industry-growth input. Share gain and every other input stay unchanged.

MeasureBase caseSlower industry
Industry growth0.060.02
Company growth0.08000.0400
Per-share valueUSD 18.16USD 16.00

Predict the direction before reading the output. Lower industry growth reduces company growth from 0.0800 to 0.0400, which pulls the downstream forecast and valuation lower. The unchanged debt and cash bridge does not reverse that direction. Per-share value falls to USD 16.00 and upside becomes -0.0001, so the changed case no longer supports a positive recommendation. Before reading on, recalculate the forward revenue path and state the recommendation.

Common error

A candidate applies an equity multiple directly to enterprise value or treats a single valuation estimate as certain. It feels right because the multiple and the value sit in the same spreadsheet, and one precise output seems easier to recommend. The mismatch between the multiple's numerator and denominator, or a recommendation that ignores the changed industry-growth assumption, gives it away.

Calculator

KeysDisplay
100 × 1.0800 =108.00
× 1.0800 =116.64
× 1.0800 =125.97
× 0.2 =25.19
× 8 =201.55
- 30 + 10 =181.55
÷ 10 =18.16

Check yourself

Practice

Which sequence best follows the process for a company with competitive-position evidence and forecast inputs?

Classify each statement.

AppliesDoes not apply
Industry boundaries come before forecasting
Debt is subtracted and cash is added
A point estimate is certainty

Industry growth plus share gain produces {{slot1}} growth. Enterprise value less debt plus cash produces {{slot2}} equity value. A changed assumption creates a {{slot3}}, not certainty around a point estimate.

Revision snapshot

Define the industry and its boundaries before forecasting. Analyze macroeconomic conditions, industry structure, and competitive positioning. Set company growth with $g_c = g_i + g_s$, and keep base, bull, and bear assumptions separate. Choose a model that matches the business, forecast basis, and capital structure.

Enterprise value less debt plus cash gives aggregate equity value.

$$ V_E = EV - D + C $$

Aggregate equity value divided by shares outstanding gives per-share value.

$$ V_P = \frac{V_E}{S} $$

A point estimate is not certainty. A changed assumption creates a sensitivity. On the exam, check the multiple's numerator against its denominator, aggregate versus per-share units, and whether the recommendation changes when industry growth changes.

Unlock the full lesson and continue reading

Signup to continue reading this lesson and unlimited access questions, flashcards, AI notes, and more

Scan to download app

Scan to download
UNLOCK FREE ACCESS

Practice Questions: The industry and competitive analysis process

  1. 1. An institutional investor owns 1,000 ordinary shares of Ardent Consumer Products, a listed household-products company. At the upcoming annual meeting, shareholders will elect five directors simultaneously using cumulative voting. Each ordinary share carries one vote for each director position, and shareholders may allocate all available votes to one candidate or distribute them among candidates. The institution is considering concentrating all its votes on a single independent director candidate. Ardent also plans a transferable rights offering. Each holder will receive one right for each existing ordinary share. Four rights allow the holder to subscribe for one new ordinary share at USD 20. Immediately before the shares trade ex-rights, the market price is expected to be USD 30. Transaction costs, taxes, and changes in firm value resulting from the use of the offering proceeds may be ignored. All shares issued in the offering will have the same dividend and voting rights as the existing ordinary shares. Separately, an analyst estimates Ardent's expected one-year equity return. Ardent's current share price is USD 30, and its current price-to-earnings multiple is 15.0×. Earnings per share are expected to grow by 5% over the next year. At the end of the year, the analyst expects the price-to-earnings multiple to be 16.0×. A dividend of USD 0.60 per share is expected at year-end. The forecast multiple is applied to next year's earnings, and the investor is assumed to purchase the share today, receive the dividend, and sell the share immediately after the dividend payment. The analyst also reviews a proposed recapitalization under which Ardent would have two common-share classes. Class A would have one vote per share, and Class B would have ten votes per share. Following the recapitalization, 2.0 million Class A shares and 0.4 million Class B shares would be outstanding. Both classes would have identical rights to dividends and liquidation proceeds, so economic ownership is proportional to the number of shares held. The founding family would own all Class B shares, while public investors would own all Class A shares. There would be no voting agreements, convertible securities, or other instruments affecting voting power.

    • 2. Altura Robotics is a publicly traded manufacturer of industrial automation equipment that is planning to raise equity to expand production capacity at its two main facilities. Demand for its robotic assembly lines has grown steadily over the past three years, and management believes that without new capital, the company risks losing market share to larger competitors that can offer shorter delivery times. To fund the expansion, Altura's board has proposed issuing additional Class A common shares to a mix of institutional and retail investors through a public offering. The founding family, which has controlled the company since its incorporation, holds a separate Class B share class that carries enhanced voting rights but is entitled to the same per-share dividend rights as the Class A shares. Importantly, no existing shareholder will sell shares in the offering, meaning all proceeds raised will go directly to Altura rather than to selling shareholders. A portfolio manager at an asset management firm is evaluating whether to participate in the offering and separately whether to buy existing shares in the secondary market. In reviewing the offering documents, the manager examines the rights attached to each share class and considers how the new issuance would affect the founding family's economic ownership percentage as well as their voting influence over corporate decisions. The manager does not need to calculate exact post-issuance ownership percentages; the relevant conclusion instead depends on understanding the difference in votes per share between the two classes and the fact that only Class A shares are being issued in this transaction. Separately, the manager considers purchasing existing Altura shares directly in the secondary market rather than participating in the primary offering. Exhibit 2 displays the complete sell-side and buy-side liquidity available at the best price levels immediately before a hypothetical order arrives. The manager's proposed order is a market order, which will execute immediately against the lowest available asks until the full order quantity has been purchased, with no hidden orders, trading fees, taxes, or subsequent order-book changes to consider. Finally, an equity analyst covering Altura reviews the company's competitive environment in preparation for a new research report. Altura depends on specialized components that cannot easily be replaced without redesigning its products and obtaining new regulatory recertification, a process that is both costly and time-consuming. The analyst applies an industry-structure framework to evaluate the resulting bargaining power of Altura's suppliers. The analyst's supervisor separately reviews the draft research report to determine whether it communicates the valuation methodology and key assumptions sufficiently for an informed investment decision, noting that the target price was generated using a two-stage free cash flow to equity model but that several material inputs are missing from the draft, as described in Exhibit 3.

      • 3. A private equity analyst is evaluating Meridian Packaging, a privately held producer of standardized packaging materials. The analyst plans to value a minority interest using the guideline public-company method and separately assess Meridian's governance, proposed initial public offering, and competitive environment. The analyst identifies publicly traded packaging companies with broadly comparable products and end markets. Their median forward EV/EBITDA multiple is 7.5×. Meridian is smaller, has more concentrated customers, and has less diversified operations than the guideline companies. The analyst therefore applies the 10.0% downward adjustment shown in Exhibit 1 to the selected multiple. Meridian's normalized EBITDA excludes a nonrecurring plant-relocation expense and is consistent with the EBITDA definition used for the guideline companies. After estimating enterprise value, the analyst will subtract interest-bearing debt and add nonoperating cash to derive equity value. Meridian has no preferred stock, noncontrolling interests, or other nonoperating assets. The interest being valued represents 10.0% of total common equity, has no special control rights, and cannot be readily sold. The analyst therefore applies a discount for lack of marketability to the pro rata value of that minority equity block. No separate control premium is appropriate. Meridian currently has the dual-class capital structure shown in Exhibit 2. All Class B shares are owned by the founder. Except for voting power, Class A and Class B shares have identical economic rights. Voting power is determined by each class's shares outstanding multiplied by its votes per share. Management is considering an initial public offering consisting solely of newly issued Class A shares. As stated in Exhibit 3, none of the founder's or other existing shareholders' shares will be sold in the offering. The offering is therefore intended to raise capital for Meridian rather than provide liquidity to existing owners. The analyst also reviews the industry's competitive structure. Products are weakly differentiated, customer switching costs are low, industry demand is growing slowly, and many similarly sized producers compete aggressively for market share. No information is provided suggesting unusual supplier concentration, material regulatory entry barriers, or proprietary technology that prevents new capacity from entering the industry.

        • 4. Aster Digital is completing an initial public offering and will have two classes of common shares outstanding after the transaction. Class A shares will be publicly traded and carry one vote per share. Class B shares carry ten votes per share and are convertible at the holder's election into Class A shares on a one-for-one basis. The founder owns all Class B shares and some Class A shares. No shares are cross-owned or held in treasury. The offering includes both newly issued Class A shares and existing Class A shares sold by early investors. Under the underwriting agreement, proceeds from newly issued shares are paid to Aster, whereas proceeds from shares sold by existing investors are paid to those investors. All offering figures in Exhibit 2 are before underwriting fees and other issuance costs. Following the first month of trading, analyst Marcus Lee evaluates Aster's share performance using an estimated market model. The model is specified as the security return equal to an intercept plus beta multiplied by the contemporaneous market-index return, plus an abnormal-return residual. Lee uses the parameter estimates and realized returns in Exhibit 3. He does not substitute the risk-free rate or the CAPM expected return into this calculation. Lee's employer has also been engaged by Aster to produce a research report for a fixed cash fee. The payment does not depend on the report's recommendation, target price, or distribution. Lee and his immediate family own no Aster securities. Before publication, Aster's investor-relations department is permitted to identify factual errors in a draft from which the recommendation and target price have been removed. Lee retains sole authority over the valuation, conclusions, wording of opinions, and final recommendation. His employer's policy requires prominent disclosure of issuer-paid research arrangements in the report.

          • 5. Helix Media has two classes of common shares. The classes have identical rights to dividends and liquidation proceeds, but their voting rights differ as shown in Exhibit 1. Founder Elena Varga holds all outstanding Class A shares, while public investors hold all outstanding Class B shares. A portfolio manager considering an investment in Class B wants to distinguish public investors' percentage economic ownership from their percentage of total votes. There are no voting agreements, convertible securities, or unissued shares relevant to the analysis. Helix plans a rights offering available to existing Class B shareholders. Rights are transferable, and the portfolio manager assumes frictionless markets, full subscription, and no change in aggregate company value other than the cash raised. The theoretical ex-rights price should therefore be calculated from the value of the required existing shares plus the subscription payment, divided by the total shares held after exercise. A separate quantitative analyst reviews Helix using a market model estimated from historical monthly returns. The model is Ri = alpha + beta(Rm) + error. The analyst treats the difference between the stock's realized return and its model-predicted return as the abnormal return. The monthly observations and estimated coefficients required for the calculation appear in Exhibit 2; no risk-free-rate adjustment is used in this specified market model. Finally, the brokerage firm employing the analyst intends to distribute a Helix research report to retail and institutional clients. The report contains earnings forecasts, a target price, a buy recommendation, principal risks, and a description of the valuation methods. The firm's beneficial ownership of Helix shares is material information concerning the report's objectivity. Before the planned broad distribution, the analyst orally informed several institutional clients of the holding, but the written report contains no ownership disclosure. The firm is permitted to publish research while holding the shares, provided the conflict is appropriately disclosed. The analyst considers whether the earlier selective oral communication is sufficient or whether the report must be revised.

            • 6. Daniel Cho is valuing Calder Medical Devices, a privately held manufacturer being considered by a family investment office. Calder prepares financial statements under US GAAP. Cho uses a guideline-public-company method based on enterprise value to EBITDA and must normalise Calder's reported EBITDA before applying the selected multiple. During the latest year, Calder incurred a USD 3 million litigation expense arising from a dispute that has been fully settled. Cho concludes that the expense is non-recurring and was deducted in calculating reported EBITDA. Calder's founder also serves as chief executive and receives compensation that is USD 1 million below the market rate for an unrelated chief executive performing the same duties. A buyer would need to incur this additional annual compensation. No other normalising adjustments are necessary. The peer multiple and Calder's normalised EBITDA are defined consistently, and no tax adjustment is required for these EBITDA items. Cho is also asked to estimate the value of a non-controlling ownership interest for which no active market exists. An independently derived marketable minority value is USD 80 million. Based on restricted-stock and pre-IPO evidence adjusted for Calder's circumstances, Cho selects a 20% discount for lack of marketability. The assignment does not require a discount for lack of control, a control premium, or a blockage adjustment. Because Calder is substantially smaller and less diversified than the listed firms used to estimate beta, Cho estimates the required return by adding a size premium and a separately supported company-specific risk premium to the CAPM result. The premiums in Exhibit 2 are additive percentage-point adjustments. The family office has accepted their use for this assignment, and all inputs are nominal annual USD rates. Before distributing his report, Cho's supervisor reviews the draft. The report states a target value and a buy recommendation, and it describes the valuation methods and underlying assumptions. It does not identify material risks that could prevent Calder from achieving forecast sales, including dependence on one regulatory approval and one major distributor. It also presents management's sales forecast as Cho's established fact rather than attributing it to management. The supervisor asks Cho to make the report consistent with professional research-report practices before release.

              • 7. Aisha Patel is analyzing Northbridge Networks, one of five companies supplying specialized communications equipment in its domestic market. She prepares Figure 1 from audited industry sales. Regulatory filings indicate that the five companies shown account for essentially all industry revenue and that imports are immaterial. Products require substantial fixed investment and specialized engineering, creating meaningful barriers to entry. Patel uses the visual distribution of market shares to assess whether rivalry occurs within a concentrated market or a fragmented market. Northbridge has 1,000,000 common shares outstanding, and each share carries one vote. Five directors will be elected at the next annual meeting using cumulative voting. Shareholders may allocate all votes to one candidate or distribute them among candidates. There are no voting agreements, nonvoting shares, or legal restrictions affecting the calculation of the shares required to guarantee election of one director. Northbridge also plans a rights offering to existing common shareholders. Each existing share receives one right, four rights are required to purchase one new share, and the subscription price is USD 44. Immediately before the shares trade ex-rights, Northbridge's common shares trade at USD 50. Transaction costs, taxes, and changes in company value unrelated to the financing are assumed to be zero. Patel intends to calculate the theoretical ex-rights price using the value transferred from existing shares to the newly issued shares. Finally, Patel reviews trading liquidity in another listed equipment supplier. The current sell-side limit order book contains 400 shares offered at USD 25.10 and the next 500 shares offered at USD 25.20. No other sell orders are priced between these levels. A portfolio manager submits an immediately executable market order to buy 600 shares. The order arrives before any cancellation, modification, or new order, and the exchange uses price priority. Commissions and market fees are excluded from the execution-price calculation. Patel treats the industry assessment, voting analysis, rights-offering calculations, industry-characteristics assessment, and order-book calculation as separate elements of her report. None of her conclusions about one element is used as an input into another.

                Flashcards: The industry and competitive analysis process

                1. 1. In company analysis, what is the formula for calculating a company's market share?

                  Show answer

                  \[\text{Market Share} = \frac{\text{Company Revenue}}{\text{Total Industry Market Size}}\]

                2. 2. In competitive analysis, what term describes the extent to which a company can determine selling prices without hurting sales?

                  Show answer

                  Pricing power.

                3. 3. In industry analysis, what type of industry experiences above-average volatility in returns related to economic output?

                  Show answer

                  A cyclical industry.

                4. 4. In technological analysis, what type of innovation fundamentally creates a new market or enters an existing market to create value in a new way?

                  Show answer

                  Disruptive innovation.

                5. 5. In company forecasting, what type of firm is most resistant to input cost inflation?

                  Show answer

                  Vertically integrated companies.

                6. 6. What competitive strategy seeks to make products and services distinctive in terms of type, quality, or delivery?

                  Show answer

                  Differentiation strategy.

                7. 7. In Porter's Five Forces, how does market fragmentation generally affect industry competition?

                  Show answer

                  It increases competition (high rivalry).

                8. 8. In competitive analysis, what term describes an industry evolving toward perfect competition with identical products and no barriers to entry?

                  Show answer

                  Commoditization.

                9. 9. What competitive strategy targets a specific niche market to gain an advantage?

                  Show answer

                  Focus strategy.

                Everything you need for CFA prep

                Get full Oncourse access with lessons, practice questions, flashcards and AI study tools.

                GET STARTED FOR FREE
                75% OFFLimited time offer
                GET 75% OFF